Quantcast

Using wireless receiver with CTH-690

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Using wireless receiver with CTH-690

Dale Brewe
I installed the recent pre-release input-wacom and got my new CTH-690 working in ubuntu 14.04, and thanks very much for that. However, I tried to go one step further and use the tablet w/ the wacom wireless receiver. I don't really have much clue how I might go about getting this to work. I see in syslog that the system recognizes the wireless receiver, but I don't really know how to get it to recognize that the actual device is the tablet itself. Interestingly, the system responds to the stylus, but in a weird way, like the on-screen pointer motions are way out of scale and extremely sensitive to movements on the tablet.

I would have a vague guess that this is a job for a udev rule, but don't know how to begin writing one for this kind of thing (or most kind of things). I would appreciate any help.

BTW, even tho the tablet works in usb mode, the settings GUI does not, either for this new tablet or an older bamboo I have used. I believe the version of libwacom the system installed is 0.8-1.


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Using wireless receiver with CTH-690

Dale Brewe
Also I see in syslog that the kernel appears to recognize when the wireless tablet is connected:

Oct 20 20:36:05 pc2 kernel: [    2.496134] wacom 0003:056A:0084.0001: hidraw1: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input0
Oct 20 20:36:05 pc2 kernel: [    2.553627] wacom 0003:056A:0084.0002: hidraw2: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input1
Oct 20 20:36:05 pc2 kernel: [    2.553776] wacom 0003:056A:0084.0003: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input2
Oct 20 20:36:25 pc2 kernel: [   22.849010] wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e

________________________________________
From: Dale Brewe <[hidden email]>
Sent: Tuesday, October 20, 2015 7:06 PM
To: [hidden email]
Subject: [Linuxwacom-discuss] Using wireless receiver with CTH-690

I installed the recent pre-release input-wacom and got my new CTH-690 working in ubuntu 14.04, and thanks very much for that. However, I tried to go one step further and use the tablet w/ the wacom wireless receiver. I don't really have much clue how I might go about getting this to work. I see in syslog that the system recognizes the wireless receiver, but I don't really know how to get it to recognize that the actual device is the tablet itself. Interestingly, the system responds to the stylus, but in a weird way, like the on-screen pointer motions are way out of scale and extremely sensitive to movements on the tablet.

I would have a vague guess that this is a job for a udev rule, but don't know how to begin writing one for this kind of thing (or most kind of things). I would appreciate any help.

BTW, even tho the tablet works in usb mode, the settings GUI does not, either for this new tablet or an older bamboo I have used. I believe the version of libwacom the system installed is 0.8-1.


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Using wireless receiver with CTH-690

Ping Cheng-2
Hi Dale,

If you saw "wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e", your CTH-690 should be connected in wireless mode.

I tested a CTH-690 on my Ubuntu 14.04. It works. Following is what I did:

disconnect USB port from the tablet;
plug the wireless dongle to the system;
switch to wireless mode by pressing the wireless power button on the tablet;
move my finger on the tablet, I see cursor moves;
$dmesg

[ 1687.400004] usb 3-1.2: new full-speed USB device number 8 using ehci-pci
[ 1687.497357] usb 3-1.2: New USB device found, idVendor=056a, idProduct=033e
[ 1687.497362] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1687.497365] usb 3-1.2: Product: Intuos PTM
[ 1687.497367] usb 3-1.2: Manufacturer: Wacom Co.,Ltd.
[ 1687.505036] input: Wacom Intuos PT M 2 Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:056A:033E.000D/input/input68
[ 1687.505413] wacom 0003:056A:033E.000D: hidraw6: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input0
[ 1687.506633] input: Wacom Intuos PT M 2 Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input72
[ 1687.506874] input: Wacom Intuos PT M 2 Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input73
[ 1687.507239] wacom 0003:056A:033E.000E: hidraw7: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input1
[ 1688.185264] wacom 0003:056A:0084.000A: wireless tablet disconnected
[ 1691.815263] usb 3-1.1: USB disconnect, device number 7
[ 1707.709967] usb 3-1.2: USB disconnect, device number 8
[ 1721.753354] usb 3-1.1: new full-speed USB device number 9 using ehci-pci
[ 1721.850425] usb 3-1.1: New USB device found, idVendor=056a, idProduct=0084
[ 1721.850429] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1721.850432] usb 3-1.1: Product: Wacom Wireless Receiver
[ 1721.850434] usb 3-1.1: Manufacturer: Wacom Co.,Ltd.
[ 1721.852308] wacom 0003:056A:0084.0010: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1721.907161] wacom 0003:056A:0084.0011: hidraw4: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1721.908644] wacom 0003:056A:0084.0012: hidraw5: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input2
[ 1737.716757] wacom 0003:056A:0084.0010: wireless tablet connected with PID 33e
[ 1737.716859] input: Wacom Intuos PT M 2 (WL) Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:056A:0084.0011/input/input83
[ 1737.717211] input: Wacom Intuos PT M 2 (WL) Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input87
[ 1737.717431] input: Wacom Intuos PT M 2 (WL) Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input88



On Tue, Oct 20, 2015 at 6:45 PM, Dale Brewe <[hidden email]> wrote:
Also I see in syslog that the kernel appears to recognize when the wireless tablet is connected:  

Oct 20 20:36:05 pc2 kernel: [    2.496134] wacom 0003:056A:0084.0001: hidraw1: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input0
Oct 20 20:36:05 pc2 kernel: [    2.553627] wacom 0003:056A:0084.0002: hidraw2: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input1
Oct 20 20:36:05 pc2 kernel: [    2.553776] wacom 0003:056A:0084.0003: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input2
Oct 20 20:36:25 pc2 kernel: [   22.849010] wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e

________________________________________
From: Dale Brewe <[hidden email]>
Sent: Tuesday, October 20, 2015 7:06 PM
To: [hidden email]
Subject: [Linuxwacom-discuss] Using wireless receiver with CTH-690

I installed the recent pre-release input-wacom and got my new CTH-690 working in ubuntu 14.04, and thanks very much for that. However, I tried to go one step further and use the tablet w/ the wacom wireless receiver. I don't really have much clue how I might go about getting this to work. I see in syslog that the system recognizes the wireless receiver, but I don't really know how to get it to recognize that the actual device is the tablet itself. Interestingly, the system responds to the stylus, but in a weird way, like the on-screen pointer motions are way out of scale and extremely sensitive to movements on the tablet.

I would have a vague guess that this is a job for a udev rule, but don't know how to begin writing one for this kind of thing (or most kind of things). I would appreciate any help.

BTW, even tho the tablet works in usb mode, the settings GUI does not, either for this new tablet or an older bamboo I have used. I believe the version of libwacom the system installed is 0.8-1.


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Using wireless receiver with CTH-690

Dale Brewe
Hi
Yes, thanks, I eventually figured out that the device was actually connected after seeing it in syslog. My output from dmesg looks a lot like the one you included. The main problem I have now is that the device appears to be hyper-sensitive to pen motions by like a factor of 10 or even more. What I mean is that if I move the pen in wireless mode by only a few mm, it moves across the entire screen. In usb mode it appears to be quite well calibrated to move across the entire screen if I move from end to end of the grid area on the device.

Another question/issue is, from your email, it sounds as if it should respond to finger motions, but mine does not, either in usb mode or wireless mode.

I should mention that I am not 100% sure the input-wacom installed completely and correctly. When I do sudo make install, it installs to /lib/modules/3.19.0-31-generic/extra/wacom.ko and the device doesn't work. To get it to work, I manually copied to

/lib/modules/3.19.0-31-generic/kernel/drivers/input/tablet/wacom.ko
and
/lib/modules/3.19.0-31-generic/kernel/drivers/hid/wacom.ko

dale

From: Ping Cheng <[hidden email]>
Sent: Wednesday, October 21, 2015 6:40 PM
To: Dale Brewe
Cc: [hidden email]
Subject: Re: [Linuxwacom-discuss] Using wireless receiver with CTH-690
 

Hi Dale,


If you saw "wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e", your CTH-690 should be connected in wireless mode.


I tested a CTH-690 on my Ubuntu 14.04. It works. Following is what I did:


disconnect USB port from the tablet;
plug the wireless dongle to the system;
switch to wireless mode by pressing the wireless power button on the tablet;
move my finger on the tablet, I see cursor moves;
$dmesg

 [ 1687.400004] usb 3-1.2: new full-speed USB device number 8 using ehci-pci
[ 1687.497357] usb 3-1.2: New USB device found, idVendor=056a, idProduct=033e
[ 1687.497362] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1687.497365] usb 3-1.2: Product: Intuos PTM
[ 1687.497367] usb 3-1.2: Manufacturer: Wacom Co.,Ltd.
[ 1687.505036] input: Wacom Intuos PT M 2 Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:056A:033E.000D/input/input68
[ 1687.505413] wacom 0003:056A:033E.000D: hidraw6: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input0
[ 1687.506633] input: Wacom Intuos PT M 2 Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input72
[ 1687.506874] input: Wacom Intuos PT M 2 Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input73
[ 1687.507239] wacom 0003:056A:033E.000E: hidraw7: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input1
[ 1688.185264] wacom 0003:056A:0084.000A: wireless tablet disconnected
[ 1691.815263] usb 3-1.1: USB disconnect, device number 7
[ 1707.709967] usb 3-1.2: USB disconnect, device number 8
[ 1721.753354] usb 3-1.1: new full-speed USB device number 9 using ehci-pci
[ 1721.850425] usb 3-1.1: New USB device found, idVendor=056a, idProduct=0084
[ 1721.850429] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1721.850432] usb 3-1.1: Product: Wacom Wireless Receiver
[ 1721.850434] usb 3-1.1: Manufacturer: Wacom Co.,Ltd.
[ 1721.852308] wacom 0003:056A:0084.0010: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1721.907161] wacom 0003:056A:0084.0011: hidraw4: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1721.908644] wacom 0003:056A:0084.0012: hidraw5: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input2
[ 1737.716757] wacom 0003:056A:0084.0010: wireless tablet connected with PID 33e
[ 1737.716859] input: Wacom Intuos PT M 2 (WL) Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:056A:0084.0011/input/input83
[ 1737.717211] input: Wacom Intuos PT M 2 (WL) Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input87
[ 1737.717431] input: Wacom Intuos PT M 2 (WL) Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input88






On Tue, Oct 20, 2015 at 6:45 PM, Dale Brewe  <[hidden email]> wrote:
 Also I see in syslog that the kernel appears to recognize when the wireless tablet is connected:  

Oct 20 20:36:05 pc2 kernel: [    2.496134] wacom 0003:056A:0084.0001: hidraw1: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input0
Oct 20 20:36:05 pc2 kernel: [    2.553627] wacom 0003:056A:0084.0002: hidraw2: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input1
Oct 20 20:36:05 pc2 kernel: [    2.553776] wacom 0003:056A:0084.0003: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input2
Oct 20 20:36:25 pc2 kernel: [   22.849010] wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e


________________________________________
From: Dale Brewe <[hidden email]>
Sent: Tuesday, October 20, 2015 7:06 PM
To: [hidden email]
Subject: [Linuxwacom-discuss] Using wireless receiver with CTH-690



I installed the recent pre-release input-wacom and got my new CTH-690 working in ubuntu 14.04, and thanks very much for that. However, I tried to go one step further and use the tablet w/ the wacom wireless receiver. I don't really have much clue how I might  go about getting this to work. I see in syslog that the system recognizes the wireless receiver, but I don't really know how to get it to recognize that the actual device is the tablet itself. Interestingly, the system responds to the stylus, but in a weird  way, like the on-screen pointer motions are way out of scale and extremely sensitive to movements on the tablet.

I would have a vague guess that this is a job for a udev rule, but don't know how to begin writing one for this kind of thing (or most kind of things). I would appreciate any help.

BTW, even tho the tablet works in usb mode, the settings GUI does not, either for this new tablet or an older bamboo I have used. I believe the version of libwacom the system installed is 0.8-1.


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
   
     
------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Using wireless receiver with CTH-690

Ping Cheng-2
Hi Dale,

I tested the device again and I see the issue. You are right. It is a bug.

Thank you for your "one step further" effort. We are very grateful for people like you to make that further effort for us.

I have a patch that fixes the issue. I'll email you in a separate message along with the steps to test it. Once we have your tablet work in wireless mode for both pen and touch, I'll submit the patch upstream with your Reported-by and Tested-by credit.

Does that work for you?

Ping

On Wed, Oct 21, 2015 at 8:30 PM, Dale Brewe <[hidden email]> wrote:
Hi
Yes, thanks, I eventually figured out that the device was actually connected after seeing it in syslog. My output from dmesg looks a lot like the one you included. The main problem I have now is that the device appears to be hyper-sensitive to pen motions by like a factor of 10 or even more. What I mean is that if I move the pen in wireless mode by only a few mm, it moves across the entire screen. In usb mode it appears to be quite well calibrated to move across the entire screen if I move from end to end of the grid area on the device.

Another question/issue is, from your email, it sounds as if it should respond to finger motions, but mine does not, either in usb mode or wireless mode.

I should mention that I am not 100% sure the input-wacom installed completely and correctly. When I do sudo make install, it installs to /lib/modules/3.19.0-31-generic/extra/wacom.ko and the device doesn't work. To get it to work, I manually copied to

/lib/modules/3.19.0-31-generic/kernel/drivers/input/tablet/wacom.ko
and
/lib/modules/3.19.0-31-generic/kernel/drivers/hid/wacom.ko

dale

From: Ping Cheng <[hidden email]>
Sent: Wednesday, October 21, 2015 6:40 PM
To: Dale Brewe
Cc: [hidden email]
Subject: Re: [Linuxwacom-discuss] Using wireless receiver with CTH-690
 

Hi Dale,


If you saw "wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e", your CTH-690 should be connected in wireless mode.


I tested a CTH-690 on my Ubuntu 14.04. It works. Following is what I did:


disconnect USB port from the tablet;
plug the wireless dongle to the system;
switch to wireless mode by pressing the wireless power button on the tablet;
move my finger on the tablet, I see cursor moves;
$dmesg

 [ 1687.400004] usb 3-1.2: new full-speed USB device number 8 using ehci-pci
[ 1687.497357] usb 3-1.2: New USB device found, idVendor=056a, idProduct=033e
[ 1687.497362] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1687.497365] usb 3-1.2: Product: Intuos PTM
[ 1687.497367] usb 3-1.2: Manufacturer: Wacom Co.,Ltd.
[ 1687.505036] input: Wacom Intuos PT M 2 Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:056A:033E.000D/input/input68
[ 1687.505413] wacom 0003:056A:033E.000D: hidraw6: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input0
[ 1687.506633] input: Wacom Intuos PT M 2 Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input72
[ 1687.506874] input: Wacom Intuos PT M 2 Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input73
[ 1687.507239] wacom 0003:056A:033E.000E: hidraw7: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input1
[ 1688.185264] wacom 0003:056A:0084.000A: wireless tablet disconnected
[ 1691.815263] usb 3-1.1: USB disconnect, device number 7
[ 1707.709967] usb 3-1.2: USB disconnect, device number 8
[ 1721.753354] usb 3-1.1: new full-speed USB device number 9 using ehci-pci
[ 1721.850425] usb 3-1.1: New USB device found, idVendor=056a, idProduct=0084
[ 1721.850429] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1721.850432] usb 3-1.1: Product: Wacom Wireless Receiver
[ 1721.850434] usb 3-1.1: Manufacturer: Wacom Co.,Ltd.
[ 1721.852308] wacom 0003:056A:0084.0010: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1721.907161] wacom 0003:056A:0084.0011: hidraw4: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1721.908644] wacom 0003:056A:0084.0012: hidraw5: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input2
[ 1737.716757] wacom 0003:056A:0084.0010: wireless tablet connected with PID 33e
[ 1737.716859] input: Wacom Intuos PT M 2 (WL) Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:056A:0084.0011/input/input83
[ 1737.717211] input: Wacom Intuos PT M 2 (WL) Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input87
[ 1737.717431] input: Wacom Intuos PT M 2 (WL) Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input88


On Tue, Oct 20, 2015 at 6:45 PM, Dale Brewe  <[hidden email]> wrote:
 Also I see in syslog that the kernel appears to recognize when the wireless tablet is connected:  

Oct 20 20:36:05 pc2 kernel: [    2.496134] wacom 0003:056A:0084.0001: hidraw1: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input0
Oct 20 20:36:05 pc2 kernel: [    2.553627] wacom 0003:056A:0084.0002: hidraw2: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input1
Oct 20 20:36:05 pc2 kernel: [    2.553776] wacom 0003:056A:0084.0003: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input2
Oct 20 20:36:25 pc2 kernel: [   22.849010] wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e


________________________________________
From: Dale Brewe <[hidden email]>
Sent: Tuesday, October 20, 2015 7:06 PM
To: [hidden email]
Subject: [Linuxwacom-discuss] Using wireless receiver with CTH-690



I installed the recent pre-release input-wacom and got my new CTH-690 working in ubuntu 14.04, and thanks very much for that. However, I tried to go one step further and use the tablet w/ the wacom wireless receiver. I don't really have much clue how I might  go about getting this to work. I see in syslog that the system recognizes the wireless receiver, but I don't really know how to get it to recognize that the actual device is the tablet itself. Interestingly, the system responds to the stylus, but in a weird  way, like the on-screen pointer motions are way out of scale and extremely sensitive to movements on the tablet.

I would have a vague guess that this is a job for a udev rule, but don't know how to begin writing one for this kind of thing (or most kind of things). I would appreciate any help.

BTW, even tho the tablet works in usb mode, the settings GUI does not, either for this new tablet or an older bamboo I have used. I believe the version of libwacom the system installed is 0.8-1.


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

     


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Using wireless receiver with CTH-690

Dale Brewe

Yes that works for me. Thanks!

Sent from Android




On Thu, Oct 22, 2015 at 10:17 AM -0700, "Ping Cheng" <[hidden email]> wrote:

Hi Dale,

I tested the device again and I see the issue. You are right. It is a bug.

Thank you for your "one step further" effort. We are very grateful for people like you to make that further effort for us.

I have a patch that fixes the issue. I'll email you in a separate message along with the steps to test it. Once we have your tablet work in wireless mode for both pen and touch, I'll submit the patch upstream with your Reported-by and Tested-by credit.

Does that work for you?

Ping

On Wed, Oct 21, 2015 at 8:30 PM, Dale Brewe <[hidden email]> wrote:
Hi
Yes, thanks, I eventually figured out that the device was actually connected after seeing it in syslog. My output from dmesg looks a lot like the one you included. The main problem I have now is that the device appears to be hyper-sensitive to pen motions by like a factor of 10 or even more. What I mean is that if I move the pen in wireless mode by only a few mm, it moves across the entire screen. In usb mode it appears to be quite well calibrated to move across the entire screen if I move from end to end of the grid area on the device.

Another question/issue is, from your email, it sounds as if it should respond to finger motions, but mine does not, either in usb mode or wireless mode.

I should mention that I am not 100% sure the input-wacom installed completely and correctly. When I do sudo make install, it installs to /lib/modules/3.19.0-31-generic/extra/wacom.ko and the device doesn't work. To get it to work, I manually copied to

/lib/modules/3.19.0-31-generic/kernel/drivers/input/tablet/wacom.ko
and
/lib/modules/3.19.0-31-generic/kernel/drivers/hid/wacom.ko

dale

From: Ping Cheng <[hidden email]>
Sent: Wednesday, October 21, 2015 6:40 PM
To: Dale Brewe
Cc: [hidden email]
Subject: Re: [Linuxwacom-discuss] Using wireless receiver with CTH-690
 

Hi Dale,


If you saw "wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e", your CTH-690 should be connected in wireless mode.


I tested a CTH-690 on my Ubuntu 14.04. It works. Following is what I did:


disconnect USB port from the tablet;
plug the wireless dongle to the system;
switch to wireless mode by pressing the wireless power button on the tablet;
move my finger on the tablet, I see cursor moves;
$dmesg

 [ 1687.400004] usb 3-1.2: new full-speed USB device number 8 using ehci-pci
[ 1687.497357] usb 3-1.2: New USB device found, idVendor=056a, idProduct=033e
[ 1687.497362] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1687.497365] usb 3-1.2: Product: Intuos PTM
[ 1687.497367] usb 3-1.2: Manufacturer: Wacom Co.,Ltd.
[ 1687.505036] input: Wacom Intuos PT M 2 Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:056A:033E.000D/input/input68
[ 1687.505413] wacom 0003:056A:033E.000D: hidraw6: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input0
[ 1687.506633] input: Wacom Intuos PT M 2 Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input72
[ 1687.506874] input: Wacom Intuos PT M 2 Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:056A:033E.000E/input/input73
[ 1687.507239] wacom 0003:056A:033E.000E: hidraw7: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTM] on usb-0000:00:1a.0-1.2/input1
[ 1688.185264] wacom 0003:056A:0084.000A: wireless tablet disconnected
[ 1691.815263] usb 3-1.1: USB disconnect, device number 7
[ 1707.709967] usb 3-1.2: USB disconnect, device number 8
[ 1721.753354] usb 3-1.1: new full-speed USB device number 9 using ehci-pci
[ 1721.850425] usb 3-1.1: New USB device found, idVendor=056a, idProduct=0084
[ 1721.850429] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1721.850432] usb 3-1.1: Product: Wacom Wireless Receiver
[ 1721.850434] usb 3-1.1: Manufacturer: Wacom Co.,Ltd.
[ 1721.852308] wacom 0003:056A:0084.0010: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1721.907161] wacom 0003:056A:0084.0011: hidraw4: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1721.908644] wacom 0003:056A:0084.0012: hidraw5: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:1a.0-1.1/input2
[ 1737.716757] wacom 0003:056A:0084.0010: wireless tablet connected with PID 33e
[ 1737.716859] input: Wacom Intuos PT M 2 (WL) Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:056A:0084.0011/input/input83
[ 1737.717211] input: Wacom Intuos PT M 2 (WL) Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input87
[ 1737.717431] input: Wacom Intuos PT M 2 (WL) Pad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:056A:0084.0012/input/input88


On Tue, Oct 20, 2015 at 6:45 PM, Dale Brewe  <[hidden email]> wrote:
 Also I see in syslog that the kernel appears to recognize when the wireless tablet is connected:  

Oct 20 20:36:05 pc2 kernel: [    2.496134] wacom 0003:056A:0084.0001: hidraw1: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input0
Oct 20 20:36:05 pc2 kernel: [    2.553627] wacom 0003:056A:0084.0002: hidraw2: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input1
Oct 20 20:36:05 pc2 kernel: [    2.553776] wacom 0003:056A:0084.0003: hidraw3: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:10.1-1/input2
Oct 20 20:36:25 pc2 kernel: [   22.849010] wacom 0003:056A:0084.0001: wireless tablet connected with PID 33e


________________________________________
From: Dale Brewe <[hidden email]>
Sent: Tuesday, October 20, 2015 7:06 PM
To: [hidden email]
Subject: [Linuxwacom-discuss] Using wireless receiver with CTH-690



I installed the recent pre-release input-wacom and got my new CTH-690 working in ubuntu 14.04, and thanks very much for that. However, I tried to go one step further and use the tablet w/ the wacom wireless receiver. I don't really have much clue how I might  go about getting this to work. I see in syslog that the system recognizes the wireless receiver, but I don't really know how to get it to recognize that the actual device is the tablet itself. Interestingly, the system responds to the stylus, but in a weird  way, like the on-screen pointer motions are way out of scale and extremely sensitive to movements on the tablet.

I would have a vague guess that this is a job for a udev rule, but don't know how to begin writing one for this kind of thing (or most kind of things). I would appreciate any help.

BTW, even tho the tablet works in usb mode, the settings GUI does not, either for this new tablet or an older bamboo I have used. I believe the version of libwacom the system installed is 0.8-1.


------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

     


------------------------------------------------------------------------------

_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Loading...