Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Lokesh Jetty
Hi

I am getting the following error when i run autogen.sh. I am running
Fedora 22. I installed gcc, kernel-devel as mentioned in the post.

./autogen.sh
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal
aclocal: warning: couldn't open directory 'm4': No such file or directory
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf
autoreconf: running: /usr/bin/autoheader
autoreconf: running: automake --add-missing --copy --no-force
configure.ac:11: installing './compile'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
Makefile.am: installing './INSTALL'
autoreconf: Leaving directory `.'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking for kernel type... Linux
checking for linux-based kernel... yes
checking kernel version... 4.0.4-301.fc22.x86_64
checking for kernel source/headers... not found
configure: Unable to find build config in any of:
      [/lib/modules/4.0.4-301.fc22.x86_64/source],
      [/lib/modules/4.0.4-301.fc22.x86_64/build],
      [/usr/src/linux],
      [/usr/src/linux-4.0.4-301.fc22.x86_64],
      [/usr/src/linux-2.6]

configure: error: We could not find the development environment to
build modules for the '4.0.4-301.fc22.x86_64' kernel. Please install
the kernel source or the kernel development package and try again.


Regards,

Lokesh Jetty

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
On 11/10/2015 9:50 AM, Lokesh Jetty wrote:

> Hi
>
> I am getting the following error when i run autogen.sh. I am running
> Fedora 22. I installed gcc, kernel-devel as mentioned in the post.
>
> ./autogen.sh
> autoreconf: Entering directory `.'
> autoreconf: configure.ac: not using Gettext
> autoreconf: running: aclocal
> aclocal: warning: couldn't open directory 'm4': No such file or directory
> autoreconf: configure.ac: tracing
> autoreconf: configure.ac: not using Libtool
> autoreconf: running: /usr/bin/autoconf
> autoreconf: running: /usr/bin/autoheader
> autoreconf: running: automake --add-missing --copy --no-force
> configure.ac:11: installing './compile'
> configure.ac:8: installing './install-sh'
> configure.ac:8: installing './missing'
> Makefile.am: installing './INSTALL'
> autoreconf: Leaving directory `.'
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking whether make supports nested variables... yes
> checking whether to enable maintainer-specific portions of Makefiles... yes
> checking for gcc... gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking whether gcc understands -c and -o together... yes
> checking for style of include used by make... GNU
> checking dependency style of gcc... none
> checking for kernel type... Linux
> checking for linux-based kernel... yes
> checking kernel version... 4.0.4-301.fc22.x86_64
> checking for kernel source/headers... not found
> configure: Unable to find build config in any of:
>       [/lib/modules/4.0.4-301.fc22.x86_64/source],
>       [/lib/modules/4.0.4-301.fc22.x86_64/build],
>       [/usr/src/linux],
>       [/usr/src/linux-4.0.4-301.fc22.x86_64],
>       [/usr/src/linux-2.6]
>
> configure: error: We could not find the development environment to
> build modules for the '4.0.4-301.fc22.x86_64' kernel. Please install
> the kernel source or the kernel development package and try again.
>
>
> Regards,
>
> Lokesh Jetty
>

Lokesh,

Could you please provide the output from `yum list kernel-devel` and `ls
/lib/modules`? Its possible that a version that doesn't correspond to
your running kernel was installed.

Also, you should know that input-wacom-0.30.0 was released several days
ago and contains support for these tablets (along with a few other
fixes). If you aren't already, I would suggest downloading the 0.30.0
tarball from Sourceforge :)

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Lokesh Jetty
Thanks Jason

You are right about kernel versions. I had figured it out and
installed the correct version of kernel devel and proceeded with the
steps. However, the system hangs as soon as I try to use the tablet.

I will try installing the input-wacom-0.30.0 as you suggest. Will I
have to uninstall the driver that i installed earlier?
Regards,

Lokesh Jetty


On Wed, Nov 11, 2015 at 4:51 AM, Jason Gerecke <[hidden email]> wrote:

> On 11/10/2015 9:50 AM, Lokesh Jetty wrote:
>> Hi
>>
>> I am getting the following error when i run autogen.sh. I am running
>> Fedora 22. I installed gcc, kernel-devel as mentioned in the post.
>>
>> ./autogen.sh
>> autoreconf: Entering directory `.'
>> autoreconf: configure.ac: not using Gettext
>> autoreconf: running: aclocal
>> aclocal: warning: couldn't open directory 'm4': No such file or directory
>> autoreconf: configure.ac: tracing
>> autoreconf: configure.ac: not using Libtool
>> autoreconf: running: /usr/bin/autoconf
>> autoreconf: running: /usr/bin/autoheader
>> autoreconf: running: automake --add-missing --copy --no-force
>> configure.ac:11: installing './compile'
>> configure.ac:8: installing './install-sh'
>> configure.ac:8: installing './missing'
>> Makefile.am: installing './INSTALL'
>> autoreconf: Leaving directory `.'
>> checking for a BSD-compatible install... /usr/bin/install -c
>> checking whether build environment is sane... yes
>> checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
>> checking for gawk... gawk
>> checking whether make sets $(MAKE)... yes
>> checking whether make supports nested variables... yes
>> checking whether to enable maintainer-specific portions of Makefiles... yes
>> checking for gcc... gcc
>> checking whether the C compiler works... yes
>> checking for C compiler default output file name... a.out
>> checking for suffix of executables...
>> checking whether we are cross compiling... no
>> checking for suffix of object files... o
>> checking whether we are using the GNU C compiler... yes
>> checking whether gcc accepts -g... yes
>> checking for gcc option to accept ISO C89... none needed
>> checking whether gcc understands -c and -o together... yes
>> checking for style of include used by make... GNU
>> checking dependency style of gcc... none
>> checking for kernel type... Linux
>> checking for linux-based kernel... yes
>> checking kernel version... 4.0.4-301.fc22.x86_64
>> checking for kernel source/headers... not found
>> configure: Unable to find build config in any of:
>>       [/lib/modules/4.0.4-301.fc22.x86_64/source],
>>       [/lib/modules/4.0.4-301.fc22.x86_64/build],
>>       [/usr/src/linux],
>>       [/usr/src/linux-4.0.4-301.fc22.x86_64],
>>       [/usr/src/linux-2.6]
>>
>> configure: error: We could not find the development environment to
>> build modules for the '4.0.4-301.fc22.x86_64' kernel. Please install
>> the kernel source or the kernel development package and try again.
>>
>>
>> Regards,
>>
>> Lokesh Jetty
>>
>
> Lokesh,
>
> Could you please provide the output from `yum list kernel-devel` and `ls
> /lib/modules`? Its possible that a version that doesn't correspond to
> your running kernel was installed.
>
> Also, you should know that input-wacom-0.30.0 was released several days
> ago and contains support for these tablets (along with a few other
> fixes). If you aren't already, I would suggest downloading the 0.30.0
> tarball from Sourceforge :)
>
> Jason
> ---
> Now instead of four in the eights place /
> you’ve got three, ‘Cause you added one /
> (That is to say, eight) to the two, /
> But you can’t take seven from three, /
> So you look at the sixty-fours....

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Jason Gerecke
Lokesh,

The 0.30.0 driver should install over top of the existing driver. Keep
me updated if you have problems.

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 11/10/2015 8:12 PM, Lokesh Jetty wrote:

> Thanks Jason
>
> You are right about kernel versions. I had figured it out and
> installed the correct version of kernel devel and proceeded with the
> steps. However, the system hangs as soon as I try to use the tablet.
>
> I will try installing the input-wacom-0.30.0 as you suggest. Will I
> have to uninstall the driver that i installed earlier?
> Regards,
>
> Lokesh Jetty
>
>
> On Wed, Nov 11, 2015 at 4:51 AM, Jason Gerecke <[hidden email]> wrote:
>> On 11/10/2015 9:50 AM, Lokesh Jetty wrote:
>>> Hi
>>>
>>> I am getting the following error when i run autogen.sh. I am running
>>> Fedora 22. I installed gcc, kernel-devel as mentioned in the post.
>>>
>>> ./autogen.sh
>>> autoreconf: Entering directory `.'
>>> autoreconf: configure.ac: not using Gettext
>>> autoreconf: running: aclocal
>>> aclocal: warning: couldn't open directory 'm4': No such file or directory
>>> autoreconf: configure.ac: tracing
>>> autoreconf: configure.ac: not using Libtool
>>> autoreconf: running: /usr/bin/autoconf
>>> autoreconf: running: /usr/bin/autoheader
>>> autoreconf: running: automake --add-missing --copy --no-force
>>> configure.ac:11: installing './compile'
>>> configure.ac:8: installing './install-sh'
>>> configure.ac:8: installing './missing'
>>> Makefile.am: installing './INSTALL'
>>> autoreconf: Leaving directory `.'
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether build environment is sane... yes
>>> checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
>>> checking for gawk... gawk
>>> checking whether make sets $(MAKE)... yes
>>> checking whether make supports nested variables... yes
>>> checking whether to enable maintainer-specific portions of Makefiles... yes
>>> checking for gcc... gcc
>>> checking whether the C compiler works... yes
>>> checking for C compiler default output file name... a.out
>>> checking for suffix of executables...
>>> checking whether we are cross compiling... no
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ISO C89... none needed
>>> checking whether gcc understands -c and -o together... yes
>>> checking for style of include used by make... GNU
>>> checking dependency style of gcc... none
>>> checking for kernel type... Linux
>>> checking for linux-based kernel... yes
>>> checking kernel version... 4.0.4-301.fc22.x86_64
>>> checking for kernel source/headers... not found
>>> configure: Unable to find build config in any of:
>>>       [/lib/modules/4.0.4-301.fc22.x86_64/source],
>>>       [/lib/modules/4.0.4-301.fc22.x86_64/build],
>>>       [/usr/src/linux],
>>>       [/usr/src/linux-4.0.4-301.fc22.x86_64],
>>>       [/usr/src/linux-2.6]
>>>
>>> configure: error: We could not find the development environment to
>>> build modules for the '4.0.4-301.fc22.x86_64' kernel. Please install
>>> the kernel source or the kernel development package and try again.
>>>
>>>
>>> Regards,
>>>
>>> Lokesh Jetty
>>>
>>
>> Lokesh,
>>
>> Could you please provide the output from `yum list kernel-devel` and `ls
>> /lib/modules`? Its possible that a version that doesn't correspond to
>> your running kernel was installed.
>>
>> Also, you should know that input-wacom-0.30.0 was released several days
>> ago and contains support for these tablets (along with a few other
>> fixes). If you aren't already, I would suggest downloading the 0.30.0
>> tarball from Sourceforge :)
>>
>> Jason
>> ---
>> Now instead of four in the eights place /
>> you’ve got three, ‘Cause you added one /
>> (That is to say, eight) to the two, /
>> But you can’t take seven from three, /
>> So you look at the sixty-fours....

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Lokesh Jetty
Hi Jason

I had installed input-wacom-0.30.0 on my Arch Linux system two weeks back and it was working perfectly at the time. However, when i tried using the tablet yesterday, it was not working. If i perform any action with the pen, the entire system hangs up. I tried installing 0.30.1 also but it didn't make any difference. can that be caused if my kernel was updated during this period or could it be some other issue?

Regards,

Lokesh Jetty

On Fri, Nov 13, 2015 at 4:56 AM, Jason Gerecke <[hidden email]> wrote:
Lokesh,

The 0.30.0 driver should install over top of the existing driver. Keep
me updated if you have problems.

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....

On 11/10/2015 8:12 PM, Lokesh Jetty wrote:
> Thanks Jason
>
> You are right about kernel versions. I had figured it out and
> installed the correct version of kernel devel and proceeded with the
> steps. However, the system hangs as soon as I try to use the tablet.
>
> I will try installing the input-wacom-0.30.0 as you suggest. Will I
> have to uninstall the driver that i installed earlier?
> Regards,
>
> Lokesh Jetty
>
>
> On Wed, Nov 11, 2015 at 4:51 AM, Jason Gerecke <[hidden email]> wrote:
>> On 11/10/2015 9:50 AM, Lokesh Jetty wrote:
>>> Hi
>>>
>>> I am getting the following error when i run autogen.sh. I am running
>>> Fedora 22. I installed gcc, kernel-devel as mentioned in the post.
>>>
>>> ./autogen.sh
>>> autoreconf: Entering directory `.'
>>> autoreconf: configure.ac: not using Gettext
>>> autoreconf: running: aclocal
>>> aclocal: warning: couldn't open directory 'm4': No such file or directory
>>> autoreconf: configure.ac: tracing
>>> autoreconf: configure.ac: not using Libtool
>>> autoreconf: running: /usr/bin/autoconf
>>> autoreconf: running: /usr/bin/autoheader
>>> autoreconf: running: automake --add-missing --copy --no-force
>>> configure.ac:11: installing './compile'
>>> configure.ac:8: installing './install-sh'
>>> configure.ac:8: installing './missing'
>>> Makefile.am: installing './INSTALL'
>>> autoreconf: Leaving directory `.'
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether build environment is sane... yes
>>> checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
>>> checking for gawk... gawk
>>> checking whether make sets $(MAKE)... yes
>>> checking whether make supports nested variables... yes
>>> checking whether to enable maintainer-specific portions of Makefiles... yes
>>> checking for gcc... gcc
>>> checking whether the C compiler works... yes
>>> checking for C compiler default output file name... a.out
>>> checking for suffix of executables...
>>> checking whether we are cross compiling... no
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ISO C89... none needed
>>> checking whether gcc understands -c and -o together... yes
>>> checking for style of include used by make... GNU
>>> checking dependency style of gcc... none
>>> checking for kernel type... Linux
>>> checking for linux-based kernel... yes
>>> checking kernel version... 4.0.4-301.fc22.x86_64
>>> checking for kernel source/headers... not found
>>> configure: Unable to find build config in any of:
>>>       [/lib/modules/4.0.4-301.fc22.x86_64/source],
>>>       [/lib/modules/4.0.4-301.fc22.x86_64/build],
>>>       [/usr/src/linux],
>>>       [/usr/src/linux-4.0.4-301.fc22.x86_64],
>>>       [/usr/src/linux-2.6]
>>>
>>> configure: error: We could not find the development environment to
>>> build modules for the '4.0.4-301.fc22.x86_64' kernel. Please install
>>> the kernel source or the kernel development package and try again.
>>>
>>>
>>> Regards,
>>>
>>> Lokesh Jetty
>>>
>>
>> Lokesh,
>>
>> Could you please provide the output from `yum list kernel-devel` and `ls
>> /lib/modules`? Its possible that a version that doesn't correspond to
>> your running kernel was installed.
>>
>> Also, you should know that input-wacom-0.30.0 was released several days
>> ago and contains support for these tablets (along with a few other
>> fixes). If you aren't already, I would suggest downloading the 0.30.0
>> tarball from Sourceforge :)
>>
>> Jason
>> ---
>> Now instead of four in the eights place /
>> you’ve got three, ‘Cause you added one /
>> (That is to say, eight) to the two, /
>> But you can’t take seven from three, /
>> So you look at the sixty-fours....


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Ioan-Adrian
Hello

That is a known kernel issue right now, and there is a proposed fix for it [1].

Can you apply the patch in that message to your kernel and test?

[1] https://lkml.org/lkml/2015/11/20/690


On Sun, 29 Nov 2015 13:37:42 +0530
Lokesh Jetty <[hidden email]> wrote:

> Hi Jason
>
> I had installed input-wacom-0.30.0 on my Arch Linux system two weeks back
> and it was working perfectly at the time. However, when i tried using the
> tablet yesterday, it was not working. If i perform any action with the pen,
> the entire system hangs up. I tried installing 0.30.1 also but it didn't
> make any difference. can that be caused if my kernel was updated during
> this period or could it be some other issue?
>
> Regards,
>
> Lokesh Jetty
>
> On Fri, Nov 13, 2015 at 4:56 AM, Jason Gerecke <[hidden email]> wrote:
>
> > Lokesh,
> >
> > The 0.30.0 driver should install over top of the existing driver. Keep
> > me updated if you have problems.
> >
> > Jason
> > ---
> > Now instead of four in the eights place /
> > you’ve got three, ‘Cause you added one /
> > (That is to say, eight) to the two, /
> > But you can’t take seven from three, /
> > So you look at the sixty-fours....
> >
> > On 11/10/2015 8:12 PM, Lokesh Jetty wrote:  
> > > Thanks Jason
> > >
> > > You are right about kernel versions. I had figured it out and
> > > installed the correct version of kernel devel and proceeded with the
> > > steps. However, the system hangs as soon as I try to use the tablet.
> > >
> > > I will try installing the input-wacom-0.30.0 as you suggest. Will I
> > > have to uninstall the driver that i installed earlier?
> > > Regards,
> > >
> > > Lokesh Jetty
> > >
> > >
> > > On Wed, Nov 11, 2015 at 4:51 AM, Jason Gerecke <[hidden email]>  
> > wrote:  
> > >> On 11/10/2015 9:50 AM, Lokesh Jetty wrote:  
> > >>> Hi
> > >>>
> > >>> I am getting the following error when i run autogen.sh. I am running
> > >>> Fedora 22. I installed gcc, kernel-devel as mentioned in the post.
> > >>>
> > >>> ./autogen.sh
> > >>> autoreconf: Entering directory `.'
> > >>> autoreconf: configure.ac: not using Gettext
> > >>> autoreconf: running: aclocal
> > >>> aclocal: warning: couldn't open directory 'm4': No such file or  
> > directory  
> > >>> autoreconf: configure.ac: tracing
> > >>> autoreconf: configure.ac: not using Libtool
> > >>> autoreconf: running: /usr/bin/autoconf
> > >>> autoreconf: running: /usr/bin/autoheader
> > >>> autoreconf: running: automake --add-missing --copy --no-force
> > >>> configure.ac:11: installing './compile'
> > >>> configure.ac:8: installing './install-sh'
> > >>> configure.ac:8: installing './missing'
> > >>> Makefile.am: installing './INSTALL'
> > >>> autoreconf: Leaving directory `.'
> > >>> checking for a BSD-compatible install... /usr/bin/install -c
> > >>> checking whether build environment is sane... yes
> > >>> checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
> > >>> checking for gawk... gawk
> > >>> checking whether make sets $(MAKE)... yes
> > >>> checking whether make supports nested variables... yes
> > >>> checking whether to enable maintainer-specific portions of  
> > Makefiles... yes  
> > >>> checking for gcc... gcc
> > >>> checking whether the C compiler works... yes
> > >>> checking for C compiler default output file name... a.out
> > >>> checking for suffix of executables...
> > >>> checking whether we are cross compiling... no
> > >>> checking for suffix of object files... o
> > >>> checking whether we are using the GNU C compiler... yes
> > >>> checking whether gcc accepts -g... yes
> > >>> checking for gcc option to accept ISO C89... none needed
> > >>> checking whether gcc understands -c and -o together... yes
> > >>> checking for style of include used by make... GNU
> > >>> checking dependency style of gcc... none
> > >>> checking for kernel type... Linux
> > >>> checking for linux-based kernel... yes
> > >>> checking kernel version... 4.0.4-301.fc22.x86_64
> > >>> checking for kernel source/headers... not found
> > >>> configure: Unable to find build config in any of:
> > >>>       [/lib/modules/4.0.4-301.fc22.x86_64/source],
> > >>>       [/lib/modules/4.0.4-301.fc22.x86_64/build],
> > >>>       [/usr/src/linux],
> > >>>       [/usr/src/linux-4.0.4-301.fc22.x86_64],
> > >>>       [/usr/src/linux-2.6]
> > >>>
> > >>> configure: error: We could not find the development environment to
> > >>> build modules for the '4.0.4-301.fc22.x86_64' kernel. Please install
> > >>> the kernel source or the kernel development package and try again.
> > >>>
> > >>>
> > >>> Regards,
> > >>>
> > >>> Lokesh Jetty
> > >>>  
> > >>
> > >> Lokesh,
> > >>
> > >> Could you please provide the output from `yum list kernel-devel` and `ls
> > >> /lib/modules`? Its possible that a version that doesn't correspond to
> > >> your running kernel was installed.
> > >>
> > >> Also, you should know that input-wacom-0.30.0 was released several days
> > >> ago and contains support for these tablets (along with a few other
> > >> fixes). If you aren't already, I would suggest downloading the 0.30.0
> > >> tarball from Sourceforge :)
> > >>
> > >> Jason
> > >> ---
> > >> Now instead of four in the eights place /
> > >> you’ve got three, ‘Cause you added one /
> > >> (That is to say, eight) to the two, /
> > >> But you can’t take seven from three, /
> > >> So you look at the sixty-fours....  
> >  


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Intuos Driver Testing (CTL-490, CTH-490, CTL-690, CTH-690)

Lokesh Jetty
thanks Adrian. I am not familiar with kernel patching. I will have to read up a bit on it and will then try it out.

Regards,

Lokesh Jetty

On Sun, Nov 29, 2015 at 3:51 PM, Ioan-Adrian Ratiu <[hidden email]> wrote:
Hello

That is a known kernel issue right now, and there is a proposed fix for it [1].

Can you apply the patch in that message to your kernel and test?

[1] https://lkml.org/lkml/2015/11/20/690


On Sun, 29 Nov 2015 13:37:42 +0530
Lokesh Jetty <[hidden email]> wrote:

> Hi Jason
>
> I had installed input-wacom-0.30.0 on my Arch Linux system two weeks back
> and it was working perfectly at the time. However, when i tried using the
> tablet yesterday, it was not working. If i perform any action with the pen,
> the entire system hangs up. I tried installing 0.30.1 also but it didn't
> make any difference. can that be caused if my kernel was updated during
> this period or could it be some other issue?
>
> Regards,
>
> Lokesh Jetty
>
> On Fri, Nov 13, 2015 at 4:56 AM, Jason Gerecke <[hidden email]> wrote:
>
> > Lokesh,
> >
> > The 0.30.0 driver should install over top of the existing driver. Keep
> > me updated if you have problems.
> >
> > Jason
> > ---
> > Now instead of four in the eights place /
> > you’ve got three, ‘Cause you added one /
> > (That is to say, eight) to the two, /
> > But you can’t take seven from three, /
> > So you look at the sixty-fours....
> >
> > On 11/10/2015 8:12 PM, Lokesh Jetty wrote:
> > > Thanks Jason
> > >
> > > You are right about kernel versions. I had figured it out and
> > > installed the correct version of kernel devel and proceeded with the
> > > steps. However, the system hangs as soon as I try to use the tablet.
> > >
> > > I will try installing the input-wacom-0.30.0 as you suggest. Will I
> > > have to uninstall the driver that i installed earlier?
> > > Regards,
> > >
> > > Lokesh Jetty
> > >
> > >
> > > On Wed, Nov 11, 2015 at 4:51 AM, Jason Gerecke <[hidden email]>
> > wrote:
> > >> On 11/10/2015 9:50 AM, Lokesh Jetty wrote:
> > >>> Hi
> > >>>
> > >>> I am getting the following error when i run autogen.sh. I am running
> > >>> Fedora 22. I installed gcc, kernel-devel as mentioned in the post.
> > >>>
> > >>> ./autogen.sh
> > >>> autoreconf: Entering directory `.'
> > >>> autoreconf: configure.ac: not using Gettext
> > >>> autoreconf: running: aclocal
> > >>> aclocal: warning: couldn't open directory 'm4': No such file or
> > directory
> > >>> autoreconf: configure.ac: tracing
> > >>> autoreconf: configure.ac: not using Libtool
> > >>> autoreconf: running: /usr/bin/autoconf
> > >>> autoreconf: running: /usr/bin/autoheader
> > >>> autoreconf: running: automake --add-missing --copy --no-force
> > >>> configure.ac:11: installing './compile'
> > >>> configure.ac:8: installing './install-sh'
> > >>> configure.ac:8: installing './missing'
> > >>> Makefile.am: installing './INSTALL'
> > >>> autoreconf: Leaving directory `.'
> > >>> checking for a BSD-compatible install... /usr/bin/install -c
> > >>> checking whether build environment is sane... yes
> > >>> checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
> > >>> checking for gawk... gawk
> > >>> checking whether make sets $(MAKE)... yes
> > >>> checking whether make supports nested variables... yes
> > >>> checking whether to enable maintainer-specific portions of
> > Makefiles... yes
> > >>> checking for gcc... gcc
> > >>> checking whether the C compiler works... yes
> > >>> checking for C compiler default output file name... a.out
> > >>> checking for suffix of executables...
> > >>> checking whether we are cross compiling... no
> > >>> checking for suffix of object files... o
> > >>> checking whether we are using the GNU C compiler... yes
> > >>> checking whether gcc accepts -g... yes
> > >>> checking for gcc option to accept ISO C89... none needed
> > >>> checking whether gcc understands -c and -o together... yes
> > >>> checking for style of include used by make... GNU
> > >>> checking dependency style of gcc... none
> > >>> checking for kernel type... Linux
> > >>> checking for linux-based kernel... yes
> > >>> checking kernel version... 4.0.4-301.fc22.x86_64
> > >>> checking for kernel source/headers... not found
> > >>> configure: Unable to find build config in any of:
> > >>>       [/lib/modules/4.0.4-301.fc22.x86_64/source],
> > >>>       [/lib/modules/4.0.4-301.fc22.x86_64/build],
> > >>>       [/usr/src/linux],
> > >>>       [/usr/src/linux-4.0.4-301.fc22.x86_64],
> > >>>       [/usr/src/linux-2.6]
> > >>>
> > >>> configure: error: We could not find the development environment to
> > >>> build modules for the '4.0.4-301.fc22.x86_64' kernel. Please install
> > >>> the kernel source or the kernel development package and try again.
> > >>>
> > >>>
> > >>> Regards,
> > >>>
> > >>> Lokesh Jetty
> > >>>
> > >>
> > >> Lokesh,
> > >>
> > >> Could you please provide the output from `yum list kernel-devel` and `ls
> > >> /lib/modules`? Its possible that a version that doesn't correspond to
> > >> your running kernel was installed.
> > >>
> > >> Also, you should know that input-wacom-0.30.0 was released several days
> > >> ago and contains support for these tablets (along with a few other
> > >> fixes). If you aren't already, I would suggest downloading the 0.30.0
> > >> tarball from Sourceforge :)
> > >>
> > >> Jason
> > >> ---
> > >> Now instead of four in the eights place /
> > >> you’ve got three, ‘Cause you added one /
> > >> (That is to say, eight) to the two, /
> > >> But you can’t take seven from three, /
> > >> So you look at the sixty-fours....
> >



------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss