Wacom Draw not recognized

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Wacom Draw not recognized

Alberto

Hello,

I've just bought a Wacom Draw tablet.
I use Debian GNU/Linux stretch, kernel 4.9.25.
When i plug the tablet it is identified by the kernel and the kernel
module "wacom" is automatically loaded.

This is what I have in /var/log/messages:

Jun  3 11:49:36 io kernel: [ 2158.760095] usb 3-1: new full-speed USB
device number 6 using uhci_hcd
Jun  3 11:49:37 io kernel: [ 2158.938724] usb 3-1: New USB device
found, idVendor=056a, idProduct=033b
Jun  3 11:49:37 io kernel: [ 2158.938734] usb 3-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
Jun  3 11:49:37 io kernel: [ 2158.938739] usb 3-1: Product: Intuos PS
Jun  3 11:49:37 io kernel: [ 2158.938743] usb 3-1: Manufacturer: Wacom
Co.,Ltd.
Jun  3 11:49:37 io kernel: [ 2158.950165] input: Wacom Intuos S 2 Pen
as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
1:1.0/0003:056A:033B.0010/input/input32
Jun  3 11:49:37 io kernel: [ 2158.950421] wacom 0003:056A:033B.0010:
hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
0000:00:1d.0-1/input0
Jun  3 11:49:37 io kernel: [ 2158.953353] input: Wacom Intuos S 2 Pad
as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
1:1.1/0003:056A:033B.0011/input/input37
Jun  3 11:49:37 io kernel: [ 2158.953680] wacom 0003:056A:033B.0011:
hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
0000:00:1d.0-1/input1
Jun  3 11:49:37 io mtp-probe: checking bus 3, device 6:
"/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1"
Jun  3 11:49:37 io mtp-probe: bus: 3, device: 6 was not an MTP device


libwacom-list-local-devices returns the following:

> [Device]
> Name=Wacom Serial Tablet WACf004
> DeviceMatch=serial:0000:0000;
> Class=ISDV4
> Width=0
> Height=0
> IntegratedIn=Display;System;
> Styli=0xfffff;0xffffe;
>
> [Features]
> Reversible=false
> Stylus=true
> Ring=false
> Ring2=false
> Touch=false
> TouchSwitch=false
> StatusLEDs=
> NumStrips=0
> Buttons=0
> ---------------------------------------------------------------
> [Device]
> Name=Intuos Pen Small
> DeviceMatch=usb:056a:033b;
> Class=Intuos
> Width=6
> Height=4
> IntegratedIn=
> Layout=intuos-s-p2.svg
> Styli=0x8e2;
>
> [Features]
> Reversible=false
> Stylus=true
> Ring=false
> Ring2=false
> Touch=false
> TouchSwitch=false
> StatusLEDs=
> NumStrips=0
> Buttons=4
> [Buttons]
> Left=
> Right=
> Top=A;B;C;D;
> Bottom=
> Touchstrip=
> Touchstrip2=
> OLEDs=
> Ring=
> Ring2=
> RingNumModes=0
> Ring2NumModes=0
> StripsNumModes=0
>
> ---------------------------------------------------------------
> [Device]
> Name=Intuos Pen Small
> DeviceMatch=usb:056a:033b;
> Class=Intuos
> Width=6
> Height=4
> IntegratedIn=
> Layout=intuos-s-p2.svg
> Styli=0x8e2;
>
> [Features]
> Reversible=false
> Stylus=true
> Ring=false
> Ring2=false
> Touch=false
> TouchSwitch=false
> StatusLEDs=
> NumStrips=0
> Buttons=4
> [Buttons]
> Left=
> Right=
> Top=A;B;C;D;
> Bottom=
> Touchstrip=
> Touchstrip2=
> OLEDs=
> Ring=
> Ring2=
> RingNumModes=0
> Ring2NumModes=0
> StripsNumModes=0
>
> ---------------------------------------------------------------
>

Therefore, it seems all fine.

But "xsetwacom list devices" returns an empty list. Likewise, gnome
control center does not recognize any tablet.

I have not xorg.conf file in /etc. But there is
/usr/share/X11/xorg.conf.d/70-wacom.conf that contains several entries.
The following seem to me sufficient:

Section "InputClass"
        Identifier "Wacom USB tablet class"
        MatchUSBID "056a:*"
        MatchDevicePath "/dev/input/event*"
        MatchIsTablet "true"
        Driver "wacom"
EndSection

Section "InputClass"
        Identifier "Wacom USB touchscreen class"
        MatchUSBID "056a:*"
        MatchDevicePath "/dev/input/event*"
        MatchIsTouchscreen "true"
        Driver "wacom"
EndSection

Section "InputClass"
        Identifier "Wacom USB touchpad class"
        MatchUSBID "056a:*"
        MatchDevicePath "/dev/input/event*"
        MatchIsTouchpad "true"
        Driver "wacom"
EndSection


Any suggest?

Regards

Alberto
 

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Wacom Draw not recognized

Aaron Armstrong Skomra
Hi Alberto,

Just to nail down the exact issue, does the tablet work when you use
it in a drawing application (and/or does it move the cursor on the
desktop)?

