Quantcast

Bamboo tablet not working anymore in Fedora24/Cinnamon environment

classic Classic list List threaded Threaded
15 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
Hi,

I've been running a Bamboo Pen CTL-460 tablet under Fedora 24 - Cinnamon desktop environment for several years without a glitch.
For the last several weeks, the whole has ceased to work; it is not recognized by any software, and has become completely useless. I don't know what has caused this issue, but suspected it could be related to a package upgrade.
Could it be related to this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1397898 ? Though I thought Wayland comes as a default only from Fedora version 25 on.

I'm completely stucked, with several thousands pictures to be treated, and that cannot be done without the tablet.
Thanks for helping,

Marie-Noëlle


--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
Hi,

Thanks a lot for your answer.

Here is the result of the lsusb command:
[marie-noelle@new-host-2 ~]$ lsusb
Bus 002 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 009: ID 046d:c31b Logitech, Inc. Compact Keyboard K300
Bus 002 Device 008: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 007: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 006: ID 056a:00d4 Wacom Co., Ltd CTL-460 [Bamboo Pen (S)]
Bus 002 Device 005: ID 11b0:6148 ATECH FLASH TECHNOLOGY
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 001 Device 004: ID 04f2:b28e Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I'm afraid I have no other machine around to test the hardware. But the tablet light is on, and highlights when the stylus is put onto its surface.

As for Cinnamon, it has been installed on this machine several years ago, and I don't really remember how I proceeded the very first time; Fedora has simply been upgraded once or twice a year since then.

Marie-Noëlle


2017-03-01 14:49 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi,

Can you list the output of 'lsusb' and try the tablet in a different machine to make sure it is not a hardware issue.

Also, if the hardware seems to be fine, how did you install cinnamon on Fedora?

Best,
Aaron


On Feb 28, 2017 11:08 PM, "Marie-Noëlle Augendre" <[hidden email]> wrote:
Hi,

I've been running a Bamboo Pen CTL-460 tablet under Fedora 24 - Cinnamon desktop environment for several years without a glitch.
For the last several weeks, the whole has ceased to work; it is not recognized by any software, and has become completely useless. I don't know what has caused this issue, but suspected it could be related to a package upgrade.
Could it be related to this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1397898 ? Though I thought Wayland comes as a default only from Fedora version 25 on.

I'm completely stucked, with several thousands pictures to be treated, and that cannot be done without the tablet.
Thanks for helping,

Marie-Noëlle


--
 






--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Aaron Armstrong Skomra
Hi,

My guess is that this is an issue with Cinnamon, I doubt there are many people running Cinnamon on Fedora 24 now that Fedora 25 is out, so the relevant parties might not have seen this bug. And, as you said, the tablet will have other problems on Fedora 25. Though I think you should be able to switch F25 to X, last time I checked it was non-trivial.

But let's confirm that the kernel driver and X driver are working first. Run 'sudo evtest' and select the number of the pen device and confirm that the screen fills with input as you move the pen around the tablet.

Then to see about the xdriver, run 'xev', maximize the white window and then confirm that the terminal that you opened xev in continues to update with events as you move only the pen around the tablet.

Best.
Aaron

On Wed, Mar 1, 2017 at 6:06 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi,

Thanks a lot for your answer.

Here is the result of the lsusb command:
[marie-noelle@new-host-2 ~]$ lsusb
Bus 002 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 009: ID 046d:c31b Logitech, Inc. Compact Keyboard K300
Bus 002 Device 008: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 007: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 006: ID 056a:00d4 Wacom Co., Ltd CTL-460 [Bamboo Pen (S)]
Bus 002 Device 005: ID 11b0:6148 ATECH FLASH TECHNOLOGY
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 001 Device 004: ID 04f2:b28e Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I'm afraid I have no other machine around to test the hardware. But the tablet light is on, and highlights when the stylus is put onto its surface.

As for Cinnamon, it has been installed on this machine several years ago, and I don't really remember how I proceeded the very first time; Fedora has simply been upgraded once or twice a year since then.

Marie-Noëlle


2017-03-01 14:49 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi,

Can you list the output of 'lsusb' and try the tablet in a different machine to make sure it is not a hardware issue.

Also, if the hardware seems to be fine, how did you install cinnamon on Fedora?

Best,
Aaron


On Feb 28, 2017 11:08 PM, "Marie-Noëlle Augendre" <[hidden email]> wrote:
Hi,

I've been running a Bamboo Pen CTL-460 tablet under Fedora 24 - Cinnamon desktop environment for several years without a glitch.
For the last several weeks, the whole has ceased to work; it is not recognized by any software, and has become completely useless. I don't know what has caused this issue, but suspected it could be related to a package upgrade.
Could it be related to this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1397898 ? Though I thought Wayland comes as a default only from Fedora version 25 on.

I'm completely stucked, with several thousands pictures to be treated, and that cannot be done without the tablet.
Thanks for helping,

Marie-Noëlle


--
 






--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb





------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Aaron Armstrong Skomra
In reply to this post by Marie-Noëlle Augendre
Hi,

This looks to me (after some off list discussion) that this appears to be a problem with the 4.9 kernel. If you select the 4.8 kernel from the grub menu at startup does the device work for you?

Best,
Aaron

On Wed, Mar 1, 2017 at 6:06 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi,

Thanks a lot for your answer.

Here is the result of the lsusb command:
[marie-noelle@new-host-2 ~]$ lsusb
Bus 002 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 009: ID 046d:c31b Logitech, Inc. Compact Keyboard K300
Bus 002 Device 008: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 007: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 006: ID 056a:00d4 Wacom Co., Ltd CTL-460 [Bamboo Pen (S)]
Bus 002 Device 005: ID 11b0:6148 ATECH FLASH TECHNOLOGY
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 001 Device 004: ID 04f2:b28e Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I'm afraid I have no other machine around to test the hardware. But the tablet light is on, and highlights when the stylus is put onto its surface.

As for Cinnamon, it has been installed on this machine several years ago, and I don't really remember how I proceeded the very first time; Fedora has simply been upgraded once or twice a year since then.

Marie-Noëlle


2017-03-01 14:49 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi,

Can you list the output of 'lsusb' and try the tablet in a different machine to make sure it is not a hardware issue.

Also, if the hardware seems to be fine, how did you install cinnamon on Fedora?

Best,
Aaron


On Feb 28, 2017 11:08 PM, "Marie-Noëlle Augendre" <[hidden email]> wrote:
Hi,

I've been running a Bamboo Pen CTL-460 tablet under Fedora 24 - Cinnamon desktop environment for several years without a glitch.
For the last several weeks, the whole has ceased to work; it is not recognized by any software, and has become completely useless. I don't know what has caused this issue, but suspected it could be related to a package upgrade.
Could it be related to this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1397898 ? Though I thought Wayland comes as a default only from Fedora version 25 on.

I'm completely stucked, with several thousands pictures to be treated, and that cannot be done without the tablet.
Thanks for helping,

Marie-Noëlle


--
 






--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb





------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
Things have never been reliable since my first message 8 days ago.
What works 'best' is boot on
Linux new-host-2 4.9.13-200.fc25.x86_64 #1 SMP Mon Feb 27 16:48:42 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
version (there is a new one, but I don't think the tablet has worked with it even once)
more often (might be always) in 'Cinnamon Software Rendering' mode.

I usually have to reboot 3 or 4 times before the tablet works. And even then, I might 'loose' it.
I don't know whether this might be relevant, but I noticed the tablet ceases to work several times when darktable (RAW development) was running, but I had switched to another window/software to do something else; when I came back to darktable, the tablet worked no longer and I needed to reboot (several times again...) in order to resume working on my photos.

Hope there will be some kind of solution rather soon, as I have tons of pictures to work upon and the tablet is necessary to do that.

Thanks for helping,
Marie-Noëlle


2017-03-09 19:02 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Thu, Mar 9, 2017 at 6:38 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi Aaron,

There was a libwacom update a couple of days ago. But still no improvment in the tablet behaviour: I usually need to boot several times in a row in order to get the tablet to work; and even then, I sometimes 'loose' it, and have to reboot in order to get it again... perhaps.

Hi Marie-Noëlle,

From your previous messages, I though that your tablet was working, but maybe it sounds like it was never reliably working for you. Is that so, or was there a period when it was working?

Also, could you clarify the details of your current Fedora (24 or 25?, kernel version) again. Re-reading our messages makes me think this might not be a kernel issue, but I still want to double check.

Also I'm not sure from this message if 'Cinnamon Software Rendering' still affects your current issue. It seemed like you said using 'Cinnamon Software Rendering' fixed the issue for you. Is that no longer the case?

Also could you send the message to the list so that others could chime in on the issue?

Best,
Aaron
 
Still no news from your side of the pond?

Marie-Noëlle

2017-03-03 17:51 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Fri, Mar 3, 2017 at 8:43 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi,

Some news about the tablet issue: this morning, I was unable to use both F24 and F25 ... till I had the idea to use 'Cinnamon Software Rendering' instead of 'simple' Cinnamon. With it, the tablet seems to work whatever the kernel version is.

There were updates today for both kernel and Cinnamon, and the new versions don't seem to have any influence on the matter.

Still working/testing ...

Thanks for the update, keep me posted!
Marie-Noëlle

2017-03-02 21:41 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Thu, Mar 2, 2017 at 10:52 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Unfortunately, the 4.9 kernel version is the oldest I have (I upgraded yesterday) and dnf refused to downgrade to 4.8 version.
However, I just tried the oldest F24 version I still have, that is also a 4.9 version, but this one appears to work! The tablet is functional again.

What do you advise for now? Is there a bug recorded somewhere, that I can monitor in order to know when the problem is solved in F25?

Your bug may be related to another bug[1], or it may be a different bug. Let's wait and see how your system works for the next few days
before we decide to file the bug or join it to that one.

Best,
Aaron
Marie-Noëlle

2017-03-02 18:40 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi,

This looks to me (after some off list discussion) that this appears to be a problem with the 4.9 kernel. If you select the 4.8 kernel from the grub menu at startup does the device work for you?

Best,
Aaron



--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Announcing the Oxford Dictionaries API! The API offers world-renowned
dictionary content that is easy and intuitive to access. Sign up for an
account today to start using our lexical data to power your apps and
projects. Get started today and enter our developer competition.
http://sdm.link/oxford
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
This morning, I 'lost' the tablet without having even used it!
After boot, I just checked it worked (moving the pen once across the desktop screen), then went to websurfing, and did only that; I didn't launch any other program than Firefox, except for HP connecting via bluetooth. One hour later, moving the pen isn't recognized. :-(

Marie-Noëlle

2017-03-09 21:21 GMT+01:00 Marie-Noëlle Augendre <[hidden email]>:
Things have never been reliable since my first message 8 days ago.
What works 'best' is boot on
Linux new-host-2 4.9.13-200.fc25.x86_64 #1 SMP Mon Feb 27 16:48:42 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
version (there is a new one, but I don't think the tablet has worked with it even once)
more often (might be always) in 'Cinnamon Software Rendering' mode.

I usually have to reboot 3 or 4 times before the tablet works. And even then, I might 'loose' it.
I don't know whether this might be relevant, but I noticed the tablet ceases to work several times when darktable (RAW development) was running, but I had switched to another window/software to do something else; when I came back to darktable, the tablet worked no longer and I needed to reboot (several times again...) in order to resume working on my photos.

Hope there will be some kind of solution rather soon, as I have tons of pictures to work upon and the tablet is necessary to do that.

Thanks for helping,
Marie-Noëlle



2017-03-09 19:02 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Thu, Mar 9, 2017 at 6:38 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi Aaron,

There was a libwacom update a couple of days ago. But still no improvment in the tablet behaviour: I usually need to boot several times in a row in order to get the tablet to work; and even then, I sometimes 'loose' it, and have to reboot in order to get it again... perhaps.

Hi Marie-Noëlle,

From your previous messages, I though that your tablet was working, but maybe it sounds like it was never reliably working for you. Is that so, or was there a period when it was working?

Also, could you clarify the details of your current Fedora (24 or 25?, kernel version) again. Re-reading our messages makes me think this might not be a kernel issue, but I still want to double check.

Also I'm not sure from this message if 'Cinnamon Software Rendering' still affects your current issue. It seemed like you said using 'Cinnamon Software Rendering' fixed the issue for you. Is that no longer the case?

Also could you send the message to the list so that others could chime in on the issue?

Best,
Aaron
 
Still no news from your side of the pond?

Marie-Noëlle

2017-03-03 17:51 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Fri, Mar 3, 2017 at 8:43 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi,

Some news about the tablet issue: this morning, I was unable to use both F24 and F25 ... till I had the idea to use 'Cinnamon Software Rendering' instead of 'simple' Cinnamon. With it, the tablet seems to work whatever the kernel version is.

There were updates today for both kernel and Cinnamon, and the new versions don't seem to have any influence on the matter.

Still working/testing ...

Thanks for the update, keep me posted!
Marie-Noëlle

2017-03-02 21:41 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Thu, Mar 2, 2017 at 10:52 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Unfortunately, the 4.9 kernel version is the oldest I have (I upgraded yesterday) and dnf refused to downgrade to 4.8 version.
However, I just tried the oldest F24 version I still have, that is also a 4.9 version, but this one appears to work! The tablet is functional again.

What do you advise for now? Is there a bug recorded somewhere, that I can monitor in order to know when the problem is solved in F25?

Your bug may be related to another bug[1], or it may be a different bug. Let's wait and see how your system works for the next few days
before we decide to file the bug or join it to that one.

Best,
Aaron
Marie-Noëlle

2017-03-02 18:40 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi,

This looks to me (after some off list discussion) that this appears to be a problem with the 4.9 kernel. If you select the 4.8 kernel from the grub menu at startup does the device work for you?

Best,
Aaron



--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb






--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Announcing the Oxford Dictionaries API! The API offers world-renowned
dictionary content that is easy and intuitive to access. Sign up for an
account today to start using our lexical data to power your apps and
projects. Get started today and enter our developer competition.
http://sdm.link/oxford
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Aaron Armstrong Skomra
HI Marie-Noëlle,

I installed F25 from scratch, tested with the 4.8 kernel then upgraded and tested with 4.9. I did see that, on kernel 4.9 the CTL-460/K would sometimes produce events and sometimes not. I couldn't get any other Wacom devices to produce this behavior, but I do not know if this is because the bug happened to not be in effect when I tested them, or if that this bug only affects the CTL-460. I believe you can install the 4.8 kernel using the instructions at [1].  Please let me know if using kernel 4.8 resolves the situation for you.

Best.
Aaron

On Fri, Mar 10, 2017 at 1:14 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
This morning, I 'lost' the tablet without having even used it!
After boot, I just checked it worked (moving the pen once across the desktop screen), then went to websurfing, and did only that; I didn't launch any other program than Firefox, except for HP connecting via bluetooth. One hour later, moving the pen isn't recognized. :-(

Marie-Noëlle

2017-03-09 21:21 GMT+01:00 Marie-Noëlle Augendre <[hidden email]>:
Things have never been reliable since my first message 8 days ago.
What works 'best' is boot on
Linux new-host-2 4.9.13-200.fc25.x86_64 #1 SMP Mon Feb 27 16:48:42 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
version (there is a new one, but I don't think the tablet has worked with it even once)
more often (might be always) in 'Cinnamon Software Rendering' mode.

I usually have to reboot 3 or 4 times before the tablet works. And even then, I might 'loose' it.
I don't know whether this might be relevant, but I noticed the tablet ceases to work several times when darktable (RAW development) was running, but I had switched to another window/software to do something else; when I came back to darktable, the tablet worked no longer and I needed to reboot (several times again...) in order to resume working on my photos.

Hope there will be some kind of solution rather soon, as I have tons of pictures to work upon and the tablet is necessary to do that.

Thanks for helping,
Marie-Noëlle



2017-03-09 19:02 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Thu, Mar 9, 2017 at 6:38 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi Aaron,

There was a libwacom update a couple of days ago. But still no improvment in the tablet behaviour: I usually need to boot several times in a row in order to get the tablet to work; and even then, I sometimes 'loose' it, and have to reboot in order to get it again... perhaps.

Hi Marie-Noëlle,

From your previous messages, I though that your tablet was working, but maybe it sounds like it was never reliably working for you. Is that so, or was there a period when it was working?

Also, could you clarify the details of your current Fedora (24 or 25?, kernel version) again. Re-reading our messages makes me think this might not be a kernel issue, but I still want to double check.

Also I'm not sure from this message if 'Cinnamon Software Rendering' still affects your current issue. It seemed like you said using 'Cinnamon Software Rendering' fixed the issue for you. Is that no longer the case?

Also could you send the message to the list so that others could chime in on the issue?

Best,
Aaron
 
Still no news from your side of the pond?

Marie-Noëlle

2017-03-03 17:51 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Fri, Mar 3, 2017 at 8:43 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi,

Some news about the tablet issue: this morning, I was unable to use both F24 and F25 ... till I had the idea to use 'Cinnamon Software Rendering' instead of 'simple' Cinnamon. With it, the tablet seems to work whatever the kernel version is.

There were updates today for both kernel and Cinnamon, and the new versions don't seem to have any influence on the matter.

Still working/testing ...

Thanks for the update, keep me posted!
Marie-Noëlle

2017-03-02 21:41 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:


On Thu, Mar 2, 2017 at 10:52 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Unfortunately, the 4.9 kernel version is the oldest I have (I upgraded yesterday) and dnf refused to downgrade to 4.8 version.
However, I just tried the oldest F24 version I still have, that is also a 4.9 version, but this one appears to work! The tablet is functional again.

What do you advise for now? Is there a bug recorded somewhere, that I can monitor in order to know when the problem is solved in F25?

Your bug may be related to another bug[1], or it may be a different bug. Let's wait and see how your system works for the next few days
before we decide to file the bug or join it to that one.

Best,
Aaron
Marie-Noëlle

2017-03-02 18:40 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi,

This looks to me (after some off list discussion) that this appears to be a problem with the 4.9 kernel. If you select the 4.8 kernel from the grub menu at startup does the device work for you?

Best,
Aaron



--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb







--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb






--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb





------------------------------------------------------------------------------
Announcing the Oxford Dictionaries API! The API offers world-renowned
dictionary content that is easy and intuitive to access. Sign up for an
account today to start using our lexical data to power your apps and
projects. Get started today and enter our developer competition.
http://sdm.link/oxford
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
Hi Aaron,

Thanks a lot for your suggestion, but it seems that 4.8 kernel cannot be installed on my computer due to 'conflicting requests'. Even with the '--allowerasing' option, dnf doesn't allow it.

Marie-Noëlle

2017-03-10 21:45 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
HI Marie-Noëlle,

I installed F25 from scratch, tested with the 4.8 kernel then upgraded and tested with 4.9. I did see that, on kernel 4.9 the CTL-460/K would sometimes produce events and sometimes not. I couldn't get any other Wacom devices to produce this behavior, but I do not know if this is because the bug happened to not be in effect when I tested them, or if that this bug only affects the CTL-460. I believe you can install the 4.8 kernel using the instructions at [1].  Please let me know if using kernel 4.8 resolves the situation for you.

Best.
Aaron





--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Announcing the Oxford Dictionaries API! The API offers world-renowned
dictionary content that is easy and intuitive to access. Sign up for an
account today to start using our lexical data to power your apps and
projects. Get started today and enter our developer competition.
http://sdm.link/oxford
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Aaron Armstrong Skomra
Hi Marie-Noëlle,

I'm still looking at this, just to make sure the device I'm working with has the same issue as yours, could run 'journalctl -f', then plug in the tablet, and then send me the output.

Best,
Aaron


On Fri, Mar 10, 2017 at 1:16 PM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi Aaron,

Thanks a lot for your suggestion, but it seems that 4.8 kernel cannot be installed on my computer due to 'conflicting requests'. Even with the '--allowerasing' option, dnf doesn't allow it.

Marie-Noëlle

2017-03-10 21:45 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
HI Marie-Noëlle,

I installed F25 from scratch, tested with the 4.8 kernel then upgraded and tested with 4.9. I did see that, on kernel 4.9 the CTL-460/K would sometimes produce events and sometimes not. I couldn't get any other Wacom devices to produce this behavior, but I do not know if this is because the bug happened to not be in effect when I tested them, or if that this bug only affects the CTL-460. I believe you can install the 4.8 kernel using the instructions at [1].  Please let me know if using kernel 4.8 resolves the situation for you.

Best.
Aaron





--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb





------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
Hi Aaron,

There was an update of the xorg-x11-drv-wacom package a couple of days ago, but it didn't seem to bring much improvement.

Here is the output you asked for:
$ journalctl -f
Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
      Pass -q to turn off this notice.
-- Logs begin at mer. 2016-12-07 18:03:19 CET. --
mars 14 19:15:59 new-host-2 abrt-applet[2033]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 abrt-applet[2033]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 polkit-gnome-au[2174]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 polkit-gnome-au[2174]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 cinnamon-settin[1885]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 cinnamon-settin[1885]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:16:04 new-host-2 dbus-daemon[1733]: [session uid=1000 pid=1733] Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service' requested by ':1.68' (uid=1000 pid=4725 comm="gnome-terminal ")
mars 14 19:16:04 new-host-2 systemd[1711]: Starting GNOME Terminal Server...
mars 14 19:16:04 new-host-2 dbus-daemon[1733]: [session uid=1000 pid=1733] Successfully activated service 'org.gnome.Terminal'
mars 14 19:16:04 new-host-2 systemd[1711]: Started GNOME Terminal Server.
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device (unnamed) (/dev/input/event19)
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "evdev tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'libinput' for '(unnamed)'
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) systemd-logind: failed to take device /dev/input/event19: No such device
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): always reports core events
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event19"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "_source" "server/udev"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) client bug: Invalid path /dev/input/event19
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) libinput: (unnamed): Failed to create a device for /dev/input/event19
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) PreInit returned 2 for "(unnamed)"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) UnloadModule: "libinput"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/mouse1)
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) No input driver specified, ignoring this device.
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) This device may have been added with another device file.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/event6)
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "evdev tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom USB tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen'
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 53 paused 0
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: always reports core events
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen: type not specified, assuming 'stylus'.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen: other types will be automatically added.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen stylus: using pressure threshold of 873 for button 1
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen stylus: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen stylus: hotplugging dependent devices.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'cursor' for this device.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'touch' for this device.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'pad' for this device.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen stylus: hotplugging completed.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.0/0003:056A:00D4.0007/input/input31/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) XINPUT: Adding extended input device "Wacom Bamboo Pen Pen stylus" (type: STYLUS, id 10)
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) keeping acceleration scheme 1
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration profile 0
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration factor: 2.000
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration threshold: 4
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "evdev tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "Wacom USB tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "Wacom tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen eraser'
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: always reports core events
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Type" "eraser"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen eraser: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.0/0003:056A:00D4.0007/input/input31/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) XINPUT: Adding extended input device "Wacom Bamboo Pen Pen eraser" (type: ERASER, id 18)
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) keeping acceleration scheme 1
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration profile 0
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration factor: 2.000
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration threshold: 4

Thanks for your help,
Marie-Noëlle


2017-03-14 18:54 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi Marie-Noëlle,

I'm still looking at this, just to make sure the device I'm working with has the same issue as yours, could run 'journalctl -f', then plug in the tablet, and then send me the output.

Best,
Aaron




--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Aaron Armstrong Skomra
HI Marie-Noëlle,

Sorry, I always put myself in the admin group so I didn't know that journalclt output could be restricted. Could you run that command as root or sudo?

Best,
Aaron

On Tue, Mar 14, 2017 at 11:19 AM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi Aaron,

There was an update of the xorg-x11-drv-wacom package a couple of days ago, but it didn't seem to bring much improvement.

Here is the output you asked for:
$ journalctl -f
Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
      Pass -q to turn off this notice.
-- Logs begin at mer. 2016-12-07 18:03:19 CET. --
mars 14 19:15:59 new-host-2 abrt-applet[2033]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 abrt-applet[2033]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 polkit-gnome-au[2174]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 polkit-gnome-au[2174]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 cinnamon-settin[1885]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:15:59 new-host-2 cinnamon-settin[1885]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 19:16:04 new-host-2 dbus-daemon[1733]: [session uid=1000 pid=1733] Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service' requested by ':1.68' (uid=1000 pid=4725 comm="gnome-terminal ")
mars 14 19:16:04 new-host-2 systemd[1711]: Starting GNOME Terminal Server...
mars 14 19:16:04 new-host-2 dbus-daemon[1733]: [session uid=1000 pid=1733] Successfully activated service 'org.gnome.Terminal'
mars 14 19:16:04 new-host-2 systemd[1711]: Started GNOME Terminal Server.
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device (unnamed) (/dev/input/event19)
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "evdev tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'libinput' for '(unnamed)'
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) systemd-logind: failed to take device /dev/input/event19: No such device
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): always reports core events
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event19"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "_source" "server/udev"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) client bug: Invalid path /dev/input/event19
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) libinput: (unnamed): Failed to create a device for /dev/input/event19
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) PreInit returned 2 for "(unnamed)"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) UnloadModule: "libinput"
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/mouse1)
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) No input driver specified, ignoring this device.
mars 14 19:16:29 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) This device may have been added with another device file.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/event6)
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "evdev tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom USB tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen'
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 53 paused 0
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: always reports core events
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen: type not specified, assuming 'stylus'.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen: other types will be automatically added.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen stylus: using pressure threshold of 873 for button 1
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen stylus: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen stylus: hotplugging dependent devices.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'cursor' for this device.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'touch' for this device.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'pad' for this device.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen stylus: hotplugging completed.
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.0/0003:056A:00D4.0007/input/input31/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) XINPUT: Adding extended input device "Wacom Bamboo Pen Pen stylus" (type: STYLUS, id 10)
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) keeping acceleration scheme 1
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration profile 0
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration factor: 2.000
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration threshold: 4
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "evdev tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "Wacom USB tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "Wacom tablet class"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen eraser'
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: always reports core events
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Type" "eraser"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen eraser: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.0/0003:056A:00D4.0007/input/input31/event6"
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) XINPUT: Adding extended input device "Wacom Bamboo Pen Pen eraser" (type: ERASER, id 18)
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) keeping acceleration scheme 1
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration profile 0
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration factor: 2.000
mars 14 19:16:30 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration threshold: 4

Thanks for your help,
Marie-Noëlle


2017-03-14 18:54 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
Hi Marie-Noëlle,

I'm still looking at this, just to make sure the device I'm working with has the same issue as yours, could run 'journalctl -f', then plug in the tablet, and then send me the output.

Best,
Aaron




--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb





------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
Here you are:

[root@new-host-2 ~]# journalctl -f
-- Logs begin at ven. 2016-12-02 15:01:23 CET. --
mars 14 20:24:13 new-host-2 cinnamon-settin[1885]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 20:24:13 new-host-2 cinnamon-settin[1885]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 20:24:13 new-host-2 cinnamon-settin[1885]: gdk_device_update_tool: assertion 'GDK_IS_DEVICE (device)' failed
mars 14 20:24:19 new-host-2 audit[4999]: USER_AUTH pid=4999 uid=1000 auid=1000 ses=3 msg='op=PAM:authentication grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=new-host-2 addr=? terminal=pts/0 res=success'
mars 14 20:24:19 new-host-2 audit[4999]: USER_ACCT pid=4999 uid=1000 auid=1000 ses=3 msg='op=PAM:accounting grantors=pam_unix,pam_localuser acct="root" exe="/usr/bin/su" hostname=new-host-2 addr=? terminal=pts/0 res=success'
mars 14 20:24:19 new-host-2 su[4999]: (to root) marie-noelle on pts/0
mars 14 20:24:19 new-host-2 audit[4999]: CRED_ACQ pid=4999 uid=1000 auid=1000 ses=3 msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=new-host-2 addr=? terminal=pts/0 res=success'
mars 14 20:24:19 new-host-2 su[4999]: pam_systemd(su-l:session): Cannot create session: Already occupied by a session
mars 14 20:24:19 new-host-2 su[4999]: pam_unix(su-l:session): session opened for user root by (uid=1000)
mars 14 20:24:19 new-host-2 audit[4999]: USER_START pid=4999 uid=1000 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_keyinit,pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/su" hostname=new-host-2 addr=? terminal=pts/0 res=success'
mars 14 20:24:49 new-host-2 kernel: usb 2-1.2.4.1: new full-speed USB device number 14 using ehci-pci
mars 14 20:24:49 new-host-2 kernel: usb 2-1.2.4.1: New USB device found, idVendor=056a, idProduct=00d4
mars 14 20:24:49 new-host-2 kernel: usb 2-1.2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
mars 14 20:24:49 new-host-2 kernel: usb 2-1.2.4.1: Product: CTL-460
mars 14 20:24:49 new-host-2 kernel: usb 2-1.2.4.1: Manufacturer: Wacom Co.,Ltd.
mars 14 20:24:49 new-host-2 kernel: input: Wacom Bamboo Pen Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.0/0003:056A:00D4.0009/input/input37
mars 14 20:24:49 new-host-2 kernel: wacom 0003:056A:00D4.0009: hidraw0: USB HID v1.00 Mouse [Wacom Co.,Ltd. CTL-460] on usb-0000:00:1d.0-1.2.4.1/input0
mars 14 20:24:49 new-host-2 kernel: input: Wacom Bamboo Pen Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.1/0003:056A:00D4.000A/input/input41
mars 14 20:24:49 new-host-2 kernel: wacom 0003:056A:00D4.000A: hidraw5: USB HID v1.00 Device [Wacom Co.,Ltd. CTL-460] on usb-0000:00:1d.0-1.2.4.1/input1
mars 14 20:24:49 new-host-2 mtp-probe[5039]: checking bus 2, device 14: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1"
mars 14 20:24:49 new-host-2 mtp-probe[5039]: bus: 2, device: 14 was not an MTP device
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device (unnamed) (/dev/input/event19)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "evdev tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'libinput' for '(unnamed)'
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) config/udev: Adding input device (unnamed) (/dev/input/event19)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) (unnamed): Applying InputClass "evdev tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) (unnamed): Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) Using input driver 'libinput' for '(unnamed)'
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (EE) systemd-logind: failed to take device /dev/input/event19: No such device
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) (unnamed): always reports core events
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Option "Device" "/dev/input/event19"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Option "_source" "server/udev"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (EE) client bug: Invalid path /dev/input/event19
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (EE) libinput: (unnamed): Failed to create a device for /dev/input/event19
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (EE) PreInit returned 2 for "(unnamed)"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) UnloadModule: "libinput"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) systemd-logind: failed to take device /dev/input/event19: No such device
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) (unnamed): always reports core events
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event19"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "_source" "server/udev"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) client bug: Invalid path /dev/input/event19
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) libinput: (unnamed): Failed to create a device for /dev/input/event19
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) PreInit returned 2 for "(unnamed)"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) UnloadModule: "libinput"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/mouse1)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) No input driver specified, ignoring this device.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) This device may have been added with another device file.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/mouse1)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) No input driver specified, ignoring this device.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) This device may have been added with another device file.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/event6)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "evdev tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom USB tablet class"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom tablet class"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen'
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) config/udev: Adding input device Wacom Bamboo Pen Pen (/dev/input/event6)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Wacom Bamboo Pen Pen: Applying InputClass "evdev tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Wacom Bamboo Pen Pen: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom USB tablet class"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (**) Wacom Bamboo Pen Pen: Applying InputClass "Wacom tablet class"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen'
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 53 paused 0
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen: always reports core events
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event6"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen: type not specified, assuming 'stylus'.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen: other types will be automatically added.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen stylus: using pressure threshold of 873 for button 1
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen stylus: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen stylus: hotplugging dependent devices.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'cursor' for this device.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'touch' for this device.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (EE) Wacom Bamboo Pen Pen stylus: Invalid type 'pad' for this device.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Wacom Bamboo Pen Pen stylus: hotplugging completed.
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.0/0003:056A:00D4.0009/input/input37/event6"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 25 paused 1
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1208]: (II) systemd-logind: releasing fd for 13:70
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) XINPUT: Adding extended input device "Wacom Bamboo Pen Pen stylus" (type: STYLUS, id 10)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) keeping acceleration scheme 1
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration profile 0
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration factor: 2.000
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen stylus: (accel) acceleration threshold: 4
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "evdev tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "libinput tablet catchall"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "Wacom USB tablet class"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: Applying InputClass "Wacom tablet class"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) Using input driver 'wacom' for 'Wacom Bamboo Pen Pen eraser'
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: always reports core events
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Device" "/dev/input/event6"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "Type" "eraser"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (--) Wacom Bamboo Pen Pen eraser: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.1/2-1.2.4.1:1.0/0003:056A:00D4.0009/input/input37/event6"
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (II) XINPUT: Adding extended input device "Wacom Bamboo Pen Pen eraser" (type: ERASER, id 18)
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) keeping acceleration scheme 1
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration profile 0
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration factor: 2.000
mars 14 20:24:49 new-host-2 /usr/libexec/gdm-x-session[1727]: (**) Wacom Bamboo Pen Pen eraser: (accel) acceleration threshold: 4


Marie-Noëlle


2017-03-14 20:12 GMT+01:00 Aaron Armstrong Skomra <[hidden email]>:
HI Marie-Noëlle,

Sorry, I always put myself in the admin group so I didn't know that journalclt output could be restricted. Could you run that command as root or sudo?

Best,
Aaron


--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Marie-Noëlle Augendre
Hi Aaron,

Is there anything else I can do to help diagnose the problem? I've not been able to make the tablet work for more than a week, and am completely stuck...

Marie-Noëlle


--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb




------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Aaron Armstrong Skomra


On Tue, Mar 21, 2017 at 4:13 PM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi Aaron,

Is there anything else I can do to help diagnose the problem? I've not been able to make the tablet work for more than a week, and am completely stuck...

Hi Marie-Noëlle,

I am still testing a fix, if you'd like you can also test it by installing input-wacom from this github branch:

https://github.com/skomra/input-wacom/tree/bamboo-ghost

The instructions for building input-wacom from git are here:

linuxwacom.sourceforge.net/wiki/index.php/Input-wacom

Here is a cheat sheet for the commands:

$modinfo wacom | grep version # we'll use this later to make sure we've installed the new driver
$git clone https://github.com/skomra/input-wacom.git
$cd input-wacom
$git checkout -b bamboo-ghost origin/bamboo-ghost
$./autogen.sh
$make
$sudo make install
$sudo modprobe -r wacom
$sudo modprobe wacom
$modinfo wacom | grep version # make sure the version has updated to v2.00-0.34.0.3.g12cfca0

The bug has to do with how the devices are setup and removed, so if you still see a crash also try after rebooting.

Best,
Aaron
Marie-Noëlle


--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb





------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bamboo tablet not working anymore in Fedora24/Cinnamon environment

Aaron Armstrong Skomra


On Thu, Mar 23, 2017 at 12:40 PM, Marie-Noëlle Augendre <[hidden email]> wrote:
Hi Aaron,

I tried your procedure but it doesn't seem to have worked as expected.
Here is the whole procedure with messages:

When you say it didn't work as expected, you mean the new driver didn't change the behavior at all?

I forot to mention something that's in the wiki about newer fedoras. I forgot to mention that:

"

Note that if building on newer Fedoras (at least Fedora 24), you will need to rebuild your intramfs in order for the changes to be permanent. You can do this by loading the module (directly above) and then issuing the command:

sudo dracut --force

However, if you have manually installed other kernel modules, this may or may not interfere with those modules. We need to investigate further to understand how to use dracut safely.

"
 
[marie-noelle@new-host-2 ~]$ modinfo wacom | grep version
version:        v2.00
srcversion:     989F39390A06C221A79687A
[marie-noelle@new-host-2 ~]$ git clone https://github.com/skomra/input-wacom.git
Clonage dans 'input-wacom'...
remote: Counting objects: 9895, done.
remote: Compressing objects: 100% (12/12), done.
remote: Total 9895 (delta 5), reused 0 (delta 0), pack-reused 9883
Réception d'objets: 100% (9895/9895), 3.60 MiB | 243.00 KiB/s, fait.
Résolution des deltas: 100% (8226/8226), fait.
Vérification de la connectivité... fait.
[marie-noelle@new-host-2 ~]$ cd input-wacom
[marie-noelle@new-host-2 input-wacom]$
[marie-noelle@new-host-2 input-wacom]$ git checkout -b bamboo-ghost origin/bamboo-ghost
La branche bamboo-ghost est paramétrée pour suivre la branche distante bamboo-ghost depuis origin.
Basculement sur la nouvelle branche 'bamboo-ghost'
[marie-noelle@new-host-2 input-wacom]$ ./autogen.sh
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal
aclocal: warning: couldn't open directory 'm4': No such file or directory
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf
autoreconf: running: /usr/bin/autoheader
autoreconf: running: automake --add-missing --copy --no-force
configure.ac:11: installing './compile'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
Makefile.am: installing './INSTALL'
autoreconf: Leaving directory `.'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking for kernel type... Linux
checking for linux-based kernel... yes
checking for kernel source/headers... /lib/modules/4.9.14-200.fc25.x86_64/source
checking kernel version... 4.9.14-200.fc25.x86_64

checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating 2.6.30/Makefile
config.status: creating 2.6.36/Makefile
config.status: creating 2.6.38/Makefile
config.status: creating 3.7/Makefile
config.status: creating 3.17/Makefile
config.status: creating 4.5/Makefile
config.status: creating config.h
config.status: executing depfiles commands
configure:
----------------------------------------
  BUILD ENVIRONMENT:
       linux kernel - yes 4.5
      kernel source - yes /lib/modules/4.9.14-200.fc25.x86_64/source

NOTE: The kernel drivers included in this package are only tested with the
X Wacom driver built from xf86-input-wacom. If you are running an X server
version older than 1.7, please use the drivers provided by the linuxwacom
package.

Please run 'make && make install'.
[marie-noelle@new-host-2 input-wacom]$ make
(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/marie-noelle/input-wacom/missing autoheader)
rm -f stamp-h1
touch config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make  all-recursive
make[1] : on entre dans le répertoire « /home/marie-noelle/input-wacom »
Making all in 4.5
make[2] : on entre dans le répertoire « /home/marie-noelle/input-wacom/4.5 »
    Building input-wacom drivers for 4.5 kernel.
make -C /lib/modules/4.9.14-200.fc25.x86_64/source M=/home/marie-noelle/input-wacom/4.5
make[3] : on entre dans le répertoire « /usr/src/kernels/4.9.14-200.fc25.x86_64 »
  LD      /home/marie-noelle/input-wacom/4.5/built-in.o
  CC [M]  /home/marie-noelle/input-wacom/4.5/wacom_wac.o
  CC [M]  /home/marie-noelle/input-wacom/4.5/wacom_sys.o
/home/marie-noelle/input-wacom/4.5/wacom_sys.c: Dans la fonction « wacom_show_remote_mode »:
/home/marie-noelle/input-wacom/4.5/wacom_sys.c:1681:11: attention : comparaison est toujours vraie en raison d'une gamme limitée de type de données [-Wtype-limits]
  if (mode >= 0 && mode < 3)
           ^~
  LD [M]  /home/marie-noelle/input-wacom/4.5/wacom.o
  CC [M]  /home/marie-noelle/input-wacom/4.5/wacom_w8001.o
  Building modules, stage 2.
  MODPOST 2 modules
  CC      /home/marie-noelle/input-wacom/4.5/wacom.mod.o
  LD [M]  /home/marie-noelle/input-wacom/4.5/wacom.ko
  CC      /home/marie-noelle/input-wacom/4.5/wacom_w8001.mod.o
  LD [M]  /home/marie-noelle/input-wacom/4.5/wacom_w8001.ko
make[3] : on quitte le répertoire « /usr/src/kernels/4.9.14-200.fc25.x86_64 »
make[2] : on quitte le répertoire « /home/marie-noelle/input-wacom/4.5 »
make[2] : on entre dans le répertoire « /home/marie-noelle/input-wacom »
make[2] : on quitte le répertoire « /home/marie-noelle/input-wacom »
make[1] : on quitte le répertoire « /home/marie-noelle/input-wacom »
[marie-noelle@new-host-2 input-wacom]$ sudo make install
[sudo] Mot de passe de marie-noelle :
marie-noelle n'apparaît pas dans le fichier sudoers. Cet événement sera signalé.
[marie-noelle@new-host-2 input-wacom]$ su -
Mot de passe :
[root@new-host-2 ~]# make install
make: *** Aucune règle pour fabriquer la cible « install ». Arrêt.
[root@new-host-2 ~]# cd /home/marie-noelle/input-wacom/
[root@new-host-2 input-wacom]# make install
Making install in 4.5
make[1] : on entre dans le répertoire « /home/marie-noelle/input-wacom/4.5 »
make -C /lib/modules/4.9.14-200.fc25.x86_64/source M=/home/marie-noelle/input-wacom/4.5 modules_install
make[2] : on entre dans le répertoire « /usr/src/kernels/4.9.14-200.fc25.x86_64 »
  INSTALL /home/marie-noelle/input-wacom/4.5/wacom.ko
At main.c:158:
- SSL error:02001002:system library:fopen:No such file or directory: bss_file.c:175
- SSL error:2006D080:BIO routines:BIO_new_file:no such file: bss_file.c:182
sign-file: certs/signing_key.pem: No such file or directory
  INSTALL /home/marie-noelle/input-wacom/4.5/wacom_w8001.ko
At main.c:158:
- SSL error:02001002:system library:fopen:No such file or directory: bss_file.c:175
- SSL error:2006D080:BIO routines:BIO_new_file:no such file: bss_file.c:182
sign-file: certs/signing_key.pem: No such file or directory
  DEPMOD  4.9.14-200.fc25.x86_64
make[2] : on quitte le répertoire « /usr/src/kernels/4.9.14-200.fc25.x86_64 »
mkdir -p /etc/depmod.d
echo "override wacom * extra" > /etc/depmod.d/input-wacom.conf
PATH="/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin:/bin:/sbin" depmod -a 4.9.14-200.fc25.x86_64
make[1] : on quitte le répertoire « /home/marie-noelle/input-wacom/4.5 »
make[1] : on entre dans le répertoire « /home/marie-noelle/input-wacom »
make[2] : on entre dans le répertoire « /home/marie-noelle/input-wacom »
make[2]: rien à faire pour « install-exec-am ».
make[2]: rien à faire pour « install-data-am ».
make[2] : on quitte le répertoire « /home/marie-noelle/input-wacom »
make[1] : on quitte le répertoire « /home/marie-noelle/input-wacom »
[root@new-host-2 input-wacom]# modprobe -r wacom
[root@new-host-2 input-wacom]# modprobe wacom
[root@new-host-2 input-wacom]# exit
déconnexion
[marie-noelle@new-host-2 input-wacom]$ modinfo wacom | grep version
version:        v2.00-0.33.0.50.g794d5ca
srcversion:     357F0B66686869A335CF61E
[marie-noelle@new-host-2 input-wacom]$


In the mean time, I had tested with the Fedora Design Suite as a LiveUSB distro. The tablet seemed to work partially (with an additional cursor as a cross, and only one button working), but the system parameters said "no tablet detected".


The second cursor means that you are running Wayland. To my knowledge, there aren't any applications that support Wacom devices on Wayland yet. To use Wacom tablets on F25 you'll have to select GNOME with Xorg when logging in.

Best,
Aaron
 
The tablet did work for a short time with my usual distro a bit earlier in the day, so I've been able to develop a dozen of pictures in darktable, but it is now off again.

Marie-Noëlle



--
 
Découvrez mes photos sur mon site ou ma page Facebook




et tous mes livres-photos sur le site Blurb





------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Loading...