Quantcast

Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

classic Classic list List threaded Threaded
34 messages Options
12
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
I'm pleased to announce that a pre-release version of our "input-wacom"
driver which includes support for Wacom's newest line of Intuos tablets
is now available for testing. If you're comfortable with compiling and
installing pre-release kernel code and have one of these new tablets,
please continue reading. A final release which supports a wider variety
of Linux distributions is expected in a few/several weeks.

~~~~~~~~~~~~~~~~

Before continuing, please ensure you are using Linux 3.17 or newer
(`uname -r`). This pre-release version is not compatible with older
kernels at this time. Also ensure that you are using one of the devices
listed below (`lsusb`) which require the use of this version:

056a:033b
056a:033c
056a:033d
056a:033e

Prior to compiling the driver, you will need to make sure that the
necessary development headers are installed. If you are running a
Debian-based distribution such as Ubuntu or Mint, run:

   $ sudo apt-get install linux-headers-$(uname -r)

Users of Red Hat-based distributions like Fedora or CentOS should
instead run the following:

   $ sudo yum install gcc kernel-devel


Once the headers have been installed, download a copy of the pre-release
driver code from [1]. Extract the archive's contents, navigate to the
directory in a terminal, and run the following sequence of commands:

$ ./autogen.sh
$ make
$ sudo make install
$ sudo depmod -a

If a command fails with an error, please reply with the complete output
of the failing command. Otherwise, reboot to load the module into the
kernel. If the tablet does not work, please reply with the attached
output of `uname -a`, `lsusb`, `dmesg`, and
'~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
exist). Any additional information that you can provide (such as the
tablet, distribution, etc. would also be valuable in helping our
developers replicate the issue).

This code has been tested locally and seems to work well, but there's
always the chance that it has trouble with a particular distribution.

[1]:
https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Bruno Keymolen
Thanks Jason, this is great work!


I do have a compilation error on Linux Mint 17.2 and a 3.19 kernel:

Thanks,

Bruno


bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ make
make  all-recursive
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
Making all in 3.17
make[2]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
    Building input-wacom drivers for 2.6 kernel.
make -C /lib/modules/3.19.0-30-generic/build M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17
make[3]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
  LD      /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/built-in.o
  CC [M]  /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o
/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c: In function ‘wacom_remote_irq’:
/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:701:6: error: wrong type argument to unary exclamation mark
  if (!wacom->battery &&
      ^
make[4]: *** [/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o] Error 1
make[3]: *** [_module_/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17] Error 2
make[3]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make: *** [all] Error 2
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 


$ uname -a
Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ 


On Mon, Oct 5, 2015 at 11:37 PM, Jason Gerecke <[hidden email]> wrote:
I'm pleased to announce that a pre-release version of our "input-wacom"
driver which includes support for Wacom's newest line of Intuos tablets
is now available for testing. If you're comfortable with compiling and
installing pre-release kernel code and have one of these new tablets,
please continue reading. A final release which supports a wider variety
of Linux distributions is expected in a few/several weeks.

~~~~~~~~~~~~~~~~

Before continuing, please ensure you are using Linux 3.17 or newer
(`uname -r`). This pre-release version is not compatible with older
kernels at this time. Also ensure that you are using one of the devices
listed below (`lsusb`) which require the use of this version:

056a:033b
056a:033c
056a:033d
056a:033e

Prior to compiling the driver, you will need to make sure that the
necessary development headers are installed. If you are running a
Debian-based distribution such as Ubuntu or Mint, run:

   $ sudo apt-get install linux-headers-$(uname -r)

Users of Red Hat-based distributions like Fedora or CentOS should
instead run the following:

   $ sudo yum install gcc kernel-devel


Once the headers have been installed, download a copy of the pre-release
driver code from [1]. Extract the archive's contents, navigate to the
directory in a terminal, and run the following sequence of commands:

$ ./autogen.sh
$ make
$ sudo make install
$ sudo depmod -a

If a command fails with an error, please reply with the complete output
of the failing command. Otherwise, reboot to load the module into the
kernel. If the tablet does not work, please reply with the attached
output of `uname -a`, `lsusb`, `dmesg`, and
'~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
exist). Any additional information that you can provide (such as the
tablet, distribution, etc. would also be valuable in helping our
developers replicate the issue).

This code has been tested locally and seems to work well, but there's
always the chance that it has trouble with a particular distribution.

[1]:
https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Philip Brown
In reply to this post by Jason Gerecke
I'm pleased to announce 033b compiles fine on Fedora 22 and after copying the wacom.ko module ala:

mv /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko.xz /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko
cp 3.17/wacom.ko /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko

and a reboot she comes up fine.

Awesome, Thanks so much!!!




On Mon, Oct 5, 2015 at 11:37 PM, Jason Gerecke <[hidden email]> wrote:
I'm pleased to announce that a pre-release version of our "input-wacom"
driver which includes support for Wacom's newest line of Intuos tablets
is now available for testing. If you're comfortable with compiling and
installing pre-release kernel code and have one of these new tablets,
please continue reading. A final release which supports a wider variety
of Linux distributions is expected in a few/several weeks.

~~~~~~~~~~~~~~~~

Before continuing, please ensure you are using Linux 3.17 or newer
(`uname -r`). This pre-release version is not compatible with older
kernels at this time. Also ensure that you are using one of the devices
listed below (`lsusb`) which require the use of this version:

056a:033b
056a:033c
056a:033d
056a:033e

Prior to compiling the driver, you will need to make sure that the
necessary development headers are installed. If you are running a
Debian-based distribution such as Ubuntu or Mint, run:

   $ sudo apt-get install linux-headers-$(uname -r)

Users of Red Hat-based distributions like Fedora or CentOS should
instead run the following:

   $ sudo yum install gcc kernel-devel


Once the headers have been installed, download a copy of the pre-release
driver code from [1]. Extract the archive's contents, navigate to the
directory in a terminal, and run the following sequence of commands:

$ ./autogen.sh
$ make
$ sudo make install
$ sudo depmod -a

If a command fails with an error, please reply with the complete output
of the failing command. Otherwise, reboot to load the module into the
kernel. If the tablet does not work, please reply with the attached
output of `uname -a`, `lsusb`, `dmesg`, and
'~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
exist). Any additional information that you can provide (such as the
tablet, distribution, etc. would also be valuable in helping our
developers replicate the issue).

This code has been tested locally and seems to work well, but there's
always the chance that it has trouble with a particular distribution.

[1]:
https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jean-Marie Gouarné
In reply to this post by Jason Gerecke
Hi Jason,

I got a compile failure on Ubuntu 14.04.3 with kernel 3.19.0-30-generic.

The issue comes from a "wrong type argument" in 3.17/wacom_wac.c line 701.

If I replace "!wacom->battery" by "!wacom->battery.dev" in line 701, it
compiles fine.

However I don't have any of the newly supported Wacom devices at hand,
so I can't check the features.

I reproduce the full make report below (with wacom_wac.c "as is" in the
distribution).

Many thanks for the job !

--

make  all-recursive
make[1]: Entering directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
Making all in 3.17
make[2]: Entering directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
     Building input-wacom drivers for 2.6 kernel.
make -C /lib/modules/3.19.0-30-generic/build
M=/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17
make[3]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
   LD
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/built-in.o
   CC [M]
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:
In function ‘wacom_remote_irq’:
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:701:6:
error: wrong type argument to unary exclamation mark
   if (!wacom->battery &&
       ^
make[4]: ***
[/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o]
Error 1
make[3]: ***
[_module_/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17]
Error 2
make[3]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make: *** [all] Error 2


Le 05/10/2015 23:37, Jason Gerecke a écrit :

> I'm pleased to announce that a pre-release version of our "input-wacom"
> driver which includes support for Wacom's newest line of Intuos tablets
> is now available for testing. If you're comfortable with compiling and
> installing pre-release kernel code and have one of these new tablets,
> please continue reading. A final release which supports a wider variety
> of Linux distributions is expected in a few/several weeks.
>
> ~~~~~~~~~~~~~~~~
>
> Before continuing, please ensure you are using Linux 3.17 or newer
> (`uname -r`). This pre-release version is not compatible with older
> kernels at this time. Also ensure that you are using one of the devices
> listed below (`lsusb`) which require the use of this version:
>
> 056a:033b
> 056a:033c
> 056a:033d
> 056a:033e
>
> Prior to compiling the driver, you will need to make sure that the
> necessary development headers are installed. If you are running a
> Debian-based distribution such as Ubuntu or Mint, run:
>
>     $ sudo apt-get install linux-headers-$(uname -r)
>
> Users of Red Hat-based distributions like Fedora or CentOS should
> instead run the following:
>
>     $ sudo yum install gcc kernel-devel
>
>
> Once the headers have been installed, download a copy of the pre-release
> driver code from [1]. Extract the archive's contents, navigate to the
> directory in a terminal, and run the following sequence of commands:
>
> $ ./autogen.sh
> $ make
> $ sudo make install
> $ sudo depmod -a
>
> If a command fails with an error, please reply with the complete output
> of the failing command. Otherwise, reboot to load the module into the
> kernel. If the tablet does not work, please reply with the attached
> output of `uname -a`, `lsusb`, `dmesg`, and
> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
> exist). Any additional information that you can provide (such as the
> tablet, distribution, etc. would also be valuable in helping our
> developers replicate the issue).
>
> This code has been tested locally and seems to work well, but there's
> always the chance that it has trouble with a particular distribution.
>
> [1]:
> https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>
> Jason
> ---
> Now instead of four in the eights place /
> you’ve got three, ‘Cause you added one /
> (That is to say, eight) to the two, /
> But you can’t take seven from three, /
> So you look at the sixty-fours....


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Marcus Gisslén
I tired Jean-Maries fix and it compiled without errors but it could not recognize my Intuos.

A part of dmesg:
[   72.237808] usb 2-1.1: new full-speed USB device number 4 using ehci-pci
[   72.335131] usb 2-1.1: New USB device found, idVendor=056a, idProduct=033c
[   72.335138] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   72.335142] usb 2-1.1: Product: Intuos PTS
[   72.335146] usb 2-1.1: Manufacturer: Wacom Co.,Ltd.
[   72.340000] input: Wacom HID Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:056A:033C.0004/input/input21
[   72.340193] wacom 0003:056A:033C.0004: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input0
[   72.341717] input: Wacom HID Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:056A:033C.0005/input/input23
[   72.341954] wacom 0003:056A:033C.0005: hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input1
[   72.343590] input: Wacom HID Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:056A:033C.0006/input/input25
[   72.343771] wacom 0003:056A:033C.0006: hidraw2: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input2
[   82.824829] usb 2-1.1: USB disconnect, device number 4


tis 6 okt. 2015 kl 10:36 skrev Jean-Marie Gouarné <[hidden email]>:
Hi Jason,

I got a compile failure on Ubuntu 14.04.3 with kernel 3.19.0-30-generic.

The issue comes from a "wrong type argument" in 3.17/wacom_wac.c line 701.

If I replace "!wacom->battery" by "!wacom->battery.dev" in line 701, it
compiles fine.

However I don't have any of the newly supported Wacom devices at hand,
so I can't check the features.

I reproduce the full make report below (with wacom_wac.c "as is" in the
distribution).

Many thanks for the job !

--

make  all-recursive
make[1]: Entering directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
Making all in 3.17
make[2]: Entering directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
     Building input-wacom drivers for 2.6 kernel.
make -C /lib/modules/3.19.0-30-generic/build
M=/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17
make[3]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
   LD
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/built-in.o
   CC [M]
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:
In function ‘wacom_remote_irq’:
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:701:6:
error: wrong type argument to unary exclamation mark
   if (!wacom->battery &&
       ^
make[4]: ***
[/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o]
Error 1
make[3]: ***
[_module_/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17]
Error 2
make[3]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make: *** [all] Error 2


Le 05/10/2015 23:37, Jason Gerecke a écrit :
> I'm pleased to announce that a pre-release version of our "input-wacom"
> driver which includes support for Wacom's newest line of Intuos tablets
> is now available for testing. If you're comfortable with compiling and
> installing pre-release kernel code and have one of these new tablets,
> please continue reading. A final release which supports a wider variety
> of Linux distributions is expected in a few/several weeks.
>
> ~~~~~~~~~~~~~~~~
>
> Before continuing, please ensure you are using Linux 3.17 or newer
> (`uname -r`). This pre-release version is not compatible with older
> kernels at this time. Also ensure that you are using one of the devices
> listed below (`lsusb`) which require the use of this version:
>
> 056a:033b
> 056a:033c
> 056a:033d
> 056a:033e
>
> Prior to compiling the driver, you will need to make sure that the
> necessary development headers are installed. If you are running a
> Debian-based distribution such as Ubuntu or Mint, run:
>
>     $ sudo apt-get install linux-headers-$(uname -r)
>
> Users of Red Hat-based distributions like Fedora or CentOS should
> instead run the following:
>
>     $ sudo yum install gcc kernel-devel
>
>
> Once the headers have been installed, download a copy of the pre-release
> driver code from [1]. Extract the archive's contents, navigate to the
> directory in a terminal, and run the following sequence of commands:
>
> $ ./autogen.sh
> $ make
> $ sudo make install
> $ sudo depmod -a
>
> If a command fails with an error, please reply with the complete output
> of the failing command. Otherwise, reboot to load the module into the
> kernel. If the tablet does not work, please reply with the attached
> output of `uname -a`, `lsusb`, `dmesg`, and
> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
> exist). Any additional information that you can provide (such as the
> tablet, distribution, etc. would also be valuable in helping our
> developers replicate the issue).
>
> This code has been tested locally and seems to work well, but there's
> always the chance that it has trouble with a particular distribution.
>
> [1]:
> https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>
> Jason
> ---
> Now instead of four in the eights place /
> you’ve got three, ‘Cause you added one /
> (That is to say, eight) to the two, /
> But you can’t take seven from three, /
> So you look at the sixty-fours....


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Ping Cheng-2
Which kernel version do you use? 3.19 as well?

I'll have to find a device with your product ID to test on 3.19...

Ping

On Tue, Oct 6, 2015 at 1:55 AM, Marcus Gisslén <[hidden email]> wrote:
I tired Jean-Maries fix and it compiled without errors but it could not recognize my Intuos.

A part of dmesg:
[   72.237808] usb 2-1.1: new full-speed USB device number 4 using ehci-pci
[   72.335131] usb 2-1.1: New USB device found, idVendor=056a, idProduct=033c
[   72.335138] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   72.335142] usb 2-1.1: Product: Intuos PTS
[   72.335146] usb 2-1.1: Manufacturer: Wacom Co.,Ltd.
[   72.340000] input: Wacom HID Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:056A:033C.0004/input/input21
[   72.340193] wacom 0003:056A:033C.0004: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input0
[   72.341717] input: Wacom HID Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:056A:033C.0005/input/input23
[   72.341954] wacom 0003:056A:033C.0005: hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input1
[   72.343590] input: Wacom HID Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:056A:033C.0006/input/input25
[   72.343771] wacom 0003:056A:033C.0006: hidraw2: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input2
[   82.824829] usb 2-1.1: USB disconnect, device number 4


tis 6 okt. 2015 kl 10:36 skrev Jean-Marie Gouarné <[hidden email]>:
Hi Jason,

I got a compile failure on Ubuntu 14.04.3 with kernel 3.19.0-30-generic.

The issue comes from a "wrong type argument" in 3.17/wacom_wac.c line 701.

If I replace "!wacom->battery" by "!wacom->battery.dev" in line 701, it
compiles fine.

However I don't have any of the newly supported Wacom devices at hand,
so I can't check the features.

I reproduce the full make report below (with wacom_wac.c "as is" in the
distribution).

Many thanks for the job !

--

make  all-recursive
make[1]: Entering directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
Making all in 3.17
make[2]: Entering directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
     Building input-wacom drivers for 2.6 kernel.
make -C /lib/modules/3.19.0-30-generic/build
M=/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17
make[3]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
   LD
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/built-in.o
   CC [M]
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:
In function ‘wacom_remote_irq’:
/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:701:6:
error: wrong type argument to unary exclamation mark
   if (!wacom->battery &&
       ^
make[4]: ***
[/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o]
Error 1
make[3]: ***
[_module_/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17]
Error 2
make[3]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make: *** [all] Error 2


Le 05/10/2015 23:37, Jason Gerecke a écrit :
> I'm pleased to announce that a pre-release version of our "input-wacom"
> driver which includes support for Wacom's newest line of Intuos tablets
> is now available for testing. If you're comfortable with compiling and
> installing pre-release kernel code and have one of these new tablets,
> please continue reading. A final release which supports a wider variety
> of Linux distributions is expected in a few/several weeks.
>
> ~~~~~~~~~~~~~~~~
>
> Before continuing, please ensure you are using Linux 3.17 or newer
> (`uname -r`). This pre-release version is not compatible with older
> kernels at this time. Also ensure that you are using one of the devices
> listed below (`lsusb`) which require the use of this version:
>
> 056a:033b
> 056a:033c
> 056a:033d
> 056a:033e
>
> Prior to compiling the driver, you will need to make sure that the
> necessary development headers are installed. If you are running a
> Debian-based distribution such as Ubuntu or Mint, run:
>
>     $ sudo apt-get install linux-headers-$(uname -r)
>
> Users of Red Hat-based distributions like Fedora or CentOS should
> instead run the following:
>
>     $ sudo yum install gcc kernel-devel
>
>
> Once the headers have been installed, download a copy of the pre-release
> driver code from [1]. Extract the archive's contents, navigate to the
> directory in a terminal, and run the following sequence of commands:
>
> $ ./autogen.sh
> $ make
> $ sudo make install
> $ sudo depmod -a
>
> If a command fails with an error, please reply with the complete output
> of the failing command. Otherwise, reboot to load the module into the
> kernel. If the tablet does not work, please reply with the attached
> output of `uname -a`, `lsusb`, `dmesg`, and
> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
> exist). Any additional information that you can provide (such as the
> tablet, distribution, etc. would also be valuable in helping our
> developers replicate the issue).
>
> This code has been tested locally and seems to work well, but there's
> always the chance that it has trouble with a particular distribution.
>
> [1]:
> https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>
> Jason
> ---
> Now instead of four in the eights place /
> you’ve got three, ‘Cause you added one /
> (That is to say, eight) to the two, /
> But you can’t take seven from three, /
> So you look at the sixty-fours....


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss



------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
In reply to this post by Philip Brown
Thanks for the feedback, Philip.

Out of curiosity, did you try running `make install` and `depmod -a` as
outlined in the instructions? Theoretically the driver should work after
a reboot if you perform those two steps, but I've heard that it doesn't
always work for some people (and wonder if it might be the cause of some
of the issues reported by others). If you copied the modules manually
because the install/depmod/reboot steps didn't seem to make the driver
work, I'd like to know a bit more about your setup to try and understand
the failure.

Jason

On 10/6/2015 12:18 AM, Philip Brown wrote:

> I'm pleased to announce 033b compiles fine on Fedora 22 and after
> copying the wacom.ko module ala:
>
> mv /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko.xz
> /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko
> cp 3.17/wacom.ko
> /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko
>
> and a reboot she comes up fine.
>
> Awesome, Thanks so much!!!
>
>
>
>
> On Mon, Oct 5, 2015 at 11:37 PM, Jason Gerecke <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     I'm pleased to announce that a pre-release version of our "input-wacom"
>     driver which includes support for Wacom's newest line of Intuos tablets
>     is now available for testing. If you're comfortable with compiling and
>     installing pre-release kernel code and have one of these new tablets,
>     please continue reading. A final release which supports a wider variety
>     of Linux distributions is expected in a few/several weeks.
>
>     ~~~~~~~~~~~~~~~~
>
>     Before continuing, please ensure you are using Linux 3.17 or newer
>     (`uname -r`). This pre-release version is not compatible with older
>     kernels at this time. Also ensure that you are using one of the devices
>     listed below (`lsusb`) which require the use of this version:
>
>     056a:033b
>     056a:033c
>     056a:033d
>     056a:033e
>
>     Prior to compiling the driver, you will need to make sure that the
>     necessary development headers are installed. If you are running a
>     Debian-based distribution such as Ubuntu or Mint, run:
>
>        $ sudo apt-get install linux-headers-$(uname -r)
>
>     Users of Red Hat-based distributions like Fedora or CentOS should
>     instead run the following:
>
>        $ sudo yum install gcc kernel-devel
>
>
>     Once the headers have been installed, download a copy of the pre-release
>     driver code from [1]. Extract the archive's contents, navigate to the
>     directory in a terminal, and run the following sequence of commands:
>
>     $ ./autogen.sh
>     $ make
>     $ sudo make install
>     $ sudo depmod -a
>
>     If a command fails with an error, please reply with the complete output
>     of the failing command. Otherwise, reboot to load the module into the
>     kernel. If the tablet does not work, please reply with the attached
>     output of `uname -a`, `lsusb`, `dmesg`, and
>     '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>     exist). Any additional information that you can provide (such as the
>     tablet, distribution, etc. would also be valuable in helping our
>     developers replicate the issue).
>
>     This code has been tested locally and seems to work well, but there's
>     always the chance that it has trouble with a particular distribution.
>
>     [1]:
>     https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>
>     Jason
>     ---
>     Now instead of four in the eights place /
>     you’ve got three, ‘Cause you added one /
>     (That is to say, eight) to the two, /
>     But you can’t take seven from three, /
>     So you look at the sixty-fours....
>
>


--
Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
In reply to this post by Marcus Gisslén
Marcus,

I've just tested a 056a:033c like yours locally on Ubuntu 15.04 with the
3.19.0-30-generic kernel and it seems to work fine (aside from the
compile error that you and others have run into). I wonder if the
compiled driver was not installed correctly... Could you please run the
following commands and provide me with their output?

$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
$ ls -l /lib/modules/$(uname -r)/extra/wacom*
$ grep wacom /lib/modules/$(uname -r)/modules.dep

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 10/6/2015 1:55 AM, Marcus Gisslén wrote:

> I tired Jean-Maries fix and it compiled without errors but it could not
> recognize my Intuos.
>
> A part of dmesg:
> [   72.237808] usb 2-1.1: new full-speed USB device number 4 using ehci-pci
> [   72.335131] usb 2-1.1: New USB device found, idVendor=056a,
> idProduct=033c
> [   72.335138] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [   72.335142] usb 2-1.1: Product: Intuos PTS
> [   72.335146] usb 2-1.1: Manufacturer: Wacom Co.,Ltd.
> [   72.340000] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:056A:033C.0004/input/input21
> [   72.340193] wacom 0003:056A:033C.0004: hidraw0: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input0
> [   72.341717] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:056A:033C.0005/input/input23
> [   72.341954] wacom 0003:056A:033C.0005: hidraw1: USB HID v1.10 Device
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input1
> [   72.343590] input: Wacom HID Pen as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:056A:033C.0006/input/input25
> [   72.343771] wacom 0003:056A:033C.0006: hidraw2: USB HID v1.10 Mouse
> [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:1d.0-1.1/input2
> [   82.824829] usb 2-1.1: USB disconnect, device number 4
>
>
> tis 6 okt. 2015 kl 10:36 skrev Jean-Marie Gouarné
> <[hidden email] <mailto:[hidden email]>>:
>
>     Hi Jason,
>
>     I got a compile failure on Ubuntu 14.04.3 with kernel 3.19.0-30-generic.
>
>     The issue comes from a "wrong type argument" in 3.17/wacom_wac.c
>     line 701.
>
>     If I replace "!wacom->battery" by "!wacom->battery.dev" in line 701, it
>     compiles fine.
>
>     However I don't have any of the newly supported Wacom devices at hand,
>     so I can't check the features.
>
>     I reproduce the full make report below (with wacom_wac.c "as is" in the
>     distribution).
>
>     Many thanks for the job !
>
>     --
>
>     make  all-recursive
>     make[1]: Entering directory
>     `/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
>     Making all in 3.17
>     make[2]: Entering directory
>     `/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
>          Building input-wacom drivers for 2.6 kernel.
>     make -C /lib/modules/3.19.0-30-generic/build
>     M=/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17
>     make[3]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
>        LD
>     /tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/built-in.o
>        CC [M]
>     /tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o
>     /tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:
>     In function ‘wacom_remote_irq’:
>     /tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:701:6:
>     error: wrong type argument to unary exclamation mark
>        if (!wacom->battery &&
>            ^
>     make[4]: ***
>     [/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o]
>     Error 1
>     make[3]: ***
>     [_module_/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17]
>     Error 2
>     make[3]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
>     make[2]: *** [all] Error 2
>     make[2]: Leaving directory
>     `/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
>     make[1]: *** [all-recursive] Error 1
>     make[1]: Leaving directory
>     `/tmp/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
>     make: *** [all] Error 2
>
>
>     Le 05/10/2015 23:37, Jason Gerecke a écrit :
>     > I'm pleased to announce that a pre-release version of our
>     "input-wacom"
>     > driver which includes support for Wacom's newest line of Intuos
>     tablets
>     > is now available for testing. If you're comfortable with compiling and
>     > installing pre-release kernel code and have one of these new tablets,
>     > please continue reading. A final release which supports a wider
>     variety
>     > of Linux distributions is expected in a few/several weeks.
>     >
>     > ~~~~~~~~~~~~~~~~
>     >
>     > Before continuing, please ensure you are using Linux 3.17 or newer
>     > (`uname -r`). This pre-release version is not compatible with older
>     > kernels at this time. Also ensure that you are using one of the
>     devices
>     > listed below (`lsusb`) which require the use of this version:
>     >
>     > 056a:033b
>     > 056a:033c
>     > 056a:033d
>     > 056a:033e
>     >
>     > Prior to compiling the driver, you will need to make sure that the
>     > necessary development headers are installed. If you are running a
>     > Debian-based distribution such as Ubuntu or Mint, run:
>     >
>     >     $ sudo apt-get install linux-headers-$(uname -r)
>     >
>     > Users of Red Hat-based distributions like Fedora or CentOS should
>     > instead run the following:
>     >
>     >     $ sudo yum install gcc kernel-devel
>     >
>     >
>     > Once the headers have been installed, download a copy of the
>     pre-release
>     > driver code from [1]. Extract the archive's contents, navigate to the
>     > directory in a terminal, and run the following sequence of commands:
>     >
>     > $ ./autogen.sh
>     > $ make
>     > $ sudo make install
>     > $ sudo depmod -a
>     >
>     > If a command fails with an error, please reply with the complete
>     output
>     > of the failing command. Otherwise, reboot to load the module into the
>     > kernel. If the tablet does not work, please reply with the attached
>     > output of `uname -a`, `lsusb`, `dmesg`, and
>     > '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>     > exist). Any additional information that you can provide (such as the
>     > tablet, distribution, etc. would also be valuable in helping our
>     > developers replicate the issue).
>     >
>     > This code has been tested locally and seems to work well, but there's
>     > always the chance that it has trouble with a particular distribution.
>     >
>     > [1]:
>     >
>     https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>     >
>     > Jason
>     > ---
>     > Now instead of four in the eights place /
>     > you’ve got three, ‘Cause you added one /
>     > (That is to say, eight) to the two, /
>     > But you can’t take seven from three, /
>     > So you look at the sixty-fours....
>
>
>     ------------------------------------------------------------------------------
>     _______________________________________________
>     Linuxwacom-discuss mailing list
>     [hidden email]
>     <mailto:[hidden email]>
>     https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>

------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
In reply to this post by Jason Gerecke
Riccardo,

This issue is due to a change in the kernel's power supply interface
that occurred around Linux 4.1. As mentioned by Jean-Marie in another
thread, if you replace "!wacom->battery" with "!wacom->battery.dev" on
line 701, the compile should continue. We should have this issue fixed
in the next few days.

Let us know if the rest of the process goes smoothly or not :)

[Re-adding linuxwacom-discuss: please use Reply to All in the future...]

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 10/7/2015 12:14 AM, Riccardo Antonelli wrote:

> Hi Jason. I'm having problem with the compilation itself.
>
> I'm running Debian with kernel 3.18.0-031800-generic. I run
>
> $ ./autogen.sh
>
> with no errors. Then upon doing make:
>
> $ make -j8
> make  all-recursive
> make[1]: Entering directory
> '/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
>
> Making all in 3.17
> make[2]: Entering directory
> '/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
>
>     Building input-wacom drivers for 2.6 kernel.
> make -C /lib/modules/3.18.0-031800-generic/build
> M=/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17
>
> make[3]: Entering directory '/usr/src/linux-headers-3.18.0-031800-generic'
>   CC [M]
> /home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o
>
>   CC [M]
> /home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_sys.o
>
>   CC [M]
> /home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.o
>
> /home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:
> In function 'wacom_remote_irq':
> /home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.c:701:6:
> error: wrong type argument to unary exclamation mark
>   if (!wacom->battery &&
>       ^
> scripts/Makefile.build:257: recipe for target
> '/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o'
> failed
> make[4]: ***
> [/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_wac.o]
> Error 1
> make[4]: *** Waiting for unfinished jobs....
> Makefile:1381: recipe for target
> '_module_/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
> failed
> make[3]: ***
> [_module_/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17]
> Error 2
> make[3]: Leaving directory '/usr/src/linux-headers-3.18.0-031800-generic'
> Makefile:22: recipe for target 'all' failed
> make[2]: *** [all] Error 2
> make[2]: Leaving directory
> '/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
>
> Makefile:360: recipe for target 'all-recursive' failed
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory
> '/home/riccardo/prog/linuxwacom-testing/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
>
> Makefile:290: recipe for target 'all' failed
> make: *** [all] Error 2
>
> I have built stable versions of linux-wacom before with no such error.
>
> Riccardo
>
> On 10/05/15 23:37, Jason Gerecke wrote:
>> I'm pleased to announce that a pre-release version of our "input-wacom"
>> driver which includes support for Wacom's newest line of Intuos tablets
>> is now available for testing. If you're comfortable with compiling and
>> installing pre-release kernel code and have one of these new tablets,
>> please continue reading. A final release which supports a wider variety
>> of Linux distributions is expected in a few/several weeks.
>>
>> ~~~~~~~~~~~~~~~~
>>
>> Before continuing, please ensure you are using Linux 3.17 or newer
>> (`uname -r`). This pre-release version is not compatible with older
>> kernels at this time. Also ensure that you are using one of the devices
>> listed below (`lsusb`) which require the use of this version:
>>
>> 056a:033b
>> 056a:033c
>> 056a:033d
>> 056a:033e
>>
>> Prior to compiling the driver, you will need to make sure that the
>> necessary development headers are installed. If you are running a
>> Debian-based distribution such as Ubuntu or Mint, run:
>>
>>     $ sudo apt-get install linux-headers-$(uname -r)
>>
>> Users of Red Hat-based distributions like Fedora or CentOS should
>> instead run the following:
>>
>>     $ sudo yum install gcc kernel-devel
>>
>>
>> Once the headers have been installed, download a copy of the pre-release
>> driver code from [1]. Extract the archive's contents, navigate to the
>> directory in a terminal, and run the following sequence of commands:
>>
>> $ ./autogen.sh
>> $ make
>> $ sudo make install
>> $ sudo depmod -a
>>
>> If a command fails with an error, please reply with the complete output
>> of the failing command. Otherwise, reboot to load the module into the
>> kernel. If the tablet does not work, please reply with the attached
>> output of `uname -a`, `lsusb`, `dmesg`, and
>> '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>> exist). Any additional information that you can provide (such as the
>> tablet, distribution, etc. would also be valuable in helping our
>> developers replicate the issue).
>>
>> This code has been tested locally and seems to work well, but there's
>> always the chance that it has trouble with a particular distribution.
>>
>> [1]:
>> https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>>
>>
>> Jason
>> ---
>> Now instead of four in the eights place /
>> you’ve got three, ‘Cause you added one /
>> (That is to say, eight) to the two, /
>> But you can’t take seven from three, /
>> So you look at the sixty-fours....
>>
>>
>

------------------------------------------------------------------------------
Full-scale, agent-less Infrastructure Monitoring from a single dashboard
Integrate with 40+ ManageEngine ITSM Solutions for complete visibility
Physical-Virtual-Cloud Infrastructure monitoring from one console
Real user monitoring with APM Insights and performance trend reports
Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Marcus Gisslén
In reply to this post by Ping Cheng-2
Jason
Sending again because I think the former mail just went to Ping
My bad


$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124548 okt  3 02:04 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko


$ ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144832 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14712 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko

$ grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko


For me it seams correct. Wonder why it doesn't show up on the Wacom-setup or doesn't respond on touch? 

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Bruno Keymolen
Oops, my prev mail went to Jason only, sorry for that.

I have the same issue as Marcus and just noticed I got a 'Can't read private key' during the installation process.
As a workaround; loading the module manually works!   (Linux Mint 17.2 - Xfce, 3,19 kernel)

sudo rmmod wacom.ko 
sudo insmod 3.17/wacom.ko 


Manual loading:

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo rmmod wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo insmod 3.17/wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ xsetwacom --list devices
Wacom Intuos PT S 2 Pen stylus   id: 11 type: STYLUS    
Wacom Intuos PT S 2 Finger touch id: 12 type: TOUCH     
Wacom Intuos PT S 2 Pad pad     id: 13 type: PAD       
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ uname -a
Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

The 'Can't read private key'  :

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo make install
[sudo] password for bruno: 
Making install in 3.17
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make -C /lib/modules/3.19.0-30-generic/build M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17 modules_install
make[2]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom.ko
Can't read private key
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.ko
Can't read private key
  DEPMOD  3.19.0-30-generic
make[2]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/sbin" depmod -a 3.19.0-30-generic
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'


Thanks,

Bruno




On Thu, Oct 8, 2015 at 5:36 AM, Marcus Gisslén <[hidden email]> wrote:
Jason
Sending again because I think the former mail just went to Ping
My bad


$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124548 okt  3 02:04 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko


$ ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144832 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14712 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko

$ grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko


For me it seams correct. Wonder why it doesn't show up on the Wacom-setup or doesn't respond on touch? 

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss



------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Marcus Gisslén
Ping
I think I have a real problem.

sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko
insmod: ERROR: could not insert module /lib/modules/3.19.0-30-generic/extra/wacom.ko: Unknown symbol in module

tors 8 okt. 2015 kl 06:56 skrev Bruno Keymolen <[hidden email]>:
Oops, my prev mail went to Jason only, sorry for that.

I have the same issue as Marcus and just noticed I got a 'Can't read private key' during the installation process.
As a workaround; loading the module manually works!   (Linux Mint 17.2 - Xfce, 3,19 kernel)

sudo rmmod wacom.ko 
sudo insmod 3.17/wacom.ko 


Manual loading:

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo rmmod wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo insmod 3.17/wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ xsetwacom --list devices
Wacom Intuos PT S 2 Pen stylus   id: 11 type: STYLUS    
Wacom Intuos PT S 2 Finger touch id: 12 type: TOUCH     
Wacom Intuos PT S 2 Pad pad     id: 13 type: PAD       
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ uname -a
Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

The 'Can't read private key'  :

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo make install
[sudo] password for bruno: 
Making install in 3.17
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make -C /lib/modules/3.19.0-30-generic/build M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17 modules_install
make[2]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom.ko
Can't read private key
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.ko
Can't read private key
  DEPMOD  3.19.0-30-generic
make[2]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/sbin" depmod -a 3.19.0-30-generic
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'


Thanks,

Bruno




On Thu, Oct 8, 2015 at 5:36 AM, Marcus Gisslén <[hidden email]> wrote:
Jason
Sending again because I think the former mail just went to Ping
My bad


$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124548 okt  3 02:04 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko


$ ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144832 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14712 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko

$ grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko


For me it seams correct. Wonder why it doesn't show up on the Wacom-setup or doesn't respond on touch? 

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Marcus Gisslén
Progress. After I reboot I could load the driver and it works as touchpad :)

But, it doesn't show up in the wacom-settings

tors 8 okt. 2015 kl 08:44 skrev Marcus Gisslén <[hidden email]>:
Ping
I think I have a real problem.

sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko
insmod: ERROR: could not insert module /lib/modules/3.19.0-30-generic/extra/wacom.ko: Unknown symbol in module

tors 8 okt. 2015 kl 06:56 skrev Bruno Keymolen <[hidden email]>:
Oops, my prev mail went to Jason only, sorry for that.

I have the same issue as Marcus and just noticed I got a 'Can't read private key' during the installation process.
As a workaround; loading the module manually works!   (Linux Mint 17.2 - Xfce, 3,19 kernel)

sudo rmmod wacom.ko 
sudo insmod 3.17/wacom.ko 


Manual loading:

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo rmmod wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo insmod 3.17/wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ xsetwacom --list devices
Wacom Intuos PT S 2 Pen stylus   id: 11 type: STYLUS    
Wacom Intuos PT S 2 Finger touch id: 12 type: TOUCH     
Wacom Intuos PT S 2 Pad pad     id: 13 type: PAD       
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ uname -a
Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

The 'Can't read private key'  :

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo make install
[sudo] password for bruno: 
Making install in 3.17
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make -C /lib/modules/3.19.0-30-generic/build M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17 modules_install
make[2]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom.ko
Can't read private key
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.ko
Can't read private key
  DEPMOD  3.19.0-30-generic
make[2]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/sbin" depmod -a 3.19.0-30-generic
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'


Thanks,

Bruno




On Thu, Oct 8, 2015 at 5:36 AM, Marcus Gisslén <[hidden email]> wrote:
Jason
Sending again because I think the former mail just went to Ping
My bad


$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124548 okt  3 02:04 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko


$ ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144832 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14712 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko

$ grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko


For me it seams correct. Wonder why it doesn't show up on the Wacom-setup or doesn't respond on touch? 

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Marcus Gisslén
WOW IT'S WORKING :D

You people are my heroes and I will tell my daughter about you :D
It still doesn't show up in the settings and I can't paint in myPaint but it works in gimp so I think it's just some settings to be done 

Thank you so much :)

tors 8 okt. 2015 kl 09:03 skrev Marcus Gisslén <[hidden email]>:
Progress. After I reboot I could load the driver and it works as touchpad :)

But, it doesn't show up in the wacom-settings

tors 8 okt. 2015 kl 08:44 skrev Marcus Gisslén <[hidden email]>:
Ping
I think I have a real problem.

sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko
insmod: ERROR: could not insert module /lib/modules/3.19.0-30-generic/extra/wacom.ko: Unknown symbol in module

tors 8 okt. 2015 kl 06:56 skrev Bruno Keymolen <[hidden email]>:
Oops, my prev mail went to Jason only, sorry for that.

I have the same issue as Marcus and just noticed I got a 'Can't read private key' during the installation process.
As a workaround; loading the module manually works!   (Linux Mint 17.2 - Xfce, 3,19 kernel)

sudo rmmod wacom.ko 
sudo insmod 3.17/wacom.ko 


Manual loading:

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo rmmod wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo insmod 3.17/wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ xsetwacom --list devices
Wacom Intuos PT S 2 Pen stylus   id: 11 type: STYLUS    
Wacom Intuos PT S 2 Finger touch id: 12 type: TOUCH     
Wacom Intuos PT S 2 Pad pad     id: 13 type: PAD       
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ uname -a
Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

The 'Can't read private key'  :

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo make install
[sudo] password for bruno: 
Making install in 3.17
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make -C /lib/modules/3.19.0-30-generic/build M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17 modules_install
make[2]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom.ko
Can't read private key
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.ko
Can't read private key
  DEPMOD  3.19.0-30-generic
make[2]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/sbin" depmod -a 3.19.0-30-generic
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'


Thanks,

Bruno




On Thu, Oct 8, 2015 at 5:36 AM, Marcus Gisslén <[hidden email]> wrote:
Jason
Sending again because I think the former mail just went to Ping
My bad


$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124548 okt  3 02:04 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko


$ ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144832 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14712 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko

$ grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko


For me it seams correct. Wonder why it doesn't show up on the Wacom-setup or doesn't respond on touch? 

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Philip Brown
In reply to this post by Jason Gerecke
HI Jason,
I ran "make install" and "depmod -a" but did not reboot ( what is this... windows ;-) )

From memory, (i.e. not 100% certain) looking at "make install" it looked as though it installed only in my working directory and there was no wacom.ko in /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/ afterwards. I will re-build and reboot following "depmode -a", tonight, to clear this up.

uname -a
Linux tp-fed22 4.1.8-200.fc22.x86_64 #1 SMP Tue Sep 22 12:13:21 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

So far wacom pad has been working great, thanks again.

Philip

On Thu, Oct 8, 2015 at 12:13 AM, Jason Gerecke <[hidden email]> wrote:
Thanks for the feedback, Philip.

Out of curiosity, did you try running `make install` and `depmod -a` as
outlined in the instructions? Theoretically the driver should work after
a reboot if you perform those two steps, but I've heard that it doesn't
always work for some people (and wonder if it might be the cause of some
of the issues reported by others). If you copied the modules manually
because the install/depmod/reboot steps didn't seem to make the driver
work, I'd like to know a bit more about your setup to try and understand
the failure.

Jason

On 10/6/2015 12:18 AM, Philip Brown wrote:
> I'm pleased to announce 033b compiles fine on Fedora 22 and after
> copying the wacom.ko module ala:
>
> mv /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko.xz
> /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko
> cp 3.17/wacom.ko
> /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko
>
> and a reboot she comes up fine.
>
> Awesome, Thanks so much!!!
>
>
>
>
> On Mon, Oct 5, 2015 at 11:37 PM, Jason Gerecke <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     I'm pleased to announce that a pre-release version of our "input-wacom"
>     driver which includes support for Wacom's newest line of Intuos tablets
>     is now available for testing. If you're comfortable with compiling and
>     installing pre-release kernel code and have one of these new tablets,
>     please continue reading. A final release which supports a wider variety
>     of Linux distributions is expected in a few/several weeks.
>
>     ~~~~~~~~~~~~~~~~
>
>     Before continuing, please ensure you are using Linux 3.17 or newer
>     (`uname -r`). This pre-release version is not compatible with older
>     kernels at this time. Also ensure that you are using one of the devices
>     listed below (`lsusb`) which require the use of this version:
>
>     056a:033b
>     056a:033c
>     056a:033d
>     056a:033e
>
>     Prior to compiling the driver, you will need to make sure that the
>     necessary development headers are installed. If you are running a
>     Debian-based distribution such as Ubuntu or Mint, run:
>
>        $ sudo apt-get install linux-headers-$(uname -r)
>
>     Users of Red Hat-based distributions like Fedora or CentOS should
>     instead run the following:
>
>        $ sudo yum install gcc kernel-devel
>
>
>     Once the headers have been installed, download a copy of the pre-release
>     driver code from [1]. Extract the archive's contents, navigate to the
>     directory in a terminal, and run the following sequence of commands:
>
>     $ ./autogen.sh
>     $ make
>     $ sudo make install
>     $ sudo depmod -a
>
>     If a command fails with an error, please reply with the complete output
>     of the failing command. Otherwise, reboot to load the module into the
>     kernel. If the tablet does not work, please reply with the attached
>     output of `uname -a`, `lsusb`, `dmesg`, and
>     '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it doesn't
>     exist). Any additional information that you can provide (such as the
>     tablet, distribution, etc. would also be valuable in helping our
>     developers replicate the issue).
>
>     This code has been tested locally and seems to work well, but there's
>     always the chance that it has trouble with a particular distribution.
>
>     [1]:
>     https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>
>     Jason
>     ---
>     Now instead of four in the eights place /
>     you’ve got three, ‘Cause you added one /
>     (That is to say, eight) to the two, /
>     But you can’t take seven from three, /
>     So you look at the sixty-fours....
>
>


--
Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Ping Cheng-2
In reply to this post by Marcus Gisslén
Hi Marcus,

Please say "Happy Birthday" to your daughter for me and for my team! I am sure Wacom tablet will still be with her as she grows...

Cheers,

Ping

P.S., I have a daughter who draws with Wacom tablet too ;-).

On Thu, Oct 8, 2015 at 12:18 AM, Marcus Gisslén <[hidden email]> wrote:
WOW IT'S WORKING :D

You people are my heroes and I will tell my daughter about you :D
It still doesn't show up in the settings and I can't paint in myPaint but it works in gimp so I think it's just some settings to be done 

Thank you so much :)

tors 8 okt. 2015 kl 09:03 skrev Marcus Gisslén <[hidden email]>:
Progress. After I reboot I could load the driver and it works as touchpad :)

But, it doesn't show up in the wacom-settings

tors 8 okt. 2015 kl 08:44 skrev Marcus Gisslén <[hidden email]>:
Ping
I think I have a real problem.

sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko
insmod: ERROR: could not insert module /lib/modules/3.19.0-30-generic/extra/wacom.ko: Unknown symbol in module

tors 8 okt. 2015 kl 06:56 skrev Bruno Keymolen <[hidden email]>:
Oops, my prev mail went to Jason only, sorry for that.

I have the same issue as Marcus and just noticed I got a 'Can't read private key' during the installation process.
As a workaround; loading the module manually works!   (Linux Mint 17.2 - Xfce, 3,19 kernel)

sudo rmmod wacom.ko 
sudo insmod 3.17/wacom.ko 


Manual loading:

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo rmmod wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo insmod 3.17/wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ xsetwacom --list devices
Wacom Intuos PT S 2 Pen stylus   id: 11 type: STYLUS    
Wacom Intuos PT S 2 Finger touch id: 12 type: TOUCH     
Wacom Intuos PT S 2 Pad pad     id: 13 type: PAD       
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ uname -a
Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

The 'Can't read private key'  :

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo make install
[sudo] password for bruno: 
Making install in 3.17
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make -C /lib/modules/3.19.0-30-generic/build M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17 modules_install
make[2]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom.ko
Can't read private key
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.ko
Can't read private key
  DEPMOD  3.19.0-30-generic
make[2]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/sbin" depmod -a 3.19.0-30-generic
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'


Thanks,

Bruno




On Thu, Oct 8, 2015 at 5:36 AM, Marcus Gisslén <[hidden email]> wrote:
Jason
Sending again because I think the former mail just went to Ping
My bad


$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124548 okt  3 02:04 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko


$ ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144832 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14712 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko

$ grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko


For me it seams correct. Wonder why it doesn't show up on the Wacom-setup or doesn't respond on touch? 

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss



------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Marcus Gisslén
I sure will :)
Is there a way to be able to use the pressure sensitive feature?

tors 8 okt. 2015 kl 15:59 skrev Ping Cheng <[hidden email]>:
Hi Marcus,

Please say "Happy Birthday" to your daughter for me and for my team! I am sure Wacom tablet will still be with her as she grows...

Cheers,

Ping

P.S., I have a daughter who draws with Wacom tablet too ;-).

On Thu, Oct 8, 2015 at 12:18 AM, Marcus Gisslén <[hidden email]> wrote:
WOW IT'S WORKING :D

You people are my heroes and I will tell my daughter about you :D
It still doesn't show up in the settings and I can't paint in myPaint but it works in gimp so I think it's just some settings to be done 

Thank you so much :)

tors 8 okt. 2015 kl 09:03 skrev Marcus Gisslén <[hidden email]>:
Progress. After I reboot I could load the driver and it works as touchpad :)

But, it doesn't show up in the wacom-settings

tors 8 okt. 2015 kl 08:44 skrev Marcus Gisslén <[hidden email]>:
Ping
I think I have a real problem.

sudo insmod /lib/modules/3.19.0-30-generic/extra/wacom.ko
insmod: ERROR: could not insert module /lib/modules/3.19.0-30-generic/extra/wacom.ko: Unknown symbol in module

tors 8 okt. 2015 kl 06:56 skrev Bruno Keymolen <[hidden email]>:
Oops, my prev mail went to Jason only, sorry for that.

I have the same issue as Marcus and just noticed I got a 'Can't read private key' during the installation process.
As a workaround; loading the module manually works!   (Linux Mint 17.2 - Xfce, 3,19 kernel)

sudo rmmod wacom.ko 
sudo insmod 3.17/wacom.ko 


Manual loading:

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo rmmod wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo insmod 3.17/wacom.ko 
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ xsetwacom --list devices
Wacom Intuos PT S 2 Pen stylus   id: 11 type: STYLUS    
Wacom Intuos PT S 2 Finger touch id: 12 type: TOUCH     
Wacom Intuos PT S 2 Pad pad     id: 13 type: PAD       
bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ uname -a
Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

The 'Can't read private key'  :

bruno@bruno-Dell ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2 $ sudo make install
[sudo] password for bruno: 
Making install in 3.17
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make -C /lib/modules/3.19.0-30-generic/build M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17 modules_install
make[2]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom.ko
Can't read private key
  INSTALL /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.ko
Can't read private key
  DEPMOD  3.19.0-30-generic
make[2]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/sbin" depmod -a 3.19.0-30-generic
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
make[1]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Entering directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
make[1]: Leaving directory `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'


Thanks,

Bruno




On Thu, Oct 8, 2015 at 5:36 AM, Marcus Gisslén <[hidden email]> wrote:
Jason
Sending again because I think the former mail just went to Ping
My bad


$ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
-rw-r--r-- 1 root root 124548 okt  3 02:04 /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko


$ ls -l /lib/modules/$(uname -r)/extra/wacom*
-rw-r--r-- 1 root root 144832 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom.ko
-rw-r--r-- 1 root root  14712 okt  6 10:47 /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko

$ grep wacom /lib/modules/$(uname -r)/modules.dep
kernel/drivers/input/tablet/wacom_serial4.ko:
kernel/drivers/input/touchscreen/wacom_w8001.ko:
kernel/drivers/input/touchscreen/wacom_i2c.ko:
kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko


For me it seams correct. Wonder why it doesn't show up on the Wacom-setup or doesn't respond on touch? 

------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss



------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
In reply to this post by Bruno Keymolen
Just following up in case anyone else was wondering about the "can't
read private key" message.

This is a warning letting you know that the kernel could not sign the
module since the necessary private key wasn't present. Unless you've
specifically created your own kernel signing keys this is perfectly
normal -- the key its looking for is under the control of Red Hat,
Canonical, etc. since they built the kernel originally. The kernel
(again, unless specifically configured otherwise) shouldn't have any
issue loading an unsigned module automatically or manually.

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one  /
(That is to say, eight) to the two,     /
But you can’t take seven from three,    /
So you look at the sixty-fours....


On Wed, Oct 7, 2015 at 9:56 PM, Bruno Keymolen <[hidden email]> wrote:

> Oops, my prev mail went to Jason only, sorry for that.
>
> I have the same issue as Marcus and just noticed I got a 'Can't read private
> key' during the installation process.
> As a workaround; loading the module manually works!   (Linux Mint 17.2 -
> Xfce, 3,19 kernel)
>
> sudo rmmod wacom.ko
> sudo insmod 3.17/wacom.ko
>
>
> Manual loading:
>
> bruno@bruno-Dell
> ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2
> $ sudo rmmod wacom.ko
> bruno@bruno-Dell
> ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2
> $ sudo insmod 3.17/wacom.ko
> bruno@bruno-Dell
> ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2
> $ xsetwacom --list devices
> Wacom Intuos PT S 2 Pen stylus   id: 11 type: STYLUS
> Wacom Intuos PT S 2 Finger touch id: 12 type: TOUCH
> Wacom Intuos PT S 2 Pad pad     id: 13 type: PAD
> bruno@bruno-Dell
> ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2
> $ uname -a
> Linux bruno-Dell 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39
> UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
>
> The 'Can't read private key'  :
>
> bruno@bruno-Dell
> ~/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2
> $ sudo make install
> [sudo] password for bruno:
> Making install in 3.17
> make[1]: Entering directory
> `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
> make -C /lib/modules/3.19.0-30-generic/build
> M=/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17
> modules_install
> make[2]: Entering directory `/usr/src/linux-headers-3.19.0-30-generic'
>   INSTALL
> /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom.ko
> Can't read private key
>   INSTALL
> /home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17/wacom_w8001.ko
> Can't read private key
>   DEPMOD  3.19.0-30-generic
> make[2]: Leaving directory `/usr/src/linux-headers-3.19.0-30-generic'
> PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/sbin"
> depmod -a 3.19.0-30-generic
> make[1]: Leaving directory
> `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2/3.17'
> make[1]: Entering directory
> `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
> make[2]: Entering directory
> `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
> make[2]: Nothing to be done for `install-exec-am'.
> make[2]: Nothing to be done for `install-data-am'.
> make[2]: Leaving directory
> `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
> make[1]: Leaving directory
> `/home/bruno/projects-3rd/wacom/linuxwacom-input-wacom-7666e35a7d364491db8ade7410f8b2f9b62215a2'
>
>
> Thanks,
>
> Bruno
>
>
>
>
> On Thu, Oct 8, 2015 at 5:36 AM, Marcus Gisslén <[hidden email]>
> wrote:
>>
>> Jason
>> Sending again because I think the former mail just went to Ping
>> My bad
>>>
>>>
>>>
>>> $ ls -l /lib/modules/$(uname -r)/kernel/drivers/hid/wacom*
>>> -rw-r--r-- 1 root root 124548 okt  3 02:04
>>> /lib/modules/3.19.0-30-generic/kernel/drivers/hid/wacom.ko
>>>
>>>
>>> $ ls -l /lib/modules/$(uname -r)/extra/wacom*
>>> -rw-r--r-- 1 root root 144832 okt  6 10:47
>>> /lib/modules/3.19.0-30-generic/extra/wacom.ko
>>> -rw-r--r-- 1 root root  14712 okt  6 10:47
>>> /lib/modules/3.19.0-30-generic/extra/wacom_w8001.ko
>>>
>>> $ grep wacom /lib/modules/$(uname -r)/modules.dep
>>> kernel/drivers/input/tablet/wacom_serial4.ko:
>>> kernel/drivers/input/touchscreen/wacom_w8001.ko:
>>> kernel/drivers/input/touchscreen/wacom_i2c.ko:
>>> kernel/drivers/hid/wacom.ko: kernel/drivers/hid/hid.ko
>>>
>>>
>>> For me it seams correct. Wonder why it doesn't show up on the Wacom-setup
>>> or doesn't respond on touch?
>>
>>
>>
>> ------------------------------------------------------------------------------
>>
>> _______________________________________________
>> Linuxwacom-discuss mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>>
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Linuxwacom-discuss mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
In reply to this post by Philip Brown
Philip,

The driver should be installing into the /lib/modules/$(uname
-r)/extra/ directory. This is to prevent it from overwriting the
distribution-supplied version in /lib/modules/$(uname
-r)/kernel/drivers/hid/ (since it may cause the package manager some
heartburn).

A reboot isn't technically necessary to get the driver loaded ;) If
`depmod -a` completes successfully, you should be able to run
`modprobe -r wacom && modprobe wacom` to unload the old driver and
load up the new one. However, it looks like depmod might not be
updating the kernel's dependency tree as expected, meaning the new
driver isn't actually loaded. You can force the new driver to load by
replacing the distribution-supplied version (or using `insmod
/lib/modules/$(uname -r)/extra/wacom.ko`) but I'd really like to know
why the depmod step works fine for me, but not other people... Its the
developer's curse :P

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one  /
(That is to say, eight) to the two,     /
But you can’t take seven from three,    /
So you look at the sixty-fours....


On Thu, Oct 8, 2015 at 2:11 AM, Philip Brown <[hidden email]> wrote:

> HI Jason,
> I ran "make install" and "depmod -a" but did not reboot ( what is this...
> windows ;-) )
>
> From memory, (i.e. not 100% certain) looking at "make install" it looked as
> though it installed only in my working directory and there was no wacom.ko
> in /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/ afterwards. I will
> re-build and reboot following "depmode -a", tonight, to clear this up.
>
> uname -a
> Linux tp-fed22 4.1.8-200.fc22.x86_64 #1 SMP Tue Sep 22 12:13:21 UTC 2015
> x86_64 x86_64 x86_64 GNU/Linux
>
> So far wacom pad has been working great, thanks again.
>
> Philip
>
> On Thu, Oct 8, 2015 at 12:13 AM, Jason Gerecke <[hidden email]> wrote:
>>
>> Thanks for the feedback, Philip.
>>
>> Out of curiosity, did you try running `make install` and `depmod -a` as
>> outlined in the instructions? Theoretically the driver should work after
>> a reboot if you perform those two steps, but I've heard that it doesn't
>> always work for some people (and wonder if it might be the cause of some
>> of the issues reported by others). If you copied the modules manually
>> because the install/depmod/reboot steps didn't seem to make the driver
>> work, I'd like to know a bit more about your setup to try and understand
>> the failure.
>>
>> Jason
>>
>> On 10/6/2015 12:18 AM, Philip Brown wrote:
>> > I'm pleased to announce 033b compiles fine on Fedora 22 and after
>> > copying the wacom.ko module ala:
>> >
>> > mv /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko.xz
>> > /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko
>> > cp 3.17/wacom.ko
>> > /lib/modules/4.1.8-200.fc22.x86_64/kernel/drivers/hid/wacom.ko
>> >
>> > and a reboot she comes up fine.
>> >
>> > Awesome, Thanks so much!!!
>> >
>> >
>> >
>> >
>> > On Mon, Oct 5, 2015 at 11:37 PM, Jason Gerecke <[hidden email]
>> > <mailto:[hidden email]>> wrote:
>> >
>> >     I'm pleased to announce that a pre-release version of our
>> > "input-wacom"
>> >     driver which includes support for Wacom's newest line of Intuos
>> > tablets
>> >     is now available for testing. If you're comfortable with compiling
>> > and
>> >     installing pre-release kernel code and have one of these new
>> > tablets,
>> >     please continue reading. A final release which supports a wider
>> > variety
>> >     of Linux distributions is expected in a few/several weeks.
>> >
>> >     ~~~~~~~~~~~~~~~~
>> >
>> >     Before continuing, please ensure you are using Linux 3.17 or newer
>> >     (`uname -r`). This pre-release version is not compatible with older
>> >     kernels at this time. Also ensure that you are using one of the
>> > devices
>> >     listed below (`lsusb`) which require the use of this version:
>> >
>> >     056a:033b
>> >     056a:033c
>> >     056a:033d
>> >     056a:033e
>> >
>> >     Prior to compiling the driver, you will need to make sure that the
>> >     necessary development headers are installed. If you are running a
>> >     Debian-based distribution such as Ubuntu or Mint, run:
>> >
>> >        $ sudo apt-get install linux-headers-$(uname -r)
>> >
>> >     Users of Red Hat-based distributions like Fedora or CentOS should
>> >     instead run the following:
>> >
>> >        $ sudo yum install gcc kernel-devel
>> >
>> >
>> >     Once the headers have been installed, download a copy of the
>> > pre-release
>> >     driver code from [1]. Extract the archive's contents, navigate to
>> > the
>> >     directory in a terminal, and run the following sequence of commands:
>> >
>> >     $ ./autogen.sh
>> >     $ make
>> >     $ sudo make install
>> >     $ sudo depmod -a
>> >
>> >     If a command fails with an error, please reply with the complete
>> > output
>> >     of the failing command. Otherwise, reboot to load the module into
>> > the
>> >     kernel. If the tablet does not work, please reply with the attached
>> >     output of `uname -a`, `lsusb`, `dmesg`, and
>> >     '~/.local/share/xorg/Xorg.0.log' (or /var/log/Xorg.0.log if it
>> > doesn't
>> >     exist). Any additional information that you can provide (such as the
>> >     tablet, distribution, etc. would also be valuable in helping our
>> >     developers replicate the issue).
>> >
>> >     This code has been tested locally and seems to work well, but
>> > there's
>> >     always the chance that it has trouble with a particular
>> > distribution.
>> >
>> >     [1]:
>> >
>> > https://sourceforge.net/p/linuxwacom/input-wacom/ci/jiri/for-4.4/~/tarball
>> >
>> >     Jason
>> >     ---
>> >     Now instead of four in the eights place /
>> >     you’ve got three, ‘Cause you added one /
>> >     (That is to say, eight) to the two, /
>> >     But you can’t take seven from three, /
>> >     So you look at the sixty-fours....
>> >
>> >
>>
>>
>> --
>> Jason
>> ---
>> Now instead of four in the eights place /
>> you’ve got three, ‘Cause you added one /
>> (That is to say, eight) to the two, /
>> But you can’t take seven from three, /
>> So you look at the sixty-fours....
>
>

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
In reply to this post by Jason Gerecke
Usually X works just fine once the kernel makes the device and it
shows up in xsetwacom. Go ahead and run `xsetwacom set "Wacom Intuos S
2 Pen stylus" TabletDebugLevel 10 && xsetwacom set "Wacom Intuos S 2
Pen stylus" ToolDebugLevel 10`. Make two or three strokes with the
pen, and then run `xsetwacom set "Wacom Intuos S 2 Pen stylus"
TabletDebugLevel 0 && xsetwacom set "Wacom Intuos S 2 Pen stylus"
ToolDebugLevel 0`. Attach your Xorg.0.log file afterwards and we'll
see if there's anything interesting that can explain what's happening.

As for the mailinglist issues, you're not alone :) There have been a
few people getting tripped up recently. I'm not sure what kind of
rejection messages you're seeing, but a common issue occurs when
people copy/paste large amounts of log data into their messages. The
list will reject messages with more than 40KB of body text, which
really isn't that much data. I'm pretty sure this was the issue with
your last message -- next time try attaching the logs as files rather
than copy/pasting since I don't believe the 40KB limit applies in that
case. There's also always pastebin.com if all else fails.

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one  /
(That is to say, eight) to the two,     /
But you can’t take seven from three,    /
So you look at the sixty-fours....


On Thu, Oct 8, 2015 at 6:05 AM, Riccardo Antonelli
<[hidden email]> wrote:

> ok, little update:
>
> $ xsetwacom --list devices
>
> Wacom Intuos4 6x9 stylus            id: 10    type: STYLUS
> Wacom Intuos4 6x9 Pad pad           id: 11    type: PAD
> Wacom Intuos4 6x9 eraser            id: 16    type: ERASER
> Wacom Intuos4 6x9 cursor            id: 17    type: CURSOR
>
> that's only the PTK. But if I do:
>
> $ sudo rmmod wacom.ko
> $ sudo insmod 3.17/wacom.ko
>
> then
>
> $ xsetwacom --list devices
>
> Wacom Intuos4 6x9 Pad pad           id: 10    type: PAD
> Wacom Intuos4 6x9 Pen stylus        id: 11    type: STYLUS
> Wacom Intuos4 6x9 Pen eraser        id: 16    type: ERASER
> Wacom Intuos4 6x9 Pen cursor        id: 17    type: CURSOR
> Wacom Intuos S 2 Pen stylus         id: 18    type: STYLUS
> Wacom Intuos S 2 Pad pad            id: 19    type: PAD
>
> So, by manually loading the module the tablet is recognized. However, it
> does not work (i.e., it does not move the mouse). It also does not work in
> Gimp (even though it's possible to tweak its settings in the Input
> Settings).
>
> Any ideas?
>
> Also, I am having some serious issues with the mailing list (it's my first
> time, please be gentle). All my emails are rejected; however I am subscribed
> to the list with this email ([hidden email]).
>

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
12
Loading...