Best,
Aaron

On Sat, Jun 3, 2017 at 3:07 AM, Alberto <[hidden email]> wrote:

>
> Hello,
>
> I've just bought a Wacom Draw tablet.
> I use Debian GNU/Linux stretch, kernel 4.9.25.
> When i plug the tablet it is identified by the kernel and the kernel
> module "wacom" is automatically loaded.
>
> This is what I have in /var/log/messages:
>
> Jun  3 11:49:36 io kernel: [ 2158.760095] usb 3-1: new full-speed USB
> device number 6 using uhci_hcd
> Jun  3 11:49:37 io kernel: [ 2158.938724] usb 3-1: New USB device
> found, idVendor=056a, idProduct=033b
> Jun  3 11:49:37 io kernel: [ 2158.938734] usb 3-1: New USB device
> strings: Mfr=1, Product=2, SerialNumber=0
> Jun  3 11:49:37 io kernel: [ 2158.938739] usb 3-1: Product: Intuos PS
> Jun  3 11:49:37 io kernel: [ 2158.938743] usb 3-1: Manufacturer: Wacom
> Co.,Ltd.
> Jun  3 11:49:37 io kernel: [ 2158.950165] input: Wacom Intuos S 2 Pen
> as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
> 1:1.0/0003:056A:033B.0010/input/input32
> Jun  3 11:49:37 io kernel: [ 2158.950421] wacom 0003:056A:033B.0010:
> hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
> 0000:00:1d.0-1/input0
> Jun  3 11:49:37 io kernel: [ 2158.953353] input: Wacom Intuos S 2 Pad
> as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
> 1:1.1/0003:056A:033B.0011/input/input37
> Jun  3 11:49:37 io kernel: [ 2158.953680] wacom 0003:056A:033B.0011:
> hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
> 0000:00:1d.0-1/input1
> Jun  3 11:49:37 io mtp-probe: checking bus 3, device 6:
> "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1"
> Jun  3 11:49:37 io mtp-probe: bus: 3, device: 6 was not an MTP device
>
>
> libwacom-list-local-devices returns the following:
>
>> [Device]
>> Name=Wacom Serial Tablet WACf004
>> DeviceMatch=serial:0000:0000;
>> Class=ISDV4
>> Width=0
>> Height=0
>> IntegratedIn=Display;System;
>> Styli=0xfffff;0xffffe;
>>
>> [Features]
>> Reversible=false
>> Stylus=true
>> Ring=false
>> Ring2=false
>> Touch=false
>> TouchSwitch=false
>> StatusLEDs=
>> NumStrips=0
>> Buttons=0
>> ---------------------------------------------------------------
>> [Device]
>> Name=Intuos Pen Small
>> DeviceMatch=usb:056a:033b;
>> Class=Intuos
>> Width=6
>> Height=4
>> IntegratedIn=
>> Layout=intuos-s-p2.svg
>> Styli=0x8e2;
>>
>> [Features]
>> Reversible=false
>> Stylus=true
>> Ring=false
>> Ring2=false
>> Touch=false
>> TouchSwitch=false
>> StatusLEDs=
>> NumStrips=0
>> Buttons=4
>> [Buttons]
>> Left=
>> Right=
>> Top=A;B;C;D;
>> Bottom=
>> Touchstrip=
>> Touchstrip2=
>> OLEDs=
>> Ring=
>> Ring2=
>> RingNumModes=0
>> Ring2NumModes=0
>> StripsNumModes=0
>>
>> ---------------------------------------------------------------
>> [Device]
>> Name=Intuos Pen Small
>> DeviceMatch=usb:056a:033b;
>> Class=Intuos
>> Width=6
>> Height=4
>> IntegratedIn=
>> Layout=intuos-s-p2.svg
>> Styli=0x8e2;
>>
>> [Features]
>> Reversible=false
>> Stylus=true
>> Ring=false
>> Ring2=false
>> Touch=false
>> TouchSwitch=false
>> StatusLEDs=
>> NumStrips=0
>> Buttons=4
>> [Buttons]
>> Left=
>> Right=
>> Top=A;B;C;D;
>> Bottom=
>> Touchstrip=
>> Touchstrip2=
>> OLEDs=
>> Ring=
>> Ring2=
>> RingNumModes=0
>> Ring2NumModes=0
>> StripsNumModes=0
>>
>> ---------------------------------------------------------------
>>
>
> Therefore, it seems all fine.
>
> But "xsetwacom list devices" returns an empty list. Likewise, gnome
> control center does not recognize any tablet.
>
> I have not xorg.conf file in /etc. But there is
> /usr/share/X11/xorg.conf.d/70-wacom.conf that contains several entries.
> The following seem to me sufficient:
>
> Section "InputClass"
>         Identifier "Wacom USB tablet class"
>         MatchUSBID "056a:*"
>         MatchDevicePath "/dev/input/event*"
>         MatchIsTablet "true"
>         Driver "wacom"
> EndSection
>
> Section "InputClass"
>         Identifier "Wacom USB touchscreen class"
>         MatchUSBID "056a:*"
>         MatchDevicePath "/dev/input/event*"
>         MatchIsTouchscreen "true"
>         Driver "wacom"
> EndSection
>
> Section "InputClass"
>         Identifier "Wacom USB touchpad class"
>         MatchUSBID "056a:*"
>         MatchDevicePath "/dev/input/event*"
>         MatchIsTouchpad "true"
>         Driver "wacom"
> EndSection
>
>
> Any suggest?
>
> Regards
>
> Alberto
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Linuxwacom-discuss mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Wacom Draw not recognized

Alberto

Hi Aaron,

tha tablet moves the cursor on the desktop and in every application.
It works in Libreoffice Draw.
It doesn't work in Gimp and in Inkscape. In both applications, it is not present
in the list of input devices.

Regards

Alberto



On Mon, 2017-06-05 at 08:51 -0700, Aaron Armstrong Skomra wrote:

> Hi Alberto,
>
> Just to nail down the exact issue, does the tablet work when you use
> it in a drawing application (and/or does it move the cursor on the
> desktop)?
>
> Best,
> Aaron
>
> On Sat, Jun 3, 2017 at 3:07 AM, Alberto <[hidden email]> wrote:
> >
> > Hello,
> >
> > I've just bought a Wacom Draw tablet.
> > I use Debian GNU/Linux stretch, kernel 4.9.25.
> > When i plug the tablet it is identified by the kernel and the kernel
> > module "wacom" is automatically loaded.
> >
> > This is what I have in /var/log/messages:
> >
> > Jun  3 11:49:36 io kernel: [ 2158.760095] usb 3-1: new full-speed USB
> > device number 6 using uhci_hcd
> > Jun  3 11:49:37 io kernel: [ 2158.938724] usb 3-1: New USB device
> > found, idVendor=056a, idProduct=033b
> > Jun  3 11:49:37 io kernel: [ 2158.938734] usb 3-1: New USB device
> > strings: Mfr=1, Product=2, SerialNumber=0
> > Jun  3 11:49:37 io kernel: [ 2158.938739] usb 3-1: Product: Intuos PS
> > Jun  3 11:49:37 io kernel: [ 2158.938743] usb 3-1: Manufacturer: Wacom
> > Co.,Ltd.
> > Jun  3 11:49:37 io kernel: [ 2158.950165] input: Wacom Intuos S 2 Pen
> > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
> > 1:1.0/0003:056A:033B.0010/input/input32
> > Jun  3 11:49:37 io kernel: [ 2158.950421] wacom 0003:056A:033B.0010:
> > hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
> > 0000:00:1d.0-1/input0
> > Jun  3 11:49:37 io kernel: [ 2158.953353] input: Wacom Intuos S 2 Pad
> > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
> > 1:1.1/0003:056A:033B.0011/input/input37
> > Jun  3 11:49:37 io kernel: [ 2158.953680] wacom 0003:056A:033B.0011:
> > hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
> > 0000:00:1d.0-1/input1
> > Jun  3 11:49:37 io mtp-probe: checking bus 3, device 6:
> > "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1"
> > Jun  3 11:49:37 io mtp-probe: bus: 3, device: 6 was not an MTP device
> >
> >
> > libwacom-list-local-devices returns the following:
> >
> > > [Device]
> > > Name=Wacom Serial Tablet WACf004
> > > DeviceMatch=serial:0000:0000;
> > > Class=ISDV4
> > > Width=0
> > > Height=0
> > > IntegratedIn=Display;System;
> > > Styli=0xfffff;0xffffe;
> > >
> > > [Features]
> > > Reversible=false
> > > Stylus=true
> > > Ring=false
> > > Ring2=false
> > > Touch=false
> > > TouchSwitch=false
> > > StatusLEDs=
> > > NumStrips=0
> > > Buttons=0
> > > ---------------------------------------------------------------
> > > [Device]
> > > Name=Intuos Pen Small
> > > DeviceMatch=usb:056a:033b;
> > > Class=Intuos
> > > Width=6
> > > Height=4
> > > IntegratedIn=
> > > Layout=intuos-s-p2.svg
> > > Styli=0x8e2;
> > >
> > > [Features]
> > > Reversible=false
> > > Stylus=true
> > > Ring=false
> > > Ring2=false
> > > Touch=false
> > > TouchSwitch=false
> > > StatusLEDs=
> > > NumStrips=0
> > > Buttons=4
> > > [Buttons]
> > > Left=
> > > Right=
> > > Top=A;B;C;D;
> > > Bottom=
> > > Touchstrip=
> > > Touchstrip2=
> > > OLEDs=
> > > Ring=
> > > Ring2=
> > > RingNumModes=0
> > > Ring2NumModes=0
> > > StripsNumModes=0
> > >
> > > ---------------------------------------------------------------
> > > [Device]
> > > Name=Intuos Pen Small
> > > DeviceMatch=usb:056a:033b;
> > > Class=Intuos
> > > Width=6
> > > Height=4
> > > IntegratedIn=
> > > Layout=intuos-s-p2.svg
> > > Styli=0x8e2;
> > >
> > > [Features]
> > > Reversible=false
> > > Stylus=true
> > > Ring=false
> > > Ring2=false
> > > Touch=false
> > > TouchSwitch=false
> > > StatusLEDs=
> > > NumStrips=0
> > > Buttons=4
> > > [Buttons]
> > > Left=
> > > Right=
> > > Top=A;B;C;D;
> > > Bottom=
> > > Touchstrip=
> > > Touchstrip2=
> > > OLEDs=
> > > Ring=
> > > Ring2=
> > > RingNumModes=0
> > > Ring2NumModes=0
> > > StripsNumModes=0
> > >
> > > ---------------------------------------------------------------
> > >
> >
> > Therefore, it seems all fine.
> >
> > But "xsetwacom list devices" returns an empty list. Likewise, gnome
> > control center does not recognize any tablet.
> >
> > I have not xorg.conf file in /etc. But there is
> > /usr/share/X11/xorg.conf.d/70-wacom.conf that contains several entries.
> > The following seem to me sufficient:
> >
> > Section "InputClass"
> >         Identifier "Wacom USB tablet class"
> >         MatchUSBID "056a:*"
> >         MatchDevicePath "/dev/input/event*"
> >         MatchIsTablet "true"
> >         Driver "wacom"
> > EndSection
> >
> > Section "InputClass"
> >         Identifier "Wacom USB touchscreen class"
> >         MatchUSBID "056a:*"
> >         MatchDevicePath "/dev/input/event*"
> >         MatchIsTouchscreen "true"
> >         Driver "wacom"
> > EndSection
> >
> > Section "InputClass"
> >         Identifier "Wacom USB touchpad class"
> >         MatchUSBID "056a:*"
> >         MatchDevicePath "/dev/input/event*"
> >         MatchIsTouchpad "true"
> >         Driver "wacom"
> > EndSection
> >
> >
> > Any suggest?
> >
> > Regards
> >
> > Alberto
> >
> >
> > ----------------------------------------------------------------------------
> > --
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > _______________________________________________
> > Linuxwacom-discuss mailing list
> > [hidden email]
> > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Wacom Draw not recognized

Jason Gerecke
Alberto,

Since the cursor is moving, it is possible that another driver is
taking control of the device. Could you please verify that the
xserver-xorg-input-wacom package is installed? If it is, please attach
your Xorg.0.log (under either the ~/.local/share/xorg/ or /var/log
directory) for review.

Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one  /
(That is to say, eight) to the two,     /
But you can’t take seven from three,    /
So you look at the sixty-fours....



On Mon, Jun 5, 2017 at 9:07 AM, Alberto <[hidden email]> wrote:

>
> Hi Aaron,
>
> tha tablet moves the cursor on the desktop and in every application.
> It works in Libreoffice Draw.
> It doesn't work in Gimp and in Inkscape. In both applications, it is not present
> in the list of input devices.
>
> Regards
>
> Alberto
>
>
>
> On Mon, 2017-06-05 at 08:51 -0700, Aaron Armstrong Skomra wrote:
>> Hi Alberto,
>>
>> Just to nail down the exact issue, does the tablet work when you use
>> it in a drawing application (and/or does it move the cursor on the
>> desktop)?
>>
>> Best,
>> Aaron
>>
>> On Sat, Jun 3, 2017 at 3:07 AM, Alberto <[hidden email]> wrote:
>> >
>> > Hello,
>> >
>> > I've just bought a Wacom Draw tablet.
>> > I use Debian GNU/Linux stretch, kernel 4.9.25.
>> > When i plug the tablet it is identified by the kernel and the kernel
>> > module "wacom" is automatically loaded.
>> >
>> > This is what I have in /var/log/messages:
>> >
>> > Jun  3 11:49:36 io kernel: [ 2158.760095] usb 3-1: new full-speed USB
>> > device number 6 using uhci_hcd
>> > Jun  3 11:49:37 io kernel: [ 2158.938724] usb 3-1: New USB device
>> > found, idVendor=056a, idProduct=033b
>> > Jun  3 11:49:37 io kernel: [ 2158.938734] usb 3-1: New USB device
>> > strings: Mfr=1, Product=2, SerialNumber=0
>> > Jun  3 11:49:37 io kernel: [ 2158.938739] usb 3-1: Product: Intuos PS
>> > Jun  3 11:49:37 io kernel: [ 2158.938743] usb 3-1: Manufacturer: Wacom
>> > Co.,Ltd.
>> > Jun  3 11:49:37 io kernel: [ 2158.950165] input: Wacom Intuos S 2 Pen
>> > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
>> > 1:1.0/0003:056A:033B.0010/input/input32
>> > Jun  3 11:49:37 io kernel: [ 2158.950421] wacom 0003:056A:033B.0010:
>> > hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
>> > 0000:00:1d.0-1/input0
>> > Jun  3 11:49:37 io kernel: [ 2158.953353] input: Wacom Intuos S 2 Pad
>> > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
>> > 1:1.1/0003:056A:033B.0011/input/input37
>> > Jun  3 11:49:37 io kernel: [ 2158.953680] wacom 0003:056A:033B.0011:
>> > hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
>> > 0000:00:1d.0-1/input1
>> > Jun  3 11:49:37 io mtp-probe: checking bus 3, device 6:
>> > "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1"
>> > Jun  3 11:49:37 io mtp-probe: bus: 3, device: 6 was not an MTP device
>> >
>> >
>> > libwacom-list-local-devices returns the following:
>> >
>> > > [Device]
>> > > Name=Wacom Serial Tablet WACf004
>> > > DeviceMatch=serial:0000:0000;
>> > > Class=ISDV4
>> > > Width=0
>> > > Height=0
>> > > IntegratedIn=Display;System;
>> > > Styli=0xfffff;0xffffe;
>> > >
>> > > [Features]
>> > > Reversible=false
>> > > Stylus=true
>> > > Ring=false
>> > > Ring2=false
>> > > Touch=false
>> > > TouchSwitch=false
>> > > StatusLEDs=
>> > > NumStrips=0
>> > > Buttons=0
>> > > ---------------------------------------------------------------
>> > > [Device]
>> > > Name=Intuos Pen Small
>> > > DeviceMatch=usb:056a:033b;
>> > > Class=Intuos
>> > > Width=6
>> > > Height=4
>> > > IntegratedIn=
>> > > Layout=intuos-s-p2.svg
>> > > Styli=0x8e2;
>> > >
>> > > [Features]
>> > > Reversible=false
>> > > Stylus=true
>> > > Ring=false
>> > > Ring2=false
>> > > Touch=false
>> > > TouchSwitch=false
>> > > StatusLEDs=
>> > > NumStrips=0
>> > > Buttons=4
>> > > [Buttons]
>> > > Left=
>> > > Right=
>> > > Top=A;B;C;D;
>> > > Bottom=
>> > > Touchstrip=
>> > > Touchstrip2=
>> > > OLEDs=
>> > > Ring=
>> > > Ring2=
>> > > RingNumModes=0
>> > > Ring2NumModes=0
>> > > StripsNumModes=0
>> > >
>> > > ---------------------------------------------------------------
>> > > [Device]
>> > > Name=Intuos Pen Small
>> > > DeviceMatch=usb:056a:033b;
>> > > Class=Intuos
>> > > Width=6
>> > > Height=4
>> > > IntegratedIn=
>> > > Layout=intuos-s-p2.svg
>> > > Styli=0x8e2;
>> > >
>> > > [Features]
>> > > Reversible=false
>> > > Stylus=true
>> > > Ring=false
>> > > Ring2=false
>> > > Touch=false
>> > > TouchSwitch=false
>> > > StatusLEDs=
>> > > NumStrips=0
>> > > Buttons=4
>> > > [Buttons]
>> > > Left=
>> > > Right=
>> > > Top=A;B;C;D;
>> > > Bottom=
>> > > Touchstrip=
>> > > Touchstrip2=
>> > > OLEDs=
>> > > Ring=
>> > > Ring2=
>> > > RingNumModes=0
>> > > Ring2NumModes=0
>> > > StripsNumModes=0
>> > >
>> > > ---------------------------------------------------------------
>> > >
>> >
>> > Therefore, it seems all fine.
>> >
>> > But "xsetwacom list devices" returns an empty list. Likewise, gnome
>> > control center does not recognize any tablet.
>> >
>> > I have not xorg.conf file in /etc. But there is
>> > /usr/share/X11/xorg.conf.d/70-wacom.conf that contains several entries.
>> > The following seem to me sufficient:
>> >
>> > Section "InputClass"
>> >         Identifier "Wacom USB tablet class"
>> >         MatchUSBID "056a:*"
>> >         MatchDevicePath "/dev/input/event*"
>> >         MatchIsTablet "true"
>> >         Driver "wacom"
>> > EndSection
>> >
>> > Section "InputClass"
>> >         Identifier "Wacom USB touchscreen class"
>> >         MatchUSBID "056a:*"
>> >         MatchDevicePath "/dev/input/event*"
>> >         MatchIsTouchscreen "true"
>> >         Driver "wacom"
>> > EndSection
>> >
>> > Section "InputClass"
>> >         Identifier "Wacom USB touchpad class"
>> >         MatchUSBID "056a:*"
>> >         MatchDevicePath "/dev/input/event*"
>> >         MatchIsTouchpad "true"
>> >         Driver "wacom"
>> > EndSection
>> >
>> >
>> > Any suggest?
>> >
>> > Regards
>> >
>> > Alberto
>> >
>> >
>> > ----------------------------------------------------------------------------
>> > --
>> > Check out the vibrant tech community on one of the world's most
>> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> > _______________________________________________
>> > Linuxwacom-discuss mailing list
>> > [hidden email]
>> > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Linuxwacom-discuss mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Wacom Draw not recognized

Aaron Armstrong Skomra
Hi Alberto,

I didn't know Debian was offering Wayland as an option, but I
installed Strech-rc4 in a VM and saw it there today. It's also
possible that you selected "GNOME on Wayland" from the login menu
instead of plain "GNOME".  If that's the case, Wacom support is
missing from many (most?) apps on Wayland, and you'll want to switch
back to plain "GNOME" running xorg.

Best,
Aaron

On Mon, Jun 5, 2017 at 2:54 PM, Jason Gerecke <[hidden email]> wrote:

> Alberto,
>
> Since the cursor is moving, it is possible that another driver is
> taking control of the device. Could you please verify that the
> xserver-xorg-input-wacom package is installed? If it is, please attach
> your Xorg.0.log (under either the ~/.local/share/xorg/ or /var/log
> directory) for review.
>
> Jason
> ---
> Now instead of four in the eights place /
> you’ve got three, ‘Cause you added one  /
> (That is to say, eight) to the two,     /
> But you can’t take seven from three,    /
> So you look at the sixty-fours....
>
>
>
> On Mon, Jun 5, 2017 at 9:07 AM, Alberto <[hidden email]> wrote:
>>
>> Hi Aaron,
>>
>> tha tablet moves the cursor on the desktop and in every application.
>> It works in Libreoffice Draw.
>> It doesn't work in Gimp and in Inkscape. In both applications, it is not present
>> in the list of input devices.
>>
>> Regards
>>
>> Alberto
>>
>>
>>
>> On Mon, 2017-06-05 at 08:51 -0700, Aaron Armstrong Skomra wrote:
>>> Hi Alberto,
>>>
>>> Just to nail down the exact issue, does the tablet work when you use
>>> it in a drawing application (and/or does it move the cursor on the
>>> desktop)?
>>>
>>> Best,
>>> Aaron
>>>
>>> On Sat, Jun 3, 2017 at 3:07 AM, Alberto <[hidden email]> wrote:
>>> >
>>> > Hello,
>>> >
>>> > I've just bought a Wacom Draw tablet.
>>> > I use Debian GNU/Linux stretch, kernel 4.9.25.
>>> > When i plug the tablet it is identified by the kernel and the kernel
>>> > module "wacom" is automatically loaded.
>>> >
>>> > This is what I have in /var/log/messages:
>>> >
>>> > Jun  3 11:49:36 io kernel: [ 2158.760095] usb 3-1: new full-speed USB
>>> > device number 6 using uhci_hcd
>>> > Jun  3 11:49:37 io kernel: [ 2158.938724] usb 3-1: New USB device
>>> > found, idVendor=056a, idProduct=033b
>>> > Jun  3 11:49:37 io kernel: [ 2158.938734] usb 3-1: New USB device
>>> > strings: Mfr=1, Product=2, SerialNumber=0
>>> > Jun  3 11:49:37 io kernel: [ 2158.938739] usb 3-1: Product: Intuos PS
>>> > Jun  3 11:49:37 io kernel: [ 2158.938743] usb 3-1: Manufacturer: Wacom
>>> > Co.,Ltd.
>>> > Jun  3 11:49:37 io kernel: [ 2158.950165] input: Wacom Intuos S 2 Pen
>>> > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
>>> > 1:1.0/0003:056A:033B.0010/input/input32
>>> > Jun  3 11:49:37 io kernel: [ 2158.950421] wacom 0003:056A:033B.0010:
>>> > hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
>>> > 0000:00:1d.0-1/input0
>>> > Jun  3 11:49:37 io kernel: [ 2158.953353] input: Wacom Intuos S 2 Pad
>>> > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
>>> > 1:1.1/0003:056A:033B.0011/input/input37
>>> > Jun  3 11:49:37 io kernel: [ 2158.953680] wacom 0003:056A:033B.0011:
>>> > hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
>>> > 0000:00:1d.0-1/input1
>>> > Jun  3 11:49:37 io mtp-probe: checking bus 3, device 6:
>>> > "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1"
>>> > Jun  3 11:49:37 io mtp-probe: bus: 3, device: 6 was not an MTP device
>>> >
>>> >
>>> > libwacom-list-local-devices returns the following:
>>> >
>>> > > [Device]
>>> > > Name=Wacom Serial Tablet WACf004
>>> > > DeviceMatch=serial:0000:0000;
>>> > > Class=ISDV4
>>> > > Width=0
>>> > > Height=0
>>> > > IntegratedIn=Display;System;
>>> > > Styli=0xfffff;0xffffe;
>>> > >
>>> > > [Features]
>>> > > Reversible=false
>>> > > Stylus=true
>>> > > Ring=false
>>> > > Ring2=false
>>> > > Touch=false
>>> > > TouchSwitch=false
>>> > > StatusLEDs=
>>> > > NumStrips=0
>>> > > Buttons=0
>>> > > ---------------------------------------------------------------
>>> > > [Device]
>>> > > Name=Intuos Pen Small
>>> > > DeviceMatch=usb:056a:033b;
>>> > > Class=Intuos
>>> > > Width=6
>>> > > Height=4
>>> > > IntegratedIn=
>>> > > Layout=intuos-s-p2.svg
>>> > > Styli=0x8e2;
>>> > >
>>> > > [Features]
>>> > > Reversible=false
>>> > > Stylus=true
>>> > > Ring=false
>>> > > Ring2=false
>>> > > Touch=false
>>> > > TouchSwitch=false
>>> > > StatusLEDs=
>>> > > NumStrips=0
>>> > > Buttons=4
>>> > > [Buttons]
>>> > > Left=
>>> > > Right=
>>> > > Top=A;B;C;D;
>>> > > Bottom=
>>> > > Touchstrip=
>>> > > Touchstrip2=
>>> > > OLEDs=
>>> > > Ring=
>>> > > Ring2=
>>> > > RingNumModes=0
>>> > > Ring2NumModes=0
>>> > > StripsNumModes=0
>>> > >
>>> > > ---------------------------------------------------------------
>>> > > [Device]
>>> > > Name=Intuos Pen Small
>>> > > DeviceMatch=usb:056a:033b;
>>> > > Class=Intuos
>>> > > Width=6
>>> > > Height=4
>>> > > IntegratedIn=
>>> > > Layout=intuos-s-p2.svg
>>> > > Styli=0x8e2;
>>> > >
>>> > > [Features]
>>> > > Reversible=false
>>> > > Stylus=true
>>> > > Ring=false
>>> > > Ring2=false
>>> > > Touch=false
>>> > > TouchSwitch=false
>>> > > StatusLEDs=
>>> > > NumStrips=0
>>> > > Buttons=4
>>> > > [Buttons]
>>> > > Left=
>>> > > Right=
>>> > > Top=A;B;C;D;
>>> > > Bottom=
>>> > > Touchstrip=
>>> > > Touchstrip2=
>>> > > OLEDs=
>>> > > Ring=
>>> > > Ring2=
>>> > > RingNumModes=0
>>> > > Ring2NumModes=0
>>> > > StripsNumModes=0
>>> > >
>>> > > ---------------------------------------------------------------
>>> > >
>>> >
>>> > Therefore, it seems all fine.
>>> >
>>> > But "xsetwacom list devices" returns an empty list. Likewise, gnome
>>> > control center does not recognize any tablet.
>>> >
>>> > I have not xorg.conf file in /etc. But there is
>>> > /usr/share/X11/xorg.conf.d/70-wacom.conf that contains several entries.
>>> > The following seem to me sufficient:
>>> >
>>> > Section "InputClass"
>>> >         Identifier "Wacom USB tablet class"
>>> >         MatchUSBID "056a:*"
>>> >         MatchDevicePath "/dev/input/event*"
>>> >         MatchIsTablet "true"
>>> >         Driver "wacom"
>>> > EndSection
>>> >
>>> > Section "InputClass"
>>> >         Identifier "Wacom USB touchscreen class"
>>> >         MatchUSBID "056a:*"
>>> >         MatchDevicePath "/dev/input/event*"
>>> >         MatchIsTouchscreen "true"
>>> >         Driver "wacom"
>>> > EndSection
>>> >
>>> > Section "InputClass"
>>> >         Identifier "Wacom USB touchpad class"
>>> >         MatchUSBID "056a:*"
>>> >         MatchDevicePath "/dev/input/event*"
>>> >         MatchIsTouchpad "true"
>>> >         Driver "wacom"
>>> > EndSection
>>> >
>>> >
>>> > Any suggest?
>>> >
>>> > Regards
>>> >
>>> > Alberto
>>> >
>>> >
>>> > ----------------------------------------------------------------------------
>>> > --
>>> > Check out the vibrant tech community on one of the world's most
>>> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> > _______________________________________________
>>> > Linuxwacom-discuss mailing list
>>> > [hidden email]
>>> > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Linuxwacom-discuss mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
Reply | Threaded
Open this post in threaded view
|

Re: Wacom Draw not recognized

Alberto

Yes Aaron,
this is the trick!

Using plain GNOME works all fine.

Many many thanks.

Best regards

Alberto


On Mon, 2017-06-05 at 15:01 -0700, Aaron Armstrong Skomra wrote:

> Hi Alberto,
>
> I didn't know Debian was offering Wayland as an option, but I
> installed Strech-rc4 in a VM and saw it there today. It's also
> possible that you selected "GNOME on Wayland" from the login menu
> instead of plain "GNOME".  If that's the case, Wacom support is
> missing from many (most?) apps on Wayland, and you'll want to switch
> back to plain "GNOME" running xorg.
>
> Best,
> Aaron
>
> On Mon, Jun 5, 2017 at 2:54 PM, Jason Gerecke <[hidden email]> wrote:
> > Alberto,
> >
> > Since the cursor is moving, it is possible that another driver is
> > taking control of the device. Could you please verify that the
> > xserver-xorg-input-wacom package is installed? If it is, please attach
> > your Xorg.0.log (under either the ~/.local/share/xorg/ or /var/log
> > directory) for review.
> >
> > Jason
> > ---
> > Now instead of four in the eights place /
> > you’ve got three, ‘Cause you added one  /
> > (That is to say, eight) to the two,     /
> > But you can’t take seven from three,    /
> > So you look at the sixty-fours....
> >
> >
> >
> > On Mon, Jun 5, 2017 at 9:07 AM, Alberto <[hidden email]> wrote:
> > >
> > > Hi Aaron,
> > >
> > > tha tablet moves the cursor on the desktop and in every application.
> > > It works in Libreoffice Draw.
> > > It doesn't work in Gimp and in Inkscape. In both applications, it is not
> > > present
> > > in the list of input devices.
> > >
> > > Regards
> > >
> > > Alberto
> > >
> > >
> > >
> > > On Mon, 2017-06-05 at 08:51 -0700, Aaron Armstrong Skomra wrote:
> > > > Hi Alberto,
> > > >
> > > > Just to nail down the exact issue, does the tablet work when you use
> > > > it in a drawing application (and/or does it move the cursor on the
> > > > desktop)?
> > > >
> > > > Best,
> > > > Aaron
> > > >
> > > > On Sat, Jun 3, 2017 at 3:07 AM, Alberto <[hidden email]>
> > > > wrote:
> > > > >
> > > > > Hello,
> > > > >
> > > > > I've just bought a Wacom Draw tablet.
> > > > > I use Debian GNU/Linux stretch, kernel 4.9.25.
> > > > > When i plug the tablet it is identified by the kernel and the kernel
> > > > > module "wacom" is automatically loaded.
> > > > >
> > > > > This is what I have in /var/log/messages:
> > > > >
> > > > > Jun  3 11:49:36 io kernel: [ 2158.760095] usb 3-1: new full-speed USB
> > > > > device number 6 using uhci_hcd
> > > > > Jun  3 11:49:37 io kernel: [ 2158.938724] usb 3-1: New USB device
> > > > > found, idVendor=056a, idProduct=033b
> > > > > Jun  3 11:49:37 io kernel: [ 2158.938734] usb 3-1: New USB device
> > > > > strings: Mfr=1, Product=2, SerialNumber=0
> > > > > Jun  3 11:49:37 io kernel: [ 2158.938739] usb 3-1: Product: Intuos PS
> > > > > Jun  3 11:49:37 io kernel: [ 2158.938743] usb 3-1: Manufacturer: Wacom
> > > > > Co.,Ltd.
> > > > > Jun  3 11:49:37 io kernel: [ 2158.950165] input: Wacom Intuos S 2 Pen
> > > > > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
> > > > > 1:1.0/0003:056A:033B.0010/input/input32
> > > > > Jun  3 11:49:37 io kernel: [ 2158.950421] wacom 0003:056A:033B.0010:
> > > > > hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
> > > > > 0000:00:1d.0-1/input0
> > > > > Jun  3 11:49:37 io kernel: [ 2158.953353] input: Wacom Intuos S 2 Pad
> > > > > as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-
> > > > > 1:1.1/0003:056A:033B.0011/input/input37
> > > > > Jun  3 11:49:37 io kernel: [ 2158.953680] wacom 0003:056A:033B.0011:
> > > > > hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-
> > > > > 0000:00:1d.0-1/input1
> > > > > Jun  3 11:49:37 io mtp-probe: checking bus 3, device 6:
> > > > > "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1"
> > > > > Jun  3 11:49:37 io mtp-probe: bus: 3, device: 6 was not an MTP device
> > > > >
> > > > >
> > > > > libwacom-list-local-devices returns the following:
> > > > >
> > > > > > [Device]
> > > > > > Name=Wacom Serial Tablet WACf004
> > > > > > DeviceMatch=serial:0000:0000;
> > > > > > Class=ISDV4
> > > > > > Width=0
> > > > > > Height=0
> > > > > > IntegratedIn=Display;System;
> > > > > > Styli=0xfffff;0xffffe;
> > > > > >
> > > > > > [Features]
> > > > > > Reversible=false
> > > > > > Stylus=true
> > > > > > Ring=false
> > > > > > Ring2=false
> > > > > > Touch=false
> > > > > > TouchSwitch=false
> > > > > > StatusLEDs=
> > > > > > NumStrips=0
> > > > > > Buttons=0
> > > > > > ---------------------------------------------------------------
> > > > > > [Device]
> > > > > > Name=Intuos Pen Small
> > > > > > DeviceMatch=usb:056a:033b;
> > > > > > Class=Intuos
> > > > > > Width=6
> > > > > > Height=4
> > > > > > IntegratedIn=
> > > > > > Layout=intuos-s-p2.svg
> > > > > > Styli=0x8e2;
> > > > > >
> > > > > > [Features]
> > > > > > Reversible=false
> > > > > > Stylus=true
> > > > > > Ring=false
> > > > > > Ring2=false
> > > > > > Touch=false
> > > > > > TouchSwitch=false
> > > > > > StatusLEDs=
> > > > > > NumStrips=0
> > > > > > Buttons=4
> > > > > > [Buttons]
> > > > > > Left=
> > > > > > Right=
> > > > > > Top=A;B;C;D;
> > > > > > Bottom=
> > > > > > Touchstrip=
> > > > > > Touchstrip2=
> > > > > > OLEDs=
> > > > > > Ring=
> > > > > > Ring2=
> > > > > > RingNumModes=0
> > > > > > Ring2NumModes=0
> > > > > > StripsNumModes=0
> > > > > >
> > > > > > ---------------------------------------------------------------
> > > > > > [Device]
> > > > > > Name=Intuos Pen Small
> > > > > > DeviceMatch=usb:056a:033b;
> > > > > > Class=Intuos
> > > > > > Width=6
> > > > > > Height=4
> > > > > > IntegratedIn=
> > > > > > Layout=intuos-s-p2.svg
> > > > > > Styli=0x8e2;
> > > > > >
> > > > > > [Features]
> > > > > > Reversible=false
> > > > > > Stylus=true
> > > > > > Ring=false
> > > > > > Ring2=false
> > > > > > Touch=false
> > > > > > TouchSwitch=false
> > > > > > StatusLEDs=
> > > > > > NumStrips=0
> > > > > > Buttons=4
> > > > > > [Buttons]
> > > > > > Left=
> > > > > > Right=
> > > > > > Top=A;B;C;D;
> > > > > > Bottom=
> > > > > > Touchstrip=
> > > > > > Touchstrip2=
> > > > > > OLEDs=
> > > > > > Ring=
> > > > > > Ring2=
> > > > > > RingNumModes=0
> > > > > > Ring2NumModes=0
> > > > > > StripsNumModes=0
> > > > > >
> > > > > > ---------------------------------------------------------------
> > > > > >
> > > > >
> > > > > Therefore, it seems all fine.
> > > > >
> > > > > But "xsetwacom list devices" returns an empty list. Likewise, gnome
> > > > > control center does not recognize any tablet.
> > > > >
> > > > > I have not xorg.conf file in /etc. But there is
> > > > > /usr/share/X11/xorg.conf.d/70-wacom.conf that contains several
> > > > > entries.
> > > > > The following seem to me sufficient:
> > > > >
> > > > > Section "InputClass"
> > > > >         Identifier "Wacom USB tablet class"
> > > > >         MatchUSBID "056a:*"
> > > > >         MatchDevicePath "/dev/input/event*"
> > > > >         MatchIsTablet "true"
> > > > >         Driver "wacom"
> > > > > EndSection
> > > > >
> > > > > Section "InputClass"
> > > > >         Identifier "Wacom USB touchscreen class"
> > > > >         MatchUSBID "056a:*"
> > > > >         MatchDevicePath "/dev/input/event*"
> > > > >         MatchIsTouchscreen "true"
> > > > >         Driver "wacom"
> > > > > EndSection
> > > > >
> > > > > Section "InputClass"
> > > > >         Identifier "Wacom USB touchpad class"
> > > > >         MatchUSBID "056a:*"
> > > > >         MatchDevicePath "/dev/input/event*"
> > > > >         MatchIsTouchpad "true"
> > > > >         Driver "wacom"
> > > > > EndSection
> > > > >
> > > > >
> > > > > Any suggest?
> > > > >
> > > > > Regards
> > > > >
> > > > > Alberto
> > > > >
> > > > >
> > > > > ----------------------------------------------------------------------
> > > > > ------
> > > > > --
> > > > > Check out the vibrant tech community on one of the world's most
> > > > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > > > > _______________________________________________
> > > > > Linuxwacom-discuss mailing list
> > > > > [hidden email]
> > > > > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
> > >
> > > --------------------------------------------------------------------------
> > > ----
> > > Check out the vibrant tech community on one of the world's most
> > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > > _______________________________________________
> > > Linuxwacom-discuss mailing list
> > > [hidden email]
> > > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Linuxwacom-discuss mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss