Quantcast

CTH-490 not initialized on archlinux

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

CTH-490 not initialized on archlinux

falcon83@humanoid.net
Hi, thanks for your work.
I'm testing my cth-490 (it's an intuos art) on a fully updated archlinux
with the testing AMD catalyst driver v 15.9-4 installed, the source
compiles and installs properly i think, but the tablet is completely
silent. I'm using xf86-input-wacom from the archlinux repository: v
0.31.0-1.
These should be the outputs you need, more or less:

`uname -a`
Linux this-machine 4.1.9-2-lts #1 SMP Thu Oct 1 15:21:06 CEST 2015
x86_64 GNU/Linux

`dmesg | grep -i wacom`
[    5.715343] input: Wacom HID Pen as
/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:056A:033C.0001/input/input4
[    5.715549] wacom 0003:056A:033C.0001: hidraw0: USB HID v1.10 Device
[Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input0
[    5.715700] input: Wacom HID Pen as
/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:056A:033C.0002/input/input6
[    5.715863] wacom 0003:056A:033C.0002: hidraw1: USB HID v1.10 Device
[Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input1
[    5.716018] input: Wacom HID Pen as
/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:056A:033C.0003/input/input8
[    5.716177] wacom 0003:056A:033C.0003: hidraw2: USB HID v1.10 Mouse
[Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input2

`lsusb | grep -i wacom`
Bus 002 Device 006: ID 056a:033c Wacom Co., Ltd

here you can find my Xorg.0.log: http://pastebin.com/C6HQsv3Z

On 07/10/2015 14:02, [hidden email] wrote:

> I'm pleased to announce that a pre-release version of our "input-wacom"
> driver which includes support for Wacom's newest line of Intuos tablets
> is now available for testing. If you're comfortable with compiling and
> installing pre-release kernel code and have one of these new tablets,
> please continue reading. A final release which supports a wider variety
> of Linux distributions is expected in a few/several weeks.
>
> ~~~~~~~~~~~~~~~~
>
> Before continuing, please ensure you are using Linux 3.17 or newer
> (`uname -r`). This pre-release version is not compatible with older
> kernels at this time. Also ensure that you are using one of the devices
> listed below (`lsusb`) which require the use of this version:
>
> 056a:033b
> 056a:033c
> 056a:033d
> 056a:033e
>
> Prior to compiling the driver, you will need to make sure that the
> necessary development headers are installed. If you are running a
> Debian-based distribution such as Ubuntu or Mint, run:
>
>      $ sudo apt-get install linux-headers-$(uname -r)
>
> Users of Red Hat-based distributions like Fedora or CentOS should
> instead run the following:
>
>      $ sudo yum install gcc kernel-devel
>
>
> Once the headers have been installed, download a copy of the pre-release
> driver code from [1]. Extract the archive's contents, navigate to the
> directory in a terminal, and run the following sequence of commands:
>
> $ ./autogen.sh
> $ make
> $ sudo make install
> $ sudo depmod -a
>
> If a command fails with an error, please reply with the complete output
> of the failing command. Otherwise, reboot to load the module into the
> kernel. If the tablet does not work, please reply with the attached
> output of `uname -a`, `lsusb`, `dmesg`, and
> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
> exist). Any additional information that you can provide (such as the
> tablet, distribution, etc. would also be valuable in helping our
> developers replicate the issue).
>
> This code has been tested locally and seems to work well, but there's
> always the chance that it has trouble with a particular distribution.



------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CTH-490 not initialized on archlinux

Jason Gerecke
It looks like a few different people are having issues getting these
patches to detect their tablet properly. I'm wondering if something is
going wrong in the installation process... Could you please provide me
with the output of the following commands?

$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
$ ls -l /lib/modules/$(uname -r)/extra/wacom*
$ grep wacom /lib/modules/$(uname -r)/modules.dep

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 10/7/2015 7:22 AM, [hidden email] wrote:

> Hi, thanks for your work.
> I'm testing my cth-490 (it's an intuos art) on a fully updated archlinux
> with the testing AMD catalyst driver v 15.9-4 installed, the source
> compiles and installs properly i think, but the tablet is completely
> silent. I'm using xf86-input-wacom from the archlinux repository: v
> 0.31.0-1.
> These should be the outputs you need, more or less:
>
> `uname -a`
> Linux this-machine 4.1.9-2-lts #1 SMP Thu Oct 1 15:21:06 CEST 2015
> x86_64 GNU/Linux
>
> `dmesg | grep -i wacom`
> [    5.715343] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:056A:033C.0001/input/input4
> [    5.715549] wacom 0003:056A:033C.0001: hidraw0: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input0
> [    5.715700] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:056A:033C.0002/input/input6
> [    5.715863] wacom 0003:056A:033C.0002: hidraw1: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input1
> [    5.716018] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:056A:033C.0003/input/input8
> [    5.716177] wacom 0003:056A:033C.0003: hidraw2: USB HID v1.10 Mouse
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input2
>
> `lsusb | grep -i wacom`
> Bus 002 Device 006: ID 056a:033c Wacom Co., Ltd
>
> here you can find my Xorg.0.log: http://pastebin.com/C6HQsv3Z
>
> On 07/10/2015 14:02, [hidden email] wrote:
>> I'm pleased to announce that a pre-release version of our "input-wacom"
>> driver which includes support for Wacom's newest line of Intuos tablets
>> is now available for testing. If you're comfortable with compiling and
>> installing pre-release kernel code and have one of these new tablets,
>> please continue reading. A final release which supports a wider variety
>> of Linux distributions is expected in a few/several weeks.
>>
>> ~~~~~~~~~~~~~~~~
>>
>> Before continuing, please ensure you are using Linux 3.17 or newer
>> (`uname -r`). This pre-release version is not compatible with older
>> kernels at this time. Also ensure that you are using one of the devices
>> listed below (`lsusb`) which require the use of this version:
>>
>> 056a:033b
>> 056a:033c
>> 056a:033d
>> 056a:033e
>>
>> Prior to compiling the driver, you will need to make sure that the
>> necessary development headers are installed. If you are running a
>> Debian-based distribution such as Ubuntu or Mint, run:
>>
>>      $ sudo apt-get install linux-headers-$(uname -r)
>>
>> Users of Red Hat-based distributions like Fedora or CentOS should
>> instead run the following:
>>
>>      $ sudo yum install gcc kernel-devel
>>
>>
>> Once the headers have been installed, download a copy of the pre-release
>> driver code from [1]. Extract the archive's contents, navigate to the
>> directory in a terminal, and run the following sequence of commands:
>>
>> $ ./autogen.sh
>> $ make
>> $ sudo make install
>> $ sudo depmod -a
>>
>> If a command fails with an error, please reply with the complete output
>> of the failing command. Otherwise, reboot to load the module into the
>> kernel. If the tablet does not work, please reply with the attached
>> output of `uname -a`, `lsusb`, `dmesg`, and
>> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>> exist). Any additional information that you can provide (such as the
>> tablet, distribution, etc. would also be valuable in helping our
>> developers replicate the issue).
>>
>> This code has been tested locally and seems to work well, but there's
>> always the chance that it has trouble with a particular distribution.
>
>
>
> ------------------------------------------------------------------------------
> Full-scale, agent-less Infrastructure Monitoring from a single dashboard
> Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
> Physical-Virtual-Cloud Infrastructure monitoring from one console
> Real user monitoring with APM Insights and performance trend reports
> Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
> _______________________________________________
> Linuxwacom-discuss mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>

------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CTH-490 not initialized on archlinux

Bruno Keymolen


bruno@bruno-Dell ~ $ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124308 Oct  3 01:54 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko
bruno@bruno-Dell ~ $  ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144708 Oct  6 18:03 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14635 Oct  6 18:03 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko
bruno@bruno-Dell ~ $  grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko
bruno@bruno-Dell ~ $ 

Thanks,

Bruno


On Thu, Oct 8, 2015 at 12:44 AM, Jason Gerecke <[hidden email]> wrote:
It looks like a few different people are having issues getting these
patches to detect their tablet properly. I'm wondering if something is
going wrong in the installation process... Could you please provide me
with the output of the following commands?

$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
$ ls -l /lib/modules/$(uname -r)/extra/wacom*
$ grep wacom /lib/modules/$(uname -r)/modules.dep

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 10/7/2015 7:22 AM, [hidden email] wrote:
> Hi, thanks for your work.
> I'm testing my cth-490 (it's an intuos art) on a fully updated archlinux
> with the testing AMD catalyst driver v 15.9-4 installed, the source
> compiles and installs properly i think, but the tablet is completely
> silent. I'm using xf86-input-wacom from the archlinux repository: v
> 0.31.0-1.
> These should be the outputs you need, more or less:
>
> `uname -a`
> Linux this-machine 4.1.9-2-lts #1 SMP Thu Oct 1 15:21:06 CEST 2015
> x86_64 GNU/Linux
>
> `dmesg | grep -i wacom`
> [    5.715343] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:056A:033C.0001/input/input4
> [    5.715549] wacom 0003:056A:033C.0001: hidraw0: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input0
> [    5.715700] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:056A:033C.0002/input/input6
> [    5.715863] wacom 0003:056A:033C.0002: hidraw1: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input1
> [    5.716018] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:056A:033C.0003/input/input8
> [    5.716177] wacom 0003:056A:033C.0003: hidraw2: USB HID v1.10 Mouse
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input2
>
> `lsusb | grep -i wacom`
> Bus 002 Device 006: ID 056a:033c Wacom Co., Ltd
>
> here you can find my Xorg.0.log: http://pastebin.com/C6HQsv3Z
>
> On 07/10/2015 14:02, [hidden email] wrote:
>> I'm pleased to announce that a pre-release version of our "input-wacom"
>> driver which includes support for Wacom's newest line of Intuos tablets
>> is now available for testing. If you're comfortable with compiling and
>> installing pre-release kernel code and have one of these new tablets,
>> please continue reading. A final release which supports a wider variety
>> of Linux distributions is expected in a few/several weeks.
>>
>> ~~~~~~~~~~~~~~~~
>>
>> Before continuing, please ensure you are using Linux 3.17 or newer
>> (`uname -r`). This pre-release version is not compatible with older
>> kernels at this time. Also ensure that you are using one of the devices
>> listed below (`lsusb`) which require the use of this version:
>>
>> 056a:033b
>> 056a:033c
>> 056a:033d
>> 056a:033e
>>
>> Prior to compiling the driver, you will need to make sure that the
>> necessary development headers are installed. If you are running a
>> Debian-based distribution such as Ubuntu or Mint, run:
>>
>>      $ sudo apt-get install linux-headers-$(uname -r)
>>
>> Users of Red Hat-based distributions like Fedora or CentOS should
>> instead run the following:
>>
>>      $ sudo yum install gcc kernel-devel
>>
>>
>> Once the headers have been installed, download a copy of the pre-release
>> driver code from [1]. Extract the archive's contents, navigate to the
>> directory in a terminal, and run the following sequence of commands:
>>
>> $ ./autogen.sh
>> $ make
>> $ sudo make install
>> $ sudo depmod -a
>>
>> If a command fails with an error, please reply with the complete output
>> of the failing command. Otherwise, reboot to load the module into the
>> kernel. If the tablet does not work, please reply with the attached
>> output of `uname -a`, `lsusb`, `dmesg`, and
>> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>> exist). Any additional information that you can provide (such as the
>> tablet, distribution, etc. would also be valuable in helping our
>> developers replicate the issue).
>>
>> This code has been tested locally and seems to work well, but there's
>> always the chance that it has trouble with a particular distribution.
>
>
>
> ------------------------------------------------------------------------------
> Full-scale, agent-less Infrastructure Monitoring from a single dashboard
> Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
> Physical-Virtual-Cloud Infrastructure monitoring from one console
> Real user monitoring with APM Insights and performance trend reports
> Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
> _______________________________________________
> Linuxwacom-discuss mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>

------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CTH-490 not initialized on archlinux

Ping Cheng-2
Bruno,

I think the newly built driver was not copied to the original driver path. Please try the following:

$ sudo rmmod wacom
$ sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko

If that still doesn't make your tablet work, please let us know.

Ping

On Wednesday, October 7, 2015, Bruno Keymolen <[hidden email]> wrote:


bruno@bruno-Dell ~ $ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124308 Oct  3 01:54 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko
bruno@bruno-Dell ~ $  ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144708 Oct  6 18:03 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14635 Oct  6 18:03 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko
bruno@bruno-Dell ~ $  grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko
bruno@bruno-Dell ~ $ 

Thanks,

Bruno


On Thu, Oct 8, 2015 at 12:44 AM, Jason Gerecke <<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;killertofu@gmail.com&#39;);" target="_blank">killertofu@...> wrote:
It looks like a few different people are having issues getting these
patches to detect their tablet properly. I'm wondering if something is
going wrong in the installation process... Could you please provide me
with the output of the following commands?

$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
$ ls -l /lib/modules/$(uname -r)/extra/wacom*
$ grep wacom /lib/modules/$(uname -r)/modules.dep

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 10/7/2015 7:22 AM, <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;falcon83@humanoid.net&#39;);" target="_blank">falcon83@... wrote:
> Hi, thanks for your work.
> I'm testing my cth-490 (it's an intuos art) on a fully updated archlinux
> with the testing AMD catalyst driver v 15.9-4 installed, the source
> compiles and installs properly i think, but the tablet is completely
> silent. I'm using xf86-input-wacom from the archlinux repository: v
> 0.31.0-1.
> These should be the outputs you need, more or less:
>
> `uname -a`
> Linux this-machine 4.1.9-2-lts #1 SMP Thu Oct 1 15:21:06 CEST 2015
> x86_64 GNU/Linux
>
> `dmesg | grep -i wacom`
> [    5.715343] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:056A:033C.0001/input/input4
> [    5.715549] wacom 0003:056A:033C.0001: hidraw0: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input0
> [    5.715700] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:056A:033C.0002/input/input6
> [    5.715863] wacom 0003:056A:033C.0002: hidraw1: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input1
> [    5.716018] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:056A:033C.0003/input/input8
> [    5.716177] wacom 0003:056A:033C.0003: hidraw2: USB HID v1.10 Mouse
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input2
>
> `lsusb | grep -i wacom`
> Bus 002 Device 006: ID 056a:033c Wacom Co., Ltd
>
> here you can find my Xorg.0.log: http://pastebin.com/C6HQsv3Z
>
> On 07/10/2015 14:02, <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;linuxwacom-discuss-request@lists.sourceforge.net&#39;);" target="_blank">linuxwacom-discuss-request@... wrote:
>> I'm pleased to announce that a pre-release version of our "input-wacom"
>> driver which includes support for Wacom's newest line of Intuos tablets
>> is now available for testing. If you're comfortable with compiling and
>> installing pre-release kernel code and have one of these new tablets,
>> please continue reading. A final release which supports a wider variety
>> of Linux distributions is expected in a few/several weeks.
>>
>> ~~~~~~~~~~~~~~~~
>>
>> Before continuing, please ensure you are using Linux 3.17 or newer
>> (`uname -r`). This pre-release version is not compatible with older
>> kernels at this time. Also ensure that you are using one of the devices
>> listed below (`lsusb`) which require the use of this version:
>>
>> 056a:033b
>> 056a:033c
>> 056a:033d
>> 056a:033e
>>
>> Prior to compiling the driver, you will need to make sure that the
>> necessary development headers are installed. If you are running a
>> Debian-based distribution such as Ubuntu or Mint, run:
>>
>>      $ sudo apt-get install linux-headers-$(uname -r)
>>
>> Users of Red Hat-based distributions like Fedora or CentOS should
>> instead run the following:
>>
>>      $ sudo yum install gcc kernel-devel
>>
>>
>> Once the headers have been installed, download a copy of the pre-release
>> driver code from [1]. Extract the archive's contents, navigate to the
>> directory in a terminal, and run the following sequence of commands:
>>
>> $ ./autogen.sh
>> $ make
>> $ sudo make install
>> $ sudo depmod -a
>>
>> If a command fails with an error, please reply with the complete output
>> of the failing command. Otherwise, reboot to load the module into the
>> kernel. If the tablet does not work, please reply with the attached
>> output of `uname -a`, `lsusb`, `dmesg`, and
>> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>> exist). Any additional information that you can provide (such as the
>> tablet, distribution, etc. would also be valuable in helping our
>> developers replicate the issue).
>>
>> This code has been tested locally and seems to work well, but there's
>> always the chance that it has trouble with a particular distribution.
>
>
>
> ------------------------------------------------------------------------------
> Full-scale, agent-less Infrastructure Monitoring from a single dashboard
> Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
> Physical-Virtual-Cloud Infrastructure monitoring from one console
> Real user monitoring with APM Insights and performance trend reports
> Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
> _______________________________________________
> Linuxwacom-discuss mailing list
> <a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Linuxwacom-discuss@lists.sourceforge.net&#39;);" target="_blank">Linuxwacom-discuss@...
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>

------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
<a href="javascript:_e(%7B%7D,&#39;cvml&#39;,&#39;Linuxwacom-discuss@lists.sourceforge.net&#39;);" target="_blank">Linuxwacom-discuss@...
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CTH-490 not initialized on archlinux

Bruno Keymolen
Jason,

(our mails crossed) Yes idd loading manually works! 

Thanks so much for this awesome work!

Bruno


On Thu, Oct 8, 2015 at 6:54 AM, Ping Cheng <[hidden email]> wrote:
Bruno,

I think the newly built driver was not copied to the original driver path. Please try the following:

$ sudo rmmod wacom
$ sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko

If that still doesn't make your tablet work, please let us know.

Ping

On Wednesday, October 7, 2015, Bruno Keymolen <[hidden email]> wrote:


bruno@bruno-Dell ~ $ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124308 Oct  3 01:54 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko
bruno@bruno-Dell ~ $  ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144708 Oct  6 18:03 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14635 Oct  6 18:03 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko
bruno@bruno-Dell ~ $  grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko
bruno@bruno-Dell ~ $ 

Thanks,

Bruno


On Thu, Oct 8, 2015 at 12:44 AM, Jason Gerecke <[hidden email]> wrote:
It looks like a few different people are having issues getting these
patches to detect their tablet properly. I'm wondering if something is
going wrong in the installation process... Could you please provide me
with the output of the following commands?

$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
$ ls -l /lib/modules/$(uname -r)/extra/wacom*
$ grep wacom /lib/modules/$(uname -r)/modules.dep

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 10/7/2015 7:22 AM, [hidden email] wrote:
> Hi, thanks for your work.
> I'm testing my cth-490 (it's an intuos art) on a fully updated archlinux
> with the testing AMD catalyst driver v 15.9-4 installed, the source
> compiles and installs properly i think, but the tablet is completely
> silent. I'm using xf86-input-wacom from the archlinux repository: v
> 0.31.0-1.
> These should be the outputs you need, more or less:
>
> `uname -a`
> Linux this-machine 4.1.9-2-lts #1 SMP Thu Oct 1 15:21:06 CEST 2015
> x86_64 GNU/Linux
>
> `dmesg | grep -i wacom`
> [    5.715343] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:056A:033C.0001/input/input4
> [    5.715549] wacom 0003:056A:033C.0001: hidraw0: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input0
> [    5.715700] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:056A:033C.0002/input/input6
> [    5.715863] wacom 0003:056A:033C.0002: hidraw1: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input1
> [    5.716018] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:056A:033C.0003/input/input8
> [    5.716177] wacom 0003:056A:033C.0003: hidraw2: USB HID v1.10 Mouse
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input2
>
> `lsusb | grep -i wacom`
> Bus 002 Device 006: ID 056a:033c Wacom Co., Ltd
>
> here you can find my Xorg.0.log: http://pastebin.com/C6HQsv3Z
>
> On 07/10/2015 14:02, [hidden email] wrote:
>> I'm pleased to announce that a pre-release version of our "input-wacom"
>> driver which includes support for Wacom's newest line of Intuos tablets
>> is now available for testing. If you're comfortable with compiling and
>> installing pre-release kernel code and have one of these new tablets,
>> please continue reading. A final release which supports a wider variety
>> of Linux distributions is expected in a few/several weeks.
>>
>> ~~~~~~~~~~~~~~~~
>>
>> Before continuing, please ensure you are using Linux 3.17 or newer
>> (`uname -r`). This pre-release version is not compatible with older
>> kernels at this time. Also ensure that you are using one of the devices
>> listed below (`lsusb`) which require the use of this version:
>>
>> 056a:033b
>> 056a:033c
>> 056a:033d
>> 056a:033e
>>
>> Prior to compiling the driver, you will need to make sure that the
>> necessary development headers are installed. If you are running a
>> Debian-based distribution such as Ubuntu or Mint, run:
>>
>>      $ sudo apt-get install linux-headers-$(uname -r)
>>
>> Users of Red Hat-based distributions like Fedora or CentOS should
>> instead run the following:
>>
>>      $ sudo yum install gcc kernel-devel
>>
>>
>> Once the headers have been installed, download a copy of the pre-release
>> driver code from [1]. Extract the archive's contents, navigate to the
>> directory in a terminal, and run the following sequence of commands:
>>
>> $ ./autogen.sh
>> $ make
>> $ sudo make install
>> $ sudo depmod -a
>>
>> If a command fails with an error, please reply with the complete output
>> of the failing command. Otherwise, reboot to load the module into the
>> kernel. If the tablet does not work, please reply with the attached
>> output of `uname -a`, `lsusb`, `dmesg`, and
>> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>> exist). Any additional information that you can provide (such as the
>> tablet, distribution, etc. would also be valuable in helping our
>> developers replicate the issue).
>>
>> This code has been tested locally and seems to work well, but there's
>> always the chance that it has trouble with a particular distribution.
>
>
>
> ------------------------------------------------------------------------------
> Full-scale, agent-less Infrastructure Monitoring from a single dashboard
> Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
> Physical-Virtual-Cloud Infrastructure monitoring from one console
> Real user monitoring with APM Insights and performance trend reports
> Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
> _______________________________________________
> Linuxwacom-discuss mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>

------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss



------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CTH-490 not initialized on archlinux

falcon83@humanoid.net
In reply to this post by falcon83@humanoid.net
Ping,

Your suggestion worked for me, so I tried to:

#sudo mv /lib/modules/$(uname -r)/kernel/drivers/hid/wacom.ko.gz
/lib/modules/$(uname -r)/kernel/drivers/hid/wacom-bak
#sudo cp /lib/modules/$(uname -r)/extra/wacom.ko.gz /lib/modules/$(uname
-r)/kernel/drivers/hid/

and now my tablet is initialized properly every time I reboot or
disconnect-connect it and:

`xsetwacom --list devices`
Wacom Intuos PT S 2 Pad pad         id: 10    type: PAD
Wacom Intuos PT S 2 Finger touch    id: 11    type: TOUCH
Wacom Intuos PT S 2 Pen stylus      id: 12    type: STYLUS

I haven't tested it that much but it looks like it's working, I'll try
to configure and tinker with it a little
and update you if something goes wrong.
Thanks again for your work, you're awesome.

On Thu, Oct 8, 2015 at 6:54 AM, Ping Cheng <pinglinux@...> wrote:

> Bruno,
>
> I think the newly built driver was not copied to the original driver path.
> Please try the following:
>
> $ sudo rmmod wacom
> $ sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko
>
> If that still doesn't make your tablet work, please let us know.
>
> Ping
>
> On Wednesday, October 7, 2015, Bruno Keymolen <[hidden email]>
> wrote:
>
>>>
>>> bruno@bruno-Dell ~ $ ls -l /lib/modules/$(uname
>>> -r)/kernel/drivers/hid/wacom*
>>> -rw-r--r-- 1 root root 124308 Oct  3 01:54
>>> /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko
>>> bruno@bruno-Dell ~ $  ls -l /lib/modules/$(uname -r)/extra/wacom*
>>> -rw-r--r-- 1 root root 144708 Oct  6 18:03
>>> /lib/modules/3.19.0-30-generic/extra/wacom.ko
>>> -rw-r--r-- 1 root root  14635 Oct  6 18:03
>>> /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko
>>> bruno@bruno-Dell ~ $  grep wacom /lib/modules/$(uname -r)/modules.dep
>>> kernel/drivers/input/tablet/wacom_serial4.ko:
>>> kernel/drivers/input/touchscreen/wacom_w8001.ko:
>>> kernel/drivers/input/touchscreen/wacom_i2c.ko:
>>> kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko
>>> bruno@bruno-Dell ~ $
>>>
>>> Thanks,
>>>
>>> Bruno
>>>
>>>
>>> On Thu, Oct 8, 2015 at 12:44 AM, Jason Gerecke <[hidden email]>
>>> wrote:
>>>
>>>> It looks like a few different people are having issues getting these
>>>> patches to detect their tablet properly. I'm wondering if something is
>>>> going wrong in the installation process... Could you please provide me
>>>> with the output of the following commands?
>>>>
>>>> $ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
>>>> $ ls -l /lib/modules/$(uname -r)/extra/wacom*
>>>> $ grep wacom /lib/modules/$(uname -r)/modules.dep
>>>>
>>>> Jason
>>>> ---
>>>> Now instead of four in the eights place /
>>>> you?ve got three, ?Cause you added one /
>>>> (That is to say, eight) to the two, /
>>>> But you can?t take seven from three, /
>>>> So you look at the sixty-fours....


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CTH-490 not initialized on archlinux

Ping Cheng-2
Thank you falcon for the good news and for sharing your commands with the list. That helps others while we improve the installer.

Your message made my day (well, at least made my early morning ;-).

Enjoy your tablet!

Ping

On Thu, Oct 8, 2015 at 5:43 AM, [hidden email] <[hidden email]> wrote:
Ping,

Your suggestion worked for me, so I tried to:

#sudo mv /lib/modules/$(uname -r)/kernel/drivers/hid/wacom.ko.gz
/lib/modules/$(uname -r)/kernel/drivers/hid/wacom-bak
#sudo cp /lib/modules/$(uname -r)/extra/wacom.ko.gz /lib/modules/$(uname
-r)/kernel/drivers/hid/

and now my tablet is initialized properly every time I reboot or
disconnect-connect it and:

`xsetwacom --list devices`
Wacom Intuos PT S 2 Pad pad         id: 10    type: PAD
Wacom Intuos PT S 2 Finger touch    id: 11    type: TOUCH
Wacom Intuos PT S 2 Pen stylus      id: 12    type: STYLUS

I haven't tested it that much but it looks like it's working, I'll try
to configure and tinker with it a little
and update you if something goes wrong.
Thanks again for your work, you're awesome.

On Thu, Oct 8, 2015 at 6:54 AM, Ping Cheng <pinglinux@...> wrote:

> Bruno,
>
> I think the newly built driver was not copied to the original driver path.
> Please try the following:
>
> $ sudo rmmod wacom
> $ sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko
>
> If that still doesn't make your tablet work, please let us know.
>
> Ping
>
> On Wednesday, October 7, 2015, Bruno Keymolen <[hidden email]>
> wrote:
>
>>>
>>> bruno@bruno-Dell ~ $ ls -l /lib/modules/$(uname
>>> -r)/kernel/drivers/hid/wacom*
>>> -rw-r--r-- 1 root root 124308 Oct  3 01:54
>>> /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko
>>> bruno@bruno-Dell ~ $  ls -l /lib/modules/$(uname -r)/extra/wacom*
>>> -rw-r--r-- 1 root root 144708 Oct  6 18:03
>>> /lib/modules/3.19.0-30-generic/extra/wacom.ko
>>> -rw-r--r-- 1 root root  14635 Oct  6 18:03
>>> /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko
>>> bruno@bruno-Dell ~ $  grep wacom /lib/modules/$(uname -r)/modules.dep
>>> kernel/drivers/input/tablet/wacom_serial4.ko:
>>> kernel/drivers/input/touchscreen/wacom_w8001.ko:
>>> kernel/drivers/input/touchscreen/wacom_i2c.ko:
>>> kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko
>>> bruno@bruno-Dell ~ $
>>>
>>> Thanks,
>>>
>>> Bruno
>>>
>>>
>>> On Thu, Oct 8, 2015 at 12:44 AM, Jason Gerecke <[hidden email]>
>>> wrote:
>>>
>>>> It looks like a few different people are having issues getting these
>>>> patches to detect their tablet properly. I'm wondering if something is
>>>> going wrong in the installation process... Could you please provide me
>>>> with the output of the following commands?
>>>>
>>>> $ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
>>>> $ ls -l /lib/modules/$(uname -r)/extra/wacom*
>>>> $ grep wacom /lib/modules/$(uname -r)/modules.dep
>>>>
>>>> Jason
>>>> ---
>>>> Now instead of four in the eights place /
>>>> you?ve got three, ?Cause you added one /
>>>> (That is to say, eight) to the two, /
>>>> But you can?t take seven from three, /
>>>> So you look at the sixty-fours....


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: CTH-490 not initialized on archlinux

Jason Gerecke
In reply to this post by Bruno Keymolen
Looks like the issue is that modules.dep isn't being updated to
reference the compiled/installed driver. It still has a stale
reference to the distribution-provided "kernel/drivers/hid/wacom.ko"
rather than "extra/wacom.ko". From what I understand, running `depmod
-a` after installing the driver is supposed to (...and at least for me
*does*...) regenerate the references in modules.dep.

Try running `sudo depmod
/lib/modules/3.19.0-30-generic/extra/wacom.ko` and then reboot. If the
tablet doesn't work, re-run `grep wacom /lib/modules/$(uname
-r)/modules.dep` and  `ls -l /lib/modules/$(uname -r)/modules.dep` so
I can see if the file is even being updated...

Replacing the distribution-provided driver as falcon83 did is one
solution that we used to suggest in the past. It has the potential of
confusing the system's package management system, but it does work.

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one  /
(That is to say, eight) to the two,     /
But you can’t take seven from three,    /
So you look at the sixty-fours....

On Wed, Oct 7, 2015 at 9:35 PM, Bruno Keymolen <[hidden email]> wrote:

>
>
> bruno@bruno-Dell ~ $ ls -l /lib/modules/$(uname
> -r)/kernel/drivers/hid/wacom*
> -rw-r--r-- 1 root root 124308 Oct  3 01:54
> /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko
> bruno@bruno-Dell ~ $  ls -l /lib/modules/$(uname -r)/extra/wacom*
> -rw-r--r-- 1 root root 144708 Oct  6 18:03
> /lib/modules/3.19.0-30-generic/extra/wacom.ko
> -rw-r--r-- 1 root root  14635 Oct  6 18:03
> /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko
> bruno@bruno-Dell ~ $  grep wacom /lib/modules/$(uname -r)/modules.dep
> kernel/drivers/input/tablet/wacom_serial4.ko:
> kernel/drivers/input/touchscreen/wacom_w8001.ko:
> kernel/drivers/input/touchscreen/wacom_i2c.ko:
> kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko
> bruno@bruno-Dell ~ $
>
> Thanks,
>
> Bruno
>
>
> On Thu, Oct 8, 2015 at 12:44 AM, Jason Gerecke <[hidden email]> wrote:
>>
>> It looks like a few different people are having issues getting these
>> patches to detect their tablet properly. I'm wondering if something is
>> going wrong in the installation process... Could you please provide me
>> with the output of the following commands?
>>
>> $ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
>> $ ls -l /lib/modules/$(uname -r)/extra/wacom*
>> $ grep wacom /lib/modules/$(uname -r)/modules.dep
>>
>> Jason
>> ---
>> Now instead of four in the eights place /
>> you’ve got three, ‘Cause you added one /
>> (That is to say, eight) to the two, /
>> But you can’t take seven from three, /
>> So you look at the sixty-fours....
>>
>> On 10/7/2015 7:22 AM, [hidden email] wrote:
>> > Hi, thanks for your work.
>> > I'm testing my cth-490 (it's an intuos art) on a fully updated archlinux
>> > with the testing AMD catalyst driver v 15.9-4 installed, the source
>> > compiles and installs properly i think, but the tablet is completely
>> > silent. I'm using xf86-input-wacom from the archlinux repository: v
>> > 0.31.0-1.
>> > These should be the outputs you need, more or less:
>> >
>> > `uname -a`
>> > Linux this-machine 4.1.9-2-lts #1 SMP Thu Oct 1 15:21:06 CEST 2015
>> > x86_64 GNU/Linux
>> >
>> > `dmesg | grep -i wacom`
>> > [    5.715343] input: Wacom HID Pen as
>> >
>> > /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:056A:033C.0001/input/input4
>> > [    5.715549] wacom 0003:056A:033C.0001: hidraw0: USB HID v1.10 Device
>> > [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input0
>> > [    5.715700] input: Wacom HID Pen as
>> >
>> > /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:056A:033C.0002/input/input6
>> > [    5.715863] wacom 0003:056A:033C.0002: hidraw1: USB HID v1.10 Device
>> > [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input1
>> > [    5.716018] input: Wacom HID Pen as
>> >
>> > /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:056A:033C.0003/input/input8
>> > [    5.716177] wacom 0003:056A:033C.0003: hidraw2: USB HID v1.10 Mouse
>> > [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:02.0-3/input2
>> >
>> > `lsusb | grep -i wacom`
>> > Bus 002 Device 006: ID 056a:033c Wacom Co., Ltd
>> >
>> > here you can find my Xorg.0.log: http://pastebin.com/C6HQsv3Z
>> >
>> > On 07/10/2015 14:02, [hidden email]
>> > wrote:
>> >> I'm pleased to announce that a pre-release version of our "input-wacom"
>> >> driver which includes support for Wacom's newest line of Intuos tablets
>> >> is now available for testing. If you're comfortable with compiling and
>> >> installing pre-release kernel code and have one of these new tablets,
>> >> please continue reading. A final release which supports a wider variety
>> >> of Linux distributions is expected in a few/several weeks.
>> >>
>> >> ~~~~~~~~~~~~~~~~
>> >>
>> >> Before continuing, please ensure you are using Linux 3.17 or newer
>> >> (`uname -r`). This pre-release version is not compatible with older
>> >> kernels at this time. Also ensure that you are using one of the devices
>> >> listed below (`lsusb`) which require the use of this version:
>> >>
>> >> 056a:033b
>> >> 056a:033c
>> >> 056a:033d
>> >> 056a:033e
>> >>
>> >> Prior to compiling the driver, you will need to make sure that the
>> >> necessary development headers are installed. If you are running a
>> >> Debian-based distribution such as Ubuntu or Mint, run:
>> >>
>> >>      $ sudo apt-get install linux-headers-$(uname -r)
>> >>
>> >> Users of Red Hat-based distributions like Fedora or CentOS should
>> >> instead run the following:
>> >>
>> >>      $ sudo yum install gcc kernel-devel
>> >>
>> >>
>> >> Once the headers have been installed, download a copy of the
>> >> pre-release
>> >> driver code from [1]. Extract the archive's contents, navigate to the
>> >> directory in a terminal, and run the following sequence of commands:
>> >>
>> >> $ ./autogen.sh
>> >> $ make
>> >> $ sudo make install
>> >> $ sudo depmod -a
>> >>
>> >> If a command fails with an error, please reply with the complete output
>> >> of the failing command. Otherwise, reboot to load the module into the
>> >> kernel. If the tablet does not work, please reply with the attached
>> >> output of `uname -a`, `lsusb`, `dmesg`, and
>> >> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>> >> exist). Any additional information that you can provide (such as the
>> >> tablet, distribution, etc. would also be valuable in helping our
>> >> developers replicate the issue).
>> >>
>> >> This code has been tested locally and seems to work well, but there's
>> >> always the chance that it has trouble with a particular distribution.
>> >
>> >
>> >
>> >
>> > ------------------------------------------------------------------------------
>> > Full-scale, agent-less Infrastructure Monitoring from a single dashboard
>> > Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
>> > Physical-Virtual-Cloud Infrastructure monitoring from one console
>> > Real user monitoring with APM Insights and performance trend reports
>> > Learn More
>> > http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
>> > _______________________________________________
>> > Linuxwacom-discuss mailing list
>> > [hidden email]
>> > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>> >
>>
>>
>> ------------------------------------------------------------------------------
>> Full-scale, agent-less Infrastructure Monitoring from a single dashboard
>> Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
>> Physical-Virtual-Cloud Infrastructure monitoring from one console
>> Real user monitoring with APM Insights and performance trend reports
>> Learn More
>> http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
>> _______________________________________________
>> Linuxwacom-discuss mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>
>

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Loading